Merge git://git.denx.de/u-boot-socfpga

[u-boot] / include / configs / socfpga_sr1500.h

diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h
index 0407f03969f373e6c7fa5c9ef719d1b92e9d13ed..8879817b3020ed503eac0f5ab4ee6d2d178b9524 100644 (file)
--- a/include/configs/socfpga_sr1500.h
+++ b/include/configs/socfpga_sr1500.h
@@ -8,21 +8,10 @@
 
 #include <asm/arch/base_addr_ac5.h>
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
-
-#define CONFIG_HW_WATCHDOG
-
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE              0x40000000      /* 1GiB on SR1500 */
 
 /* Booting Linux */
-#define CONFIG_BOOTFILE                "uImage"
-#define CONFIG_BOOTARGS                "console=ttyS0," __stringify(CONFIG_BAUDRATE)
-#define CONFIG_BOOTCOMMAND     "run mmcload; run mmcboot"
 #define CONFIG_LOADADDR                0x01000000
 #define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR
 
@@ -32,33 +21,7 @@
 #define CONFIG_PHY_MARVELL
 #define PHY_ANEG_TIMEOUT       8000
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       "verify=n\0" \
-       "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-       "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
-               "bootm ${loadaddr} - ${fdt_addr}\0" \
-       "bootimage=zImage\0" \
-       "fdt_addr=100\0" \
-       "fdtimage=socfpga.dtb\0" \
-               "fsloadcmd=ext2load\0" \
-       "bootm ${loadaddr} - ${fdt_addr}\0" \
-       "mmcroot=/dev/mmcblk0p2\0" \
-       "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
-               " root=${mmcroot} rw rootwait;" \
-               "bootz ${loadaddr} - ${fdt_addr}\0" \
-       "mmcload=mmc rescan;" \
-               "load mmc 0:1 ${loadaddr} ${bootimage};" \
-               "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-       "qspiload=sf probe && mtdparts default && run ubiload\0" \
-       "qspiboot=setenv bootargs " CONFIG_BOOTARGS \
-               " ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
-               "bootz ${loadaddr} - ${fdt_addr}\0" \
-       "ubiload=ubi part UBI && ubifsmount ubi0 && " \
-               "ubifsload ${loadaddr} /boot/${bootimage} && " \
-               "ubifsload ${fdt_addr} /boot/${fdtimage}\0"
-
 /* Environment */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 
 /* Enable SPI NOR flash reset, needed for SPI booting */
 #define CONFIG_SPI_N25Q256A_RESET
@@ -66,7 +29,6 @@
 /*
  * Bootcounter
  */
-#define CONFIG_BOOTCOUNT_LIMIT
 /* last 2 lwords in OCRAM */
 #define CONFIG_SYS_BOOTCOUNT_ADDR      0xfffffff8
 #define CONFIG_SYS_BOOTCOUNT_BE