configs: vf610: increase maximum size and enforce correct limit

[u-boot] / include / configs / pcm052.h

diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
index 2cbd8feb71d2bb12850e094b7e6ad778180add17..060928bd30d35e0a610b0caf66ec9b57cd00bdae 100644 (file)
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@@ -11,8 +11,6 @@
 
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_VF610
-
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
 /* Enable passing of ATAGs */
@@ -23,11 +21,8 @@
 
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE                        115200
 
 /* NAND support */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 #ifdef CONFIG_CMD_NAND
@@ -36,13 +31,7 @@
 
 #define CONFIG_JFFS2_NAND
 
-/* UBI */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
 /* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 
@@ -72,8 +61,6 @@
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE            RMII
 #define CONFIG_FEC_MXC_PHYADDR          0
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
 
 /* QSPI Configs*/
 
@@ -89,13 +76,11 @@
 #define CONFIG_SYS_I2C_MXC
 
 /* RTC (actually an RV-4162 but M41T62-compatible) */
-#define CONFIG_CMD_DATE
 #define CONFIG_RTC_M41T62
 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 #define CONFIG_SYS_RTC_BUS_NUM 2
 
 /* EEPROM (24FC256) */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 #define CONFIG_SYS_I2C_EEPROM_BUS 2
@@ -104,8 +89,8 @@
 #define CONFIG_LOADADDR                        0x82000000
 
 /* We boot from the gfxRAM area of the OCRAM. */
-#define CONFIG_SYS_TEXT_BASE           0x3f408000
-#define CONFIG_BOARD_SIZE_LIMIT                524288
+#define CONFIG_SYS_TEXT_BASE           0x3f401000
+#define CONFIG_BOARD_SIZE_LIMIT                520192
 
 /* if no target-specific extra environment settings were defined by the
    target, define an empty one */
@@ -218,23 +203,12 @@
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              \
-                       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START       0x80010000
 #define CONFIG_SYS_MEMTEST_END         0x87C00000
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE               (128 * 1024)    /* regular stack */
-
 /* Physical memory map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     (0x80000000)