Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xx

[u-boot] / include / configs / scb9328.h

diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index 6cd91269d4311fc9a550037f9c7baa32db5074fb..4ae25adde04c139017ad199e28fcb0ad72e87d2b 100644 (file)
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -36,20 +36,27 @@
 
 
 /*
- * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
- * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
- * functionality or size of u-boot code.
+ * BOOTP options
  */
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL         \
-                               & ~CFG_CMD_LOADS        \
-                               & ~CFG_CMD_CONSOLE      \
-                               & ~CFG_CMD_AUTOSCRIPT   \
-                               | CFG_CMD_NET           \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_DHCP          \
-                               )
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_AUTOSCRIPT
 
-#include <cmd_confdefs.h>
 
 /*
  * Boot options. Setting delay to -1 stops autostart count down.
@@ -119,7 +126,6 @@
 
 #define PRECHARGE_CMD 0x910a8200
 #define AUTOREFRESH_CMD 0xa10a8200
-#define CONFIG_INIT_CRITICAL
 
 /*
  * SDRAM Memory Map
@@ -183,7 +189,7 @@
  * Right now there is no gain for user, but later on booting kernel might be
  * possible. Consider using XIP kernel running from flash to save RAM
  * footprint.
- * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
  */
 #define CFG_JFFS2_FIRST_BANK           0
 #define CFG_JFFS2_FIRST_SECTOR         5
@@ -250,14 +256,10 @@
 #define CFG_CS5U_VAL 0x00008400
 #define CFG_CS5L_VAL 0x00000D03
 
-#define CONFIG_DRIVER_DM9000           1
 #define CONFIG_DRIVER_DM9000           1
 #define CONFIG_DM9000_BASE             0x16000000
 #define DM9000_IO                      CONFIG_DM9000_BASE
 #define DM9000_DATA                    (CONFIG_DM9000_BASE+4)
-/* #define CONFIG_DM9000_USE_8BIT */
-#define CONFIG_DM9000_USE_16BIT
-/* #define CONFIG_DM9000_USE_32BIT */
 
 /* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
    f_ref=16,777MHz