configs: Migrate CONFIG_USB_STORAGE

[u-boot] / include / configs / omap3_beagle.h

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 8ebb5bd2a3d50a6ba59400899cd4c0c632f000cd..c17dcf5c39bd95b3e09a86fef5d26cb3aff187b9 100644 (file)
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -59,26 +59,18 @@
 #define CONFIG_SYS_I2C_NOPROBES                {{0x0, 0x0}}
 
 /* USB */
-#define CONFIG_MUSB_GADGET
 #define CONFIG_USB_MUSB_OMAP2PLUS
-#define CONFIG_MUSB_PIO_ONLY
-#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_TWL4030_USB             1
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETHER_RNDIS
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_VBUS_DRAW    0
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_G_DNL_VENDOR_NUM                0x0451
-#define CONFIG_G_DNL_PRODUCT_NUM       0xd022
-#define CONFIG_G_DNL_MANUFACTURER      "TI"
+#define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
-#define CONFIG_USB_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
-#define CONFIG_USB_FASTBOOT_BUF_SIZE   0x07000000
+#define CONFIG_FASTBOOT_BUF_ADDR       CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE       0x07000000
 
 /* USB EHCI */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 
 #define CONFIG_USB_EHCI_OMAP
@@ -95,20 +87,14 @@
 #define CONFIG_OMAP3_GPIO_6            /* GPIO160..191 is in GPIO bank 6 */
 
 /* commands to include */
-#define CONFIG_CMD_ASKENV
-
-#define CONFIG_CMD_CACHE
 
 #define MTDIDS_DEFAULT                 "nand0=nand"
 #define MTDPARTS_DEFAULT               "mtdparts=nand:512k(x-loader),"\
                                        "1920k(u-boot),128k(u-boot-env),"\
                                        "4m(kernel),-(fs)"
 
-#define CONFIG_USB_STORAGE     /* USB storage support          */
 #define CONFIG_CMD_NAND                /* NAND support                 */
 #define CONFIG_CMD_LED         /* LED support                  */
-#define CONFIG_CMD_GPIO     /* Enable gpio command */
-#define CONFIG_CMD_DHCP
 
 #define CONFIG_VIDEO_OMAP3     /* DSS Support                  */
 
@@ -120,7 +106,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST     1
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
@@ -289,13 +274,11 @@
 
 #define CONFIG_OMAP3_SPI
 
-#define CONFIG_SYS_CACHELINE_SIZE      64
-
 /* Defines for SPL */
 #define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048