Convert MPC8641HPCN to use libfdt.

[u-boot] / include / configs / sc520_cdp.h

diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index d7d07a62fc96530bedf50e4f911a4b3b83e554c7..8491d97ae421607a70736e694d5f7ff876be6f44 100644 (file)
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -64,24 +64,37 @@
  */
 #define CONFIG_MALLOC_SIZE     (CFG_ENV_SIZE + 128*1024)
 
-
 #define CONFIG_BAUDRATE                9600
 
-#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_EEPROM)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_EEPROM
 
 #define CONFIG_BOOTDELAY       15
 #define CONFIG_BOOTARGS        "root=/dev/mtdblock0 console=ttyS0,9600"
 /* #define CONFIG_BOOTCOMMAND  "bootm 38000000" */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */
 #endif
 
-
 /*
  * Miscellaneous configurable options
  */
@@ -104,7 +117,6 @@
                                                /* valid baudrates */
 #define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200 }
 
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
@@ -113,8 +125,6 @@
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-
-
 #define CFG_MAX_FLASH_BANKS    3       /* max number of memory banks           */
 #define CFG_MAX_FLASH_SECT     64      /* max number of sectors on one chip    */
 
@@ -125,11 +135,9 @@
 #define CONFIG_SPI_EEPROM      /* Support for SPI EEPROMs (AT25128) */
 #define CONFIG_MW_EEPROM       /* Support for MicroWire EEPROMs (AT93LC46) */
 
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
-
 /* Environment in EEPROM */
 #define CFG_ENV_IS_IN_EEPROM   1
 #define CONFIG_SPI
@@ -181,6 +189,15 @@
 #undef  CONFIG_IDE_RESET               /* reset for ide unsupported... */
 #undef  CONFIG_IDE_RESET_ROUTINE       /* no special reset function */
 
+/************************************************************
+*SATA/Native Stuff
+************************************************************/
+#define CFG_SATA_SUPPORTED      1
+#define CFG_SATA_MAXBUS         2       /*Max Sata buses supported */
+#define CFG_SATA_DEVS_PER_BUS   2      /*Max no. of devices per bus/port */
+#define CFG_SATA_MAXDEVICES     (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS)
+#define CFG_ATA_PIIX            1       /*Supports ata_piix driver */
+
 /************************************************************
  * ATAPI support (experimental)
  ************************************************************/
@@ -200,7 +217,6 @@
 #define CONFIG_I8042_KBD
 #define CFG_ISA_IO 0
 
-
 /************************************************************
  * RTC
  ***********************************************************/