net: Add SMC911X driver to Kconfig, convert

[u-boot] / include / configs / omap3_overo.h

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 53ff61d10c1f3d655508a4b7ff0f7c1c844e234a..756b50c664f8f2354f0e62a35442efc745dbf0f9 100644 (file)
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -8,19 +8,14 @@
 #define __CONFIG_H
 
 #define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
-#define CONFIG_NAND
 
 #include <configs/ti_omap3_common.h>
-#undef CONFIG_SPL_MAX_SIZE
-#define CONFIG_SPL_MAX_SIZE    (64*1024)
+/*
+ * We are only ever GP parts and will utilize all of the "downloaded image"
+ * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
+ */
 #undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE   0x40200000
-
-#define CONFIG_BCH
-
-/* Display CPU and Board information */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SPL_TEXT_BASE           0x40200000
 
 /* call misc_init_r */
 #define CONFIG_MISC_INIT_R
@@ -36,36 +31,16 @@
 #define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + (128 << 15))
 
 /* I2C Support */
-#define CONFIG_SYS_I2C_OMAP34XX
 
 /* TWL4030 LED */
 #define CONFIG_TWL4030_LED
 
 /* USB EHCI */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_OMAP
-#define CONFIG_USB_STORAGE
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       183
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
-
-/* Initialize GPIOs by default */
-#define CONFIG_OMAP3_GPIO_2    /* GPIO32..63 is in GPIO Bank 2 */
-#define CONFIG_OMAP3_GPIO_3    /* GPIO64..95 is in GPIO Bank 3 */
-#define CONFIG_OMAP3_GPIO_4    /* GPIO96..127 is in GPIO Bank 4 */
-#define CONFIG_OMAP3_GPIO_5    /* GPIO128..159 is in GPIO Bank 5 */
-#define CONFIG_OMAP3_GPIO_6    /* GPIO160..191 is in GPIO Bank 6 */
 
 /* commands to include */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_USB
 
 #ifdef CONFIG_NAND
-#define CONFIG_CMD_UBI         /* UBI-formated MTD partition support */
-#define CONFIG_CMD_UBIFS       /* Read-only UBI volume operations */
-
-#define CONFIG_RBTREE          /* required by CONFIG_CMD_UBI */
-#define CONFIG_LZO             /* required by CONFIG_CMD_UBIFS */
-
 #define CONFIG_MTD_PARTITIONS  /* required for UBI partition support */
 
 /* NAND block size is 128 KiB.  Synchronize these values with
@@ -88,7 +63,6 @@
 #endif /* CONFIG_NAND */
 
 /* Board NAND Info. */
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
                                                        /* to access nand */
 /* Environment information */
@@ -200,28 +174,16 @@
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_ONENAND_BASE                ONENAND_MAP
 
-#define CONFIG_ENV_IS_IN_NAND
 #define ONENAND_ENV_OFFSET             0x240000 /* environment starts here */
-#define SMNAND_ENV_OFFSET              0x240000 /* environment starts here */
-
 #define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
-#define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
-
-/* Configure SMSC9211 ethernet */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE            0x2C000000
-#endif /* (CONFIG_CMD_NET) */
+#define CONFIG_ENV_OFFSET              0x240000
+#define CONFIG_ENV_ADDR                        0x240000
 
 /* Initial RAM setup */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
 #define CONFIG_SYS_INIT_RAM_SIZE       0x800
-#define CONFIG_SYS_CACHELINE_SIZE      64
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_MAX_ECCPOS  56
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
@@ -242,9 +204,7 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS                0x240000
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x280000
-#define CONFIG_CMD_SPL_WRITE_SIZE      0x2000
 #endif
 
 #endif                         /* __CONFIG_H */