usb: dwc3: Add DWC3 controller driver support

[u-boot] / include / configs / stv0991.h

diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index a316f63528b5fb4d71350ccd9b0d76dd208b5245..887f31a84d1c799762c1f169e90b6c261ce8ccc3 100644 (file)
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -8,7 +8,6 @@
 #ifndef __CONFIG_STV0991_H
 #define __CONFIG_STV0991_H
 #define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
 #define CONFIG_BOARD_EARLY_INIT_F
 
@@ -24,29 +23,27 @@
 #define PHYS_SDRAM_1_SIZE                      0x00198000
 
 #define CONFIG_ENV_SIZE                                0x10000
-#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SECT_SIZE                   CONFIG_ENV_SIZE
+#define CONFIG_ENV_OFFSET                      0x30000
 #define CONFIG_ENV_ADDR                                \
        (PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
 #define CONFIG_SYS_MAXARGS                     16
 #define CONFIG_SYS_MALLOC_LEN                  (CONFIG_ENV_SIZE + 16 * 1024)
 
 /* serial port (PL011) configuration */
-#define CONFIG_SYS_SERIAL0                     0x80406000
-#define CONFIG_PL011_SERIAL
-#define CONFIG_CONS_INDEX                      0
 #define CONFIG_BAUDRATE                                115200
-#define CONFIG_PL01x_PORTS                     {(void *)CONFIG_SYS_SERIAL0}
-#define CONFIG_PL011_CLOCK                     (2700 * 1000)
+#define CONFIG_PL01X_SERIAL
 
 /* user interface */
 #define CONFIG_SYS_PROMPT                      "STV0991> "
-#define CONFIG_SYS_CBSIZE                      256/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE                      1024
 #define CONFIG_SYS_PBSIZE                      (CONFIG_SYS_CBSIZE \
                                                +sizeof(CONFIG_SYS_PROMPT) + 16)
 
 /* MISC */
 #define CONFIG_SYS_LOAD_ADDR                   0x00000000
-#define CONFIG_SYS_INIT_RAM_SIZE               0x2000
+#define CONFIG_SYS_INIT_RAM_SIZE               0x8000
 #define CONFIG_SYS_INIT_RAM_ADDR               0x00190000
 #define CONFIG_SYS_INIT_SP_OFFSET              \
        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
@@ -59,8 +56,6 @@
 
 #define CONFIG_MII
 #define CONFIG_PHYLIB
-#define CONFIG_CMD_NET
-#define CONFIG_DESIGNWARE_ETH
 #define CONFIG_DW_ALTDESCRIPTOR
 #define CONFIG_PHY_MICREL
 
@@ -68,4 +63,31 @@
 #define CONFIG_CMD_PING
 #define CONFIG_PHY_RESET_DELAY                 10000           /* in usec */
 
+#define CONFIG_SYS_MEMTEST_START               0x0000
+#define CONFIG_SYS_MEMTEST_END                 1024*1024
+#define CONFIG_CMD_MEMTEST
+
+/* Misc configuration */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_BOOTDELAY                       3
+#define CONFIG_BOOTCOMMAND                     "go 0x40040000"
+
+#define CONFIG_OF_LIBFDT
+
+/*
++ * QSPI support
++ */
+#ifdef CONFIG_OF_CONTROL               /* QSPI is controlled via DT */
+#define CONFIG_CADENCE_QSPI
+#define CONFIG_CQSPI_DECODER           0
+#define CONFIG_CQSPI_REF_CLK           ((30/4)/2)*1000*1000
+#define CONFIG_CMD_SPI
+
+#define CONFIG_SPI_FLASH_STMICRO       /* Micron/Numonyx flash */
+#define CONFIG_SPI_FLASH_WINBOND       /* WINBOND */
+#define CONFIG_CMD_SF
+#endif
+
 #endif /* __CONFIG_H */