rockchip: add basic support for evb-rk3288 board

[u-boot] / include / configs / sbc8349.h

diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 6f912ed2c3afdc27c1f32e642f946b5bd041fb74..567c4d588b43c1bfcaa3a661b484e139dc51f1ad 100644 (file)
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -5,7 +5,7 @@
  * Paul Gortmaker <paul.gortmaker@windriver.com>
  * Based on the MPC8349EMDS config.
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -15,11 +15,12 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 /*
  * High Level Configuration Options
  */
 #define CONFIG_E300            1       /* E300 Family */
-#define CONFIG_MPC83xx         1       /* MPC83xx family */
 #define CONFIG_MPC834x         1       /* MPC834x family */
 #define CONFIG_MPC8349         1       /* MPC8349 specific */
 #define CONFIG_SBC8349         1       /* WRS SBC8349 board specific */
@@ -266,7 +267,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX     1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -279,13 +279,6 @@
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -402,7 +395,6 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
-
 /*
  * BOOTP options
  */
@@ -411,26 +403,14 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
-
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 /*
@@ -438,7 +418,6 @@
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
        #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
@@ -451,7 +430,6 @@
 #define CONFIG_SYS_MAXARGS     16      /* max number of command args */
                                /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -541,7 +519,6 @@
        HID0_ENABLE_M_BIT |\
        HID0_ENABLE_ADDRESS_BROADCAST) */
 
-
 #define CONFIG_SYS_HID2 HID2_HBE
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
@@ -645,7 +622,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*
@@ -665,7 +641,6 @@
                                /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                800000
 
-#define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE         115200