SPDX: Convert all of our single license tags to Linux Kernel style

[u-boot] / include / configs / pengwyn.h

diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
index f1db204910d25bdbdf6f819f602e6124cce761b5..c54d50096f33f007d5799ab859a25c46d1d983e9 100644 (file)
--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -1,19 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * pengwyn.h
  *
  * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
  *
  * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_PENGWYN_H
 #define __CONFIG_PENGWYN_H
 
-#define CONFIG_NAND
 #define CONFIG_SERIAL1
-#define CONFIG_CONS_INDEX              1
 
 #include <configs/ti_am335x_common.h>
 
@@ -24,8 +21,6 @@
 /* set env size */
 #define CONFIG_ENV_SIZE                        0x4000
 
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x80200000\0" \
@@ -83,8 +78,8 @@
                "tftp ${fdtaddr} ${fdtfile}; " \
                "run netargs; " \
                "bootz ${loadaddr} - ${fdtaddr}\0" \
-       "mtdids=" MTDIDS_DEFAULT "\0" \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "nandargs=setenv bootargs console=${console} " \
                "${optargs} " \
                "root=${nandroot} " \
@@ -104,11 +99,9 @@
 
 /* NS16550 Configuration: primary UART via FTDI */
 #define CONFIG_SYS_NS16550_COM1                0x44e09000
-#define CONFIG_BAUDRATE                        115200
 
 /* I2C Configuration */
 #define        CONFIG_SYS_I2C_SPEED            100000
-#define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
@@ -116,9 +109,6 @@
 /* SPL */
 
 /* NAND support */
-#define CONFIG_CMD_NAND
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_ELM
 
 /* NAND Configuration. */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -154,26 +144,12 @@
 /* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x200000
 
-#define CONFIG_CMD_MTDPARTS
-
-#define CONFIG_CMD_DIAG /* monitor functions : Diagnostics */
-
-#define MTDIDS_DEFAULT                 "nand0=omap2-nand.0"
 /* Size must be a multiple of Nand erase size (524288 b) */
-#define MTDPARTS_DEFAULT               "mtdparts=omap2-nand.0:512k(SPL)," \
-                                       "512k(SPL.backup1)," \
-                                       "512k(SPL.backup2)," \
-                                       "512k(SPL.backup3),1536k(u-boot)," \
-                                       "512k(u-boot-spl-os)," \
-                                       "512k(u-boot-env),5m(kernel),-(rootfs)"
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              0x260000 /* environment starts here */
 #define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS                0x240000 /* un-assigned */
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x280000
-#define CONFIG_CMD_SPL_WRITE_SIZE      0x2000
 #endif
 
 /*
@@ -182,31 +158,15 @@
  * board schematic and physical port wired to each.  Then for host we
  * add mass storage support.
  */
-#define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
-#define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE        MUSB_PERIPHERAL
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 
-#if defined(CONFIG_SPL_BUILD)
-/* disable host part of MUSB in SPL */
-/* Disable CPSW SPL support so we fit within the 101KiB limit. */
-#endif
-
-/* CPSW ethernet */
-#define CONFIG_NET_MULTI
-
 /* Network */
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET       1
 #define CONFIG_PHY_NATSEMI
 #define CONFIG_PHY_REALTEK
 
-/* CPSW support */
-
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
-
 #endif /* ! __CONFIG_PENGWYN_H */