linkstation_HGLAN: Convert from unused CONFIG_BOOTP_MASK to specific list

[u-boot] / include / configs / omap1510inn.h

diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 9ff4f843ccd6c1f2a8d5420b2adfa4ea41488a6b..1a7e5c7176b38c8498fcf4c6a456529b38f834bd 100644 (file)
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -4,23 +4,7 @@
  * Kshitij Gupta <kshitij@ti.com>
  * Configuation settings for the TI OMAP Innovator board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+ 
  */
 
 #ifndef __CONFIG_H
@@ -38,8 +22,6 @@
 /* input clock of PLL */
 #define CONFIG_SYS_CLK_FREQ    12000000        /* the OMAP1510 Innovator has 12MHz input clock */
 
-#undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff */
-
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_CMDLINE_TAG      1      /* enable passing of ATAGs      */
@@ -59,7 +41,6 @@
 #define CONFIG_SMC9196_BASE 0x08000300
 #define CONFIG_SMC9196_EXT_PHY
 */
-#define CONFIG_NET_MULTI
 #define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x08000300
 #define CONFIG_LAN91C96_EXT_PHY
@@ -84,8 +65,6 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX      1
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 
 /*
  * Command line configuration.
@@ -139,17 +118,6 @@
 #define CONFIG_SYS_PTV         2       /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ          1000
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128*1024)      /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4*1024)        /* FIQ stack */
-#endif
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
@@ -161,6 +129,8 @@
 
 #define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 
+#define PHYS_SRAM              0x20000000
+
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
@@ -190,4 +160,7 @@
 #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 #define CONFIG_ENV_OFFSET              ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN )    /* Environment after Monitor */
 
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR        PHYS_SRAM
+
 #endif /* __CONFIG_H */