arm: mvebu: Make ECC support configurable on Armada XP

[u-boot] / include / configs / ot1200.h

diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index 9a74fddaa72898f9f5c8f68a341862c7aed48047..879ad58fc4ae87598d1228130cc97d14f81620ba 100644 (file)
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -16,10 +16,6 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 
-/* FUSE Configs */
-#define CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-
 /* UART Configs */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
@@ -27,11 +23,6 @@
 /* SF Configs */
 #define CONFIG_CMD_SF
 #define CONFIG_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_SST
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS  2
 #define CONFIG_SF_DEFAULT_CS   0
@@ -49,6 +40,8 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED            100000
 
@@ -61,16 +54,9 @@
 #define IMX_OTPWRITE_ENABLED
 
 /* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-
 /* USB Configs */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
@@ -109,7 +95,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                    ENET_BASE_ADDR
@@ -126,12 +111,10 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #endif
 
 /* Miscellaneous commands */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_SETEXPR
 
 #define CONFIG_PREBOOT                 ""
 
@@ -162,10 +145,6 @@
 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 #define CONFIG_BOOTP_SERVERIP
 #define CONFIG_BOOTP_BOOTFILE