ARM: uniphier: change load addresses for bigger kernel image

[u-boot] / include / configs / salvator-x.h

diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h
index 81a7226d62d8753ab5df0077db4685062acb2423..33624e6c4ea08bf5cc2b651beb7d72070960d8aa 100644 (file)
--- a/include/configs/salvator-x.h
+++ b/include/configs/salvator-x.h
@@ -12,42 +12,22 @@
 
 #undef DEBUG
 
-#define CONFIG_RCAR_BOARD_STRING "Salvator-X"
-
 #include "rcar-gen3-common.h"
 
-/* SCIF */
-#define CONFIG_SCIF_CONSOLE
-#define CONFIG_CONS_SCIF2
-#define CONFIG_CONS_INDEX      2
-#define CONFIG_SH_SCIF_CLK_FREQ        CONFIG_SYS_CLK_FREQ
-
-/* [A] Hyper Flash */
-/* use to RPC(SPI Multi I/O Bus Controller) */
-#define CONFIG_ENV_IS_NOWHERE
+/* Ethernet RAVB */
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
 
 /* Board Clock */
 /* XTAL_CLK : 33.33MHz */
-#define RCAR_XTAL_CLK          33333333u
-#define CONFIG_SYS_CLK_FREQ    RCAR_XTAL_CLK
-/* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */
-/* CPclk 16.66MHz, S3D2 133.33MHz                          */
-#define CONFIG_CP_CLK_FREQ     (CONFIG_SYS_CLK_FREQ / 2)
-#define CONFIG_PLL1_CLK_FREQ   (CONFIG_SYS_CLK_FREQ * 192 / 2)
-#define CONFIG_S3D2_CLK_FREQ   (266666666u/2)
+#define CONFIG_SYS_CLK_FREQ    33333333u
 
 /* Generic Timer Definitions (use in assembler source) */
 #define COUNTER_FREQUENCY      0xFE502A        /* 16.66MHz from CPclk */
 
-/* Generic Interrupt Controller Definitions */
-#define CONFIG_GICV2
-#define GICD_BASE      0xF1010000
-#define GICC_BASE      0xF1020000
-
-/* Module stop status bits */
-/* MFIS, SCIF1 */
-#define CONFIG_SMSTP2_ENA      0x00002040
-/* INTC-AP, IRQC */
-#define CONFIG_SMSTP4_ENA      0x00000180
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_OFFSET              (-CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV         1
+#define CONFIG_SYS_MMC_ENV_PART                2
 
 #endif /* __SALVATOR_X_H */