#else
-#ifdef CONFIG_CMD_EXT2
-#define BOOT_FSTYPE_EXT2 "ext2 "
-#else
-#define BOOT_FSTYPE_EXT2 ""
-#endif
-
-#ifdef CONFIG_CMD_FAT
-#define BOOT_FSTYPE_FAT "fat"
-#else
-#define BOOT_FSTYPE_FAT ""
-#endif
-
#ifdef CONFIG_CMD_MMC
#define BOOTCMDS_MMC \
"mmc_boot=" \
#endif
#define BOOTCMDS_COMMON \
- "scriptaddr=0x400000\0" \
- \
"rootpart=1\0" \
\
"script_boot=" \
- "if ${fs}load ${devtype} ${devnum}:${rootpart} " \
+ "if load ${devtype} ${devnum}:${rootpart} " \
"${scriptaddr} ${prefix}${script}; then " \
"echo ${script} found! Executing ...;" \
"source ${scriptaddr};" \
\
"scan_boot=" \
"echo Scanning ${devtype} ${devnum}...; " \
- "for fs in ${boot_fstypes}; do " \
- "for prefix in ${boot_prefixes}; do " \
- "for script in ${boot_scripts}; do " \
- "run script_boot; " \
- "done; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "for script in ${boot_scripts}; do " \
+ "run script_boot; " \
"done; " \
"done;\0" \
\
BOOT_TARGETS_DHCP " " \
"\0" \
\
- "boot_fstypes=" \
- BOOT_FSTYPE_EXT2 " " \
- BOOT_FSTYPE_FAT " " \
- "\0" \
- \
"boot_prefixes=/ /boot/\0" \
\
"boot_scripts=boot.scr.uimg boot.scr\0" \
#endif
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ * else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ * should not overlap that area, or the kernel will have to copy itself
+ * somewhere else before decompression. Similarly, the address of any other
+ * data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ * this up to 16M allows for a sizable kernel to be decompressed below the
+ * compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ * the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ * for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "scriptaddr=0x10000000\0" \
+ "kernel_addr_r=0x01000000\0" \
+ "fdt_addr_r=0x02000000\0" \
+ "ramdisk_addr_r=0x02100000\0" \
+
+#ifdef CONFIG_TEGRA_KEYBOARD
+#define STDIN_KBD_KBC ",tegra-kbc"
+#else
+#define STDIN_KBD_KBC ""
+#endif
+
+#ifdef CONFIG_USB_KEYBOARD
+#define STDIN_KBD_USB ",usbkbd"
+#define CONFIG_SYS_USB_EVENT_POLL
+#define CONFIG_PREBOOT "usb start"
+#else
+#define STDIN_KBD_USB ""
+#endif
+
+#define TEGRA_DEVICE_SETTINGS \
+ "stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \
+ "stdout=serial,lcd\0" \
+ "stderr=serial,lcd\0" \
+
#define CONFIG_EXTRA_ENV_SETTINGS \
TEGRA_DEVICE_SETTINGS \
- "fdt_load=0x01000000\0" \
- "fdt_high=01100000\0" \
+ MEM_LAYOUT_ENV_SETTINGS \
BOOTCMDS_COMMON
/* overrides for SPL build here */
#undef CONFIG_OF_CONTROL
#endif
-/* remove SERIAL_MULTI */
-#ifdef CONFIG_SERIAL_MULTI
-#undef CONFIG_SERIAL_MULTI
-#endif
-
/* remove I2C support */
#ifdef CONFIG_TEGRA_I2C
#undef CONFIG_TEGRA_I2C
#ifdef CONFIG_EFI_PARTITION
#undef CONFIG_EFI_PARTITION
#endif
+#ifdef CONFIG_CMD_FS_GENERIC
+#undef CONFIG_CMD_FS_GENERIC
+#endif
+#ifdef CONFIG_CMD_EXT4
+#undef CONFIG_CMD_EXT4
+#endif
#ifdef CONFIG_CMD_EXT2
#undef CONFIG_CMD_EXT2
#endif
#ifdef CONFIG_CMD_FAT
#undef CONFIG_CMD_FAT
#endif
+#ifdef CONFIG_FS_EXT4
+#undef CONFIG_FS_EXT4
+#endif
+#ifdef CONFIG_FS_FAT
+#undef CONFIG_FS_FAT
+#endif
/* remove USB */
#ifdef CONFIG_USB_EHCI
#undef CONFIG_CMD_USB
#endif
+/* remove part command support */
+#ifdef CONFIG_PARTITION_UUIDS
+#undef CONFIG_PARTITION_UUIDS
+#endif
+
+#ifdef CONFIG_CMD_PART
+#undef CONFIG_CMD_PART
+#endif
+
#endif /* CONFIG_SPL_BUILD */
#endif /* __TEGRA_COMMON_POST_H */