board/BuR: rename tseries board to brppt1

[u-boot] / include / configs / omap3_igep00x0.h

diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 4409103f4912c5b08b5e4e715f8084bd00eba5ad..9bd891586cd86e6b8596535fea995c5a03fae6db 100644 (file)
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -19,7 +19,12 @@
 #include <configs/ti_omap3_common.h>
 #include <asm/mach-types.h>
 
-#undef CONFIG_BOOTDELAY
+/* SRAM starts at 0x40200000 and ends at 0x4020FFFF (64KB) */
+#undef CONFIG_SPL_MAX_SIZE
+#undef CONFIG_SPL_TEXT_BASE
+
+#define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_TEXT_BASE           0x40200000
 
 /*
  * Display CPU and Board information
@@ -43,7 +48,7 @@
 #else
 #error "status LED not defined for this machine."
 #endif
-#define RED_LED_DEV                            0
+#define RED_LED_DEV                    0
 #define STATUS_LED_BIT                 RED_LED_GPIO
 #define STATUS_LED_STATE               STATUS_LED_ON
 #define STATUS_LED_PERIOD              (CONFIG_SYS_HZ / 2)
@@ -56,7 +61,7 @@
 #define CONFIG_OMAP3_GPIO_6            /* GPIO160..191 is in GPIO bank 6 */
 
 /* USB */
-#define CONFIG_USB_MUSB_UDC                    1
+#define CONFIG_USB_MUSB_UDC            1
 #define CONFIG_USB_OMAP3               1
 #define CONFIG_TWL4030_USB             1
 
@@ -71,22 +76,12 @@
 #define CONFIG_USBD_MANUFACTURER       "Texas Instruments"
 #define CONFIG_USBD_PRODUCT_NAME       "IGEP"
 
-#define CONFIG_CMD_CACHE
 #ifdef CONFIG_BOOT_ONENAND
 #define CONFIG_CMD_ONENAND     /* ONENAND support              */
 #endif
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
-    (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
-#endif
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-
-/*#undef CONFIG_ENV_IS_NOWHERE*/
 
 #ifndef CONFIG_SPL_BUILD
 
-#include <config_distro_defaults.h>
-
 /* Environment */
 #define ENV_DEVICE_SETTINGS \
        "stdin=serial\0" \
@@ -103,7 +98,6 @@
 
 #include <config_distro_bootcmd.h>
 
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        ENV_DEVICE_SETTINGS \
        MEM_LAYOUT_SETTINGS \
@@ -138,7 +132,7 @@
 #if defined(CONFIG_CMD_NET)
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE    0x2C000000
+#define CONFIG_SMC911X_BASE            0x2C000000
 #endif /* (CONFIG_CMD_NET) */
 
 /* OneNAND boot config */
@@ -160,12 +154,20 @@
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048
 #define CONFIG_SYS_NAND_OOBSIZE                64
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0
-#define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9,\
-                                               10, 11, 12, 13}
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS         { 2,  3,  4,  5,  6,  7,  8,  9, \
+                                        10, 11, 12, 13, 14, 15, 16, 17, \
+                                        18, 19, 20, 21, 22, 23, 24, 25, \
+                                        26, 27, 28, 29, 30, 31, 32, 33, \
+                                        34, 35, 36, 37, 38, 39, 40, 41, \
+                                        42, 43, 44, 45, 46, 47, 48, 49, \
+                                        50, 51, 52, 53, 54, 55, 56, 57, }
 #define CONFIG_SYS_NAND_ECCSIZE                512
-#define CONFIG_SYS_NAND_ECCBYTES       3
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_HW
+#define CONFIG_SYS_NAND_ECCBYTES       14
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_BCH
+
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT