cfi_flash: Use __func__ macro instead of function name

[u-boot] / include / configs / rk3288_common.h

diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index e7a8f724f16e2d655fcb51bf6f9fead64a10da58..c2bd378437eb701655009e2ff73e4e1bf510486f 100644 (file)
--- a/include/configs/rk3288_common.h
+++ b/include/configs/rk3288_common.h
@@ -12,8 +12,6 @@
 
 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 #define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_MALLOC_LEN          (32 << 20)
 #define CONFIG_SYS_CBSIZE              1024
 
@@ -23,9 +21,8 @@
 
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SYS_NS16550_MEM32
-#define CONFIG_SPL_BOARD_INIT
 
-#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+#ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM
 /* Bootrom will load u-boot binary to 0x0 once return from SPL */
 #define CONFIG_SYS_TEXT_BASE           0x00000000
 #else
@@ -34,13 +31,15 @@
 #define CONFIG_SYS_INIT_SP_ADDR                0x00100000
 #define CONFIG_SYS_LOAD_ADDR           0x00800800
 #define CONFIG_SPL_STACK               0xff718000
-#define CONFIG_SPL_TEXT_BASE           0xff704004
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
+# define CONFIG_SPL_TEXT_BASE          0x0
+#else
+# define CONFIG_SPL_TEXT_BASE          0xff704000
+#endif
 
 /* MMC/SD IP block */
 #define CONFIG_BOUNCE_BUFFER
 
-#define CONFIG_FAT_WRITE
-
 /* RAW SD card / eMMC locations. */
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (128 << 10)
 
@@ -51,6 +50,7 @@
 #define CONFIG_SYS_SDRAM_BASE          0
 #define CONFIG_NR_DRAM_BANKS           1
 #define SDRAM_BANK_SIZE                        (2UL << 30)
+#define SDRAM_MAX_SIZE                 0xfe000000
 
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI
@@ -58,36 +58,12 @@
 
 #ifndef CONFIG_SPL_BUILD
 /* usb otg */
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_DWC2_OTG
-#define CONFIG_ROCKCHIP_USB2_PHY
-#define CONFIG_USB_GADGET_VBUS_DRAW    0
-
-/* fastboot  */
-#define CONFIG_CMD_FASTBOOT
-#define CONFIG_USB_FUNCTION_FASTBOOT
-#define CONFIG_FASTBOOT_FLASH
-#define CONFIG_FASTBOOT_FLASH_MMC_DEV  1       /* eMMC */
-#define CONFIG_FASTBOOT_BUF_ADDR       CONFIG_SYS_LOAD_ADDR
-#define CONFIG_FASTBOOT_BUF_SIZE       0x08000000
 
 /* usb mass storage */
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_CMD_USB_MASS_STORAGE
 
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_G_DNL_MANUFACTURER      "Rockchip"
-#define CONFIG_G_DNL_VENDOR_NUM                0x2207
-#define CONFIG_G_DNL_PRODUCT_NUM       0x320a
-
 /* usb host support */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_ASIX
-#endif
 #define ENV_MEM_LAYOUT_SETTINGS \
        "scriptaddr=0x00000000\0" \
        "pxefile_addr_r=0x00100000\0" \