#ifndef _SUNXI_COMMON_CONFIG_H
#define _SUNXI_COMMON_CONFIG_H
+#include <asm/arch/cpu.h>
#include <linux/stringify.h>
#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
#define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */
#endif
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM_SERIAL)
-# define CONFIG_DW_SERIAL
-#endif
-
-/*
- * Display CPU information
- */
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_SYS_PROMPT "sunxi# "
-
/* Serial & console */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
/* ns16550 reg in the low bits of cpu reg */
#define CONFIG_SYS_NS16550_CLK 24000000
-#ifndef CONFIG_DM_SERIAL
+#ifdef CONFIG_DM_SERIAL
+# define CONFIG_DW_SERIAL
+#else
# define CONFIG_SYS_NS16550_REG_SIZE -4
# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
#endif
/* CPU */
+#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_CACHELINE_SIZE 64
/*
#define CONFIG_INITRD_TAG
#define CONFIG_SERIAL_TAG
+#ifdef CONFIG_NAND_SUNXI
+#define CONFIG_SPL_NAND_SUPPORT 1
+#endif
+
/* mmc config */
#if !defined(CONFIG_UART0_PORT_F)
#define CONFIG_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */
#endif
-/* 4MB of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
+/* 64MB of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20))
/*
* Miscellaneous configurable options
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* 512 KiB */
+#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */
#define CONFIG_IDENT_STRING " Allwinner Technology"
#define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */
#define CONFIG_CONS_INDEX 1 /* UART0 */
#endif
+#ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
#if CONFIG_CONS_INDEX == 1
#ifdef CONFIG_MACH_SUN9I
#define OF_STDOUT_PATH "/soc/serial@07000000:115200"
#else
#error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
#endif
+#endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
/* GPIO */
#define CONFIG_SUNXI_GPIO
* The amount of RAM to keep free at the top of RAM when relocating u-boot,
* to use as framebuffer. This must be a multiple of 4096.
*/
-#define CONFIG_SUNXI_MAX_FB_SIZE (9 << 20)
+#define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
/* Do we want to initialize a simple FB? */
#define CONFIG_VIDEO_DT_SIMPLEFB
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_STD_TIMINGS
#define CONFIG_I2C_EDID
+#define VIDEO_LINE_LEN (pGD->plnSizeX)
/* allow both serial and cfb console. */
#define CONFIG_CONSOLE_MUX
#define CONFIG_USB_MUSB_PIO_ONLY
#endif
+#ifdef CONFIG_USB_MUSB_GADGET
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 0
+
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#endif
+
+#ifdef CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_G_DNL_VENDOR_NUM 0x1f3a
+#define CONFIG_G_DNL_PRODUCT_NUM 0x1010
+#define CONFIG_G_DNL_MANUFACTURER "Allwinner Technology"
+#endif
+
+#ifdef CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
+
+#define CONFIG_FASTBOOT_FLASH
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
+#define CONFIG_EFI_PARTITION
+#endif
+
+#ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_CMD_USB_MASS_STORAGE
+#endif
+
#ifdef CONFIG_USB_KEYBOARD
#define CONFIG_CONSOLE_MUX
#define CONFIG_PREBOOT
#define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */
/*
- * 240M RAM (256M minimum minus space for the framebuffer),
+ * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
* 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
* 1M script, 1M pxe and the ramdisk at the end.
*/
#define MEM_LAYOUT_ENV_SETTINGS \
- "bootm_size=0xf000000\0" \
+ "bootm_size=0xa000000\0" \
"kernel_addr_r=" __stringify(SDRAM_OFFSET(2000000)) "\0" \
"fdt_addr_r=" __stringify(SDRAM_OFFSET(3000000)) "\0" \
"scriptaddr=" __stringify(SDRAM_OFFSET(3100000)) "\0" \
#define BOOT_TARGET_DEVICES_USB(func)
#endif
+/* FEL boot support, auto-execute boot.scr if a script address was provided */
+#define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
+ "bootcmd_fel=" \
+ "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
+ "echo '(FEL boot)'; " \
+ "source ${fel_scriptaddr}; " \
+ "fi\0"
+#define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
+ "fel "
+
#define BOOT_TARGET_DEVICES(func) \
+ func(FEL, fel, na) \
BOOT_TARGET_DEVICES_MMC(func) \
BOOT_TARGET_DEVICES_SCSI(func) \
BOOT_TARGET_DEVICES_USB(func) \