Merge branch 'master' into next

[u-boot] / include / configs / omap3_zoom2.h

diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 1d696b6e154053260b0a0fd092a23876590796e0..5b03fb6987aae7e55f410a451fcd0085beccfdbc 100644 (file)
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -29,7 +29,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*
  * High Level Configuration Options
@@ -43,6 +42,12 @@
 #include <asm/arch/cpu.h>      /* get chip and board defs */
 #include <asm/arch/omap3.h>
 
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO         1
+#define CONFIG_DISPLAY_BOARDINFO       1
+
 /* Clock Defines */
 #define V_OSCK                 26000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
@@ -58,9 +63,9 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_ENV_SIZE                        SZ_128K /* Total Size Environment */
+#define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
                                                /* Sector */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (128 << 10))
 #define CONFIG_SYS_GBL_DATA_SIZE       128     /* bytes reserved for */
                                                /* initial data */
 /*
@@ -93,6 +98,9 @@
 #define CONFIG_OMAP3_MMC               1
 #define CONFIG_DOS_PARTITION           1
 
+/* DDR - I use Micron DDR */
+#define CONFIG_OMAP3_MICRON_DDR                1
+
 /* Status LED */
 #define CONFIG_STATUS_LED              1 /* Status LED enabled */
 #define CONFIG_BOARD_SPECIFIC_LED      1
@@ -109,6 +117,14 @@
 /* Optional value */
 #define STATUS_LED_BOOT                        STATUS_LED_BIT
 
+/* GPIO banks */
+#ifdef CONFIG_STATUS_LED
+#define CONFIG_OMAP3_GPIO_2 /* ZOOM2_LED_BLUE2 */
+#define CONFIG_OMAP3_GPIO_6 /* ZOOM2_LED_RED */
+#endif
+#define CONFIG_OMAP3_GPIO_3 /* board revision */
+#define CONFIG_OMAP3_GPIO_5 /* debug board detection, ZOOM2_LED_BLUE */
+
 /* commands to include */
 #include <config_cmd_default.h>
 
@@ -126,12 +142,19 @@
 #undef CONFIG_CMD_NFS                  /* NFS support                  */
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
 #define CONFIG_SYS_I2C_BUS             0
 #define CONFIG_SYS_I2C_BUS_SELECT      1
 #define CONFIG_DRIVER_OMAP34XX_I2C     1
 
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER           1
+#define CONFIG_TWL4030_LED             1
+
 /*
  * Board NAND Info.
  */
@@ -144,6 +167,8 @@
 #define GPMC_NAND_ECC_LP_x16_LAYOUT    1
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 
+#define CONFIG_SYS_64BIT_VSPRINTF              /* needed for nand_util.c */
+
 /* Environment information */
 #define CONFIG_BOOTDELAY               10
 
@@ -178,10 +203,10 @@
  *
  * The stack sizes are set up in start.S using these settings
  */
-#define CONFIG_STACKSIZE       SZ_128K
+#define CONFIG_STACKSIZE       (128 << 10)     /* regular stack 128 KiB */
 #ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   SZ_4K
-#define CONFIG_STACKSIZE_FIQ   SZ_4K
+#define CONFIG_STACKSIZE_IRQ   (4 << 10)       /* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ   (4 << 10)       /* FIQ stack 4 KiB */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -189,7 +214,7 @@
  */
 #define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1           OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE      SZ_32M  /* at least 32 meg */
+#define PHYS_SDRAM_1_SIZE      (32 << 20)      /* at least 32 MiB */
 #define PHYS_SDRAM_2           OMAP34XX_SDRC_CS1
 
 /* SDRAM Bank Allocation method */
@@ -208,7 +233,7 @@
 #define CONFIG_SYS_MAX_FLASH_SECT      520     /* max number of sectors on */
                                                /* one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
-#define CONFIG_SYS_MONITOR_LEN         SZ_256K /* Reserve 2 sectors */
+#define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
 #define CONFIG_SYS_FLASH_BASE          boot_flash_base
 
@@ -230,8 +255,7 @@
 #define CONFIG_SYS_FLASH_WRITE_TOUT    (100 * CONFIG_SYS_HZ)
 
 #ifndef __ASSEMBLY__
-extern gpmc_csx_t *nand_cs_base;
-extern gpmc_t *gpmc_cfg_base;
+extern struct gpmc *gpmc_cfg;
 extern unsigned int boot_flash_base;
 extern volatile unsigned int boot_flash_env_addr;
 extern unsigned int boot_flash_off;