arm/km: disable ls (through jffs2 support)

[u-boot] / include / configs / omap4_panda.h

diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index a0d27a437d567a309b8165c53357ae86b45f389c..b4e7f411f350c4afbbc5b6cb266072a0c65e0b66 100644 (file)
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -60,6 +60,8 @@
 #define CONFIG_INITRD_TAG              1
 #define CONFIG_REVISION_TAG            1
 
+#define CONFIG_OF_LIBFDT               1
+
 /*
  * Size of malloc() pool
  * Total Size Environment - 256k
@@ -67,8 +69,6 @@
  */
 #define CONFIG_ENV_SIZE                        (256 << 10)
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (256 << 10))
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* bytes reserved for */
-                                               /* initial data */
 /* Vector Base */
 #define CONFIG_SYS_CA9_VECTOR_BASE     SRAM_ROM_VECT_BASE
 
@@ -89,7 +89,6 @@
 #define CONFIG_SYS_NS16550_COM3                UART3_BASE
 
 #define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_OVERWRITE
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
@@ -107,8 +106,9 @@
 #define CONFIG_TWL6030_POWER           1
 
 /* MMC */
+#define CONFIG_GENERIC_MMC             1
 #define CONFIG_MMC                     1
-#define CONFIG_OMAP3_MMC               1
+#define CONFIG_OMAP_HSMMC              1
 #define CONFIG_SYS_MMC_SET_DEV         1
 #define CONFIG_DOS_PARTITION           1
 
@@ -120,11 +120,6 @@
 #define CONFIG_USB_DEVICE              1
 #define CONFIG_USB_TTY                 1
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID           0x0451
-#define CONFIG_USBD_PRODUCTID          0x5678
-#define CONFIG_USBD_MANUFACTURER       "Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME       "OMAP4 Panda"
 
 /* Flash */
 #define CONFIG_SYS_NO_FLASH    1
@@ -140,22 +135,16 @@
 
 /* Disabled commands */
 #undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
 #undef CONFIG_CMD_IMLS         /* List all found images        */
 
-/*
- * Enabling relocation of u-boot by default
- * Relocation can be skipped if u-boot is copied to the TEXT_BASE
- */
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
 /*
  * Environment setup
  */
 
 #define CONFIG_BOOTDELAY       3
 
-/* allow overwriting serial config and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -163,7 +152,7 @@
        "console=ttyS2,115200n8\0" \
        "usbtty=cdc_acm\0" \
        "vram=16M\0" \
-       "mmcdev=1\0" \
+       "mmcdev=0\0" \
        "mmcroot=/dev/mmcblk0p2 rw\0" \
        "mmcrootfstype=ext3 rootwait\0" \
        "mmcargs=setenv bootargs console=${console} " \
@@ -179,7 +168,7 @@
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc init ${mmcdev}; then " \
+       "if mmc rescan ${mmcdev}; then " \
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \
@@ -239,4 +228,11 @@
  */
 #define CONFIG_NR_DRAM_BANKS   1
 
+#define CONFIG_SYS_SDRAM_BASE          0x80000000
+#define CONFIG_SYS_INIT_RAM_ADDR       0x4030D800
+#define CONFIG_SYS_INIT_RAM_SIZE       0x800
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */