Patch by Steven Scholz, 4 Apr 2005:

[u-boot] / include / configs / omap1610h2.h

diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index 2eb65e20811f752871ba0398b0e635b686d93853..c6ca689a5fe04aee8960e834b43d843c719a3a90 100644 (file)
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -26,12 +26,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
-
 /*
  * High Level Configuration Options
  * (easy to change)
@@ -40,6 +34,7 @@
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP1610                1       /* which is in a 1610 */
 #define CONFIG_H2_OMAP1610     1       /* on an H2 Board */
+#define CONFIG_MACH_OMAP_H2            /* Select board mach-type */
 
 /* input clock of PLL */
 /* the OMAP1610 H2 has 12MHz input clock */
@@ -51,6 +46,7 @@
 
 #define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS       1
+#define CONFIG_INITRD_TAG              1
 
 /*
  * Size of malloc() pool
@@ -73,7 +69,7 @@
 #define CFG_NS16550_REG_SIZE   (-4)
 #define CFG_NS16550_CLK        (48000000)              /* can be 12M/32Khz or 48Mhz */
 #define CFG_NS16550_COM1       0xfffb0000      /* uart1, bluetooth uart */
-                                               
+
 /*
  * select serial console configuration
  */
@@ -93,13 +89,9 @@
 #include <configs/omap1510.h>
 
 #define CONFIG_BOOTDELAY       3
-#define CONFIG_BOOTARGS        "mem=32M console=ttyS0,115200n8 noinitrd \
-                               root=/dev/nfs rw nfsroot=157.87.82.48:\
-                               /home/a0875451/mwd/myfs/target ip=dhcp"
-#define CONFIG_NETMASK 255.255.254.0   /* talk on MY local net */
-#define CONFIG_IPADDR  156.117.97.156  /* static IP I currently own */
-#define CONFIG_SERVERIP        156.117.97.139  /* current IP of my dev pc */
-#define CONFIG_BOOTFILE        "uImage"        /* file to load */
+#define CONFIG_BOOTARGS        "console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=dhcp"
+#define CONFIG_BOOTCOMMAND      "bootp;tftp;bootm"
+#define CFG_AUTOLOAD            "n"             /* No autoload */
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200  /* speed to run kgdb serial port */
@@ -145,18 +137,29 @@
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS   1       /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1   0x10000000      /* SDRAM Bank #1 */
+#define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1           0x10000000      /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE      0x02000000      /* 32 MB */
 
-#ifdef CONFIG_CS0_BOOT
-#define PHYS_FLASH_1   0x0C000000
-#endif
-#ifdef CONFIG_CS3_BOOT
-#define PHYS_FLASH_1   0x00000000
+#define PHYS_FLASH_1_BM1       0x00000000      /* Flash Bank #1 if booting from flash */
+#define PHYS_FLASH_1_BM0       0x0C000000      /* Flash Bank #1 if booting from RAM */
+
+#ifdef CONFIG_CS_AUTOBOOT                      /* Determine CS assignment in runtime */
+
+#ifndef __ASSEMBLY__
+extern unsigned long omap_flash_base;          /* set in flash__init */
 #endif
+#define CFG_FLASH_BASE         omap_flash_base
+
+#elif defined(CONFIG_CS0_BOOT)
+
+#define CFG_FLASH_BASE         PHYS_FLASH_1_BM0
 
-#define CFG_FLASH_BASE PHYS_FLASH_1
+#else
+
+#define CFG_FLASH_BASE         PHYS_FLASH_1_BM1
+
+#endif
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization