configs:Remove unused macro CONFIG_DISCOVER_PHY

[u-boot] / include / configs / omap3_sdp3430.h

diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index 55bbcd4e5fb4c775baa37e5f838155677a607e70..19c6a3d33a0096bec5bae9a8e423c7b828e605f2 100644 (file)
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -36,10 +36,8 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMV7           1       /* This is an ARM V7 CPU core */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
-#define CONFIG_OMAP3430                1       /* which is in a 3430 */
 #define CONFIG_OMAP3_3430SDP   1       /* working with SDP Rev2 */
 
 #define CONFIG_SDRC    /* The chip has SDRC controller */
@@ -63,7 +61,6 @@
 #define V_OSCK                 26000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
 
-#undef CONFIG_USE_IRQ                  /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
@@ -135,13 +132,8 @@
 #define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_SYS_I2C_BUS             0
-#define CONFIG_SYS_I2C_BUS_SELECT      1
 #define CONFIG_DRIVER_OMAP34XX_I2C     1
 
-/* DDR - I use Infineon DDR */
-#define CONFIG_OMAP3_INFINEON_DDR      1
-
 /* OMITTED:  single 1 Gbit MT29F1G NAND flash */
 
 /*
@@ -190,8 +182,9 @@
  */
 
 #if defined(CONFIG_CMD_MMC)
+#define CONFIG_GENERIC_MMC             1
 #define CONFIG_MMC                     1
-#define CONFIG_OMAP3_MMC               1
+#define CONFIG_OMAP_HSMMC              1
 #define CONFIG_DOS_PARTITION           1
 #endif
 
@@ -201,7 +194,6 @@
  */
 #if defined(CONFIG_CMD_NET)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE   DEBUG_BASE
 #define CONFIG_LAN91C96_EXT_PHY
@@ -268,9 +260,8 @@
 
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT              "OMAP34XX SDP # "
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
                                        sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -299,17 +290,6 @@
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ                  1000
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 << 10) /* Regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4 << 10) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4 << 10) /* FIQ stack */
-#endif
-
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
 #define CONFIG_SYS_INIT_RAM_SIZE       0x800
@@ -321,12 +301,8 @@
  */
 #define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1           OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE      (32 << 20) /* at least 32 meg */
 #define PHYS_SDRAM_2           OMAP34XX_SDRC_CS1
 
-/* SDRAM Bank Allocation method */
-#define SDRC_R_B_C             1
-
 /*--------------------------------------------------------------------------*/
 
 /*
@@ -359,4 +335,6 @@
  *  - rest for filesystem
  */
 
+#define CONFIG_SYS_CACHELINE_SIZE      64
+
 #endif                         /* __CONFIG_H */