ARM: Drop unreferenced CONFIG_* defines named after boards

[u-boot] / include / configs / pm9g45.h

diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 0e944d871ff42cdf02b7b21b5fdda3fdc150b100..5612f5f358ebe128b4edd65d31608d18e3affe78 100644 (file)
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -22,16 +22,13 @@
  */
 #include <asm/hardware.h>
 
-#define CONFIG_PM9G45          1       /* It's an Ronetix PM9G45 */
 #define CONFIG_SYS_AT91_CPU_NAME       "AT91SAM9G45"
 
-#define MACH_TYPE_PM9G45       2672
 #define CONFIG_MACH_TYPE       MACH_TYPE_PM9G45
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     12000000 /* from 12 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
-#define CONFIG_SYS_TEXT_BASE           0x73f00000
 
 #define CONFIG_ARCH_CPU_INIT
 
@@ -40,7 +37,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers
@@ -62,16 +58,7 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE      1
-#define CONFIG_BOOTP_BOOTPATH          1
-#define CONFIG_BOOTP_GATEWAY           1
-#define CONFIG_BOOTP_HOSTNAME          1
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_NAND                1
-
-#define CONFIG_CMD_JFFS2               1
 #define CONFIG_JFFS2_CMDLINE           1
 #define CONFIG_JFFS2_NAND              1
 #define CONFIG_JFFS2_DEV               "nand0" /* NAND dev jffs2 lives on */
@@ -83,9 +70,6 @@
 #define PHYS_SDRAM                     0x70000000
 #define PHYS_SDRAM_SIZE                        0x08000000      /* 128 megs */
 
-/* NOR flash, not available */
-#define CONFIG_SYS_NO_FLASH            1
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
@@ -111,12 +95,10 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 #define CONFIG_USB_OHCI_NEW            1
-#define CONFIG_DOS_PARTITION           1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT   1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE  0x00700000 /* _UHP_OHCI_BASE */
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME  "at91sam9g45"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE             1
 
 /* board specific(not enough SRAM) */
 #define CONFIG_AT91SAM9G45_LCD_BASE    PHYS_SDRAM + 0xE00000
@@ -127,28 +109,10 @@
 #define CONFIG_SYS_MEMTEST_END         CONFIG_AT91SAM9G45_LCD_BASE
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND          1
 #define CONFIG_ENV_OFFSET              0x60000
 #define CONFIG_ENV_OFFSET_REDUND       0x80000
 #define CONFIG_ENV_SIZE                        0x20000         /* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND     "nand read 0x72000000 0x200000 0x200000; bootm"
-#define CONFIG_BOOTARGS                "fbcon=rotate:3 console=tty0 " \
-                               "console=ttyS0,115200 " \
-                               "root=/dev/mtdblock4 " \
-                               "mtdparts=atmel_nand:128k(bootstrap)ro," \
-                               "256k(uboot)ro,1664k(env)," \
-                               "2M(linux)ro,-(root) rw " \
-                               "rootfstype=jffs2"
-
-#define CONFIG_BAUDRATE                        115200
-
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP            1
-#define CONFIG_CMDLINE_EDITING         1
-#define CONFIG_AUTO_COMPLETE
 
 /*
  * Size of malloc() pool