* Add support for USB Mass Storage Devices (BBB)

[u-boot] / include / configs / trab.h

diff --git a/include/configs/trab.h b/include/configs/trab.h
index 4c33bdb43c90e52f108e4779cd79d6d7f85ae174..d96241a2be462fc37cb8364c38bb8bf818a3376b 100644 (file)
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2002
+ * (C) Copyright 2002-2003
  * Gary Jennejohn <gj@denx.de>
  *
  * Configuation settings for the TRAB board.
@@ -40,6 +40,7 @@
 #define CONFIG_S3C2400         1       /* in a SAMSUNG S3C2400 SoC     */
 #define CONFIG_TRAB            1       /* on a TRAB Board              */
 #undef CONFIG_TRAB_50MHZ               /* run the CPU at 50 MHz        */
+#define LITTLEENDIAN           1       /* used by usb_ohci.c           */
 
 /* input clock of PLL */
 #define CONFIG_SYS_CLK_FREQ    12000000 /* TRAB has 12 MHz input clock */
@@ -67,6 +68,11 @@
 #define CFG_EEPROM_PAGE_WRITE_BITS 3   /* 8 bytes page write mode on 24C04 */
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 
+/* USB stuff */
+#define CONFIG_USB_OHCI                1
+#define CONFIG_USB_STORAGE     1
+#define CONFIG_DOS_PARTITION   1
+
 /*
  * Size of malloc() pool
  */
@@ -139,6 +145,8 @@
                                 CONFIG_COMMANDS_ADD_HWFLOW     | \
                                 CONFIG_COMMANDS_ADD_VFD        | \
                                 CONFIG_COMMANDS_ADD_EEPROM     | \
+                                CFG_CMD_USB                    | \
+                                CFG_CMD_FAT                    | \
                                 CONFIG_COMMANDS_I2C            )
 #else
 #define CONFIG_COMMANDS                (CONFIG_CMD_DFL                 | \
@@ -147,9 +155,14 @@
                                 CONFIG_COMMANDS_ADD_HWFLOW     | \
                                 CONFIG_COMMANDS_ADD_VFD        | \
                                 CONFIG_COMMANDS_ADD_EEPROM     | \
+                                CFG_CMD_USB                    | \
+                                CFG_CMD_FAT                    | \
                                 CONFIG_COMMANDS_I2C            )
 #endif
 
+/* moved up */
+#define CFG_HUSH_PARSER                1       /* use "hush" command parser    */
+
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
@@ -164,6 +177,28 @@
 #define CONFIG_BOOTCOMMAND     "run flash_nfs"
 
 #ifndef CONFIG_BIG_FLASH
+#ifdef CFG_HUSH_PARSER
+#define        CONFIG_EXTRA_ENV_SETTINGS       \
+       "nfs_args=setenv bootargs root=/dev/nfs rw " \
+               "nfsroot=$serverip:$rootpath\0" \
+       "rootpath=/opt/eldk/arm_920TDI\0" \
+       "ram_args=setenv bootargs root=/dev/ram rw\0" \
+       "add_net=setenv bootargs $bootargs ethaddr=$ethaddr " \
+               "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
+       "add_misc=setenv bootargs $bootargs console=ttyS0 panic=1\0" \
+       "load=tftp 0xC100000 /tftpboot/TRAB/u-boot.bin\0" \
+       "update=protect off 1:0-8;era 1:0-8;cp.b 0xc100000 0 $filesize;" \
+               "setenv filesize;saveenv\0" \
+       "loadfile=/tftpboot/TRAB/uImage\0" \
+       "loadaddr=c400000\0" \
+       "net_load=tftpboot $loadaddr $loadfile\0" \
+       "net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
+       "kernel_addr=00040000\0" \
+       "flash_nfs=run nfs_args add_net add_misc;bootm $kernel_addr\0" \
+       "mdm_init1=ATZ\0" \
+       "mdm_init2=ATS0=1\0" \
+       "mdm_flow_control=rts/cts\0"
+#else /* !CFG_HUSH_PARSER */
 #define        CONFIG_EXTRA_ENV_SETTINGS       \
        "nfs_args=setenv bootargs root=/dev/nfs rw " \
                "nfsroot=$(serverip):$(rootpath)\0" \
@@ -184,7 +219,29 @@
        "mdm_init1=ATZ\0" \
        "mdm_init2=ATS0=1\0" \
        "mdm_flow_control=rts/cts\0"
+#endif /* CFG_HUSH_PARSER */
 #else  /* CONFIG_BIG_FLASH */
+#ifdef CFG_HUSH_PARSER
+#define        CONFIG_EXTRA_ENV_SETTINGS       \
+       "nfs_args=setenv bootargs root=/dev/nfs rw " \
+               "nfsroot=$serverip:$rootpath\0" \
+       "rootpath=/opt/eldk/arm_920TDI\0" \
+       "ram_args=setenv bootargs root=/dev/ram rw\0" \
+       "add_net=setenv bootargs $bootargs ethaddr=$ethaddr " \
+               "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
+       "add_misc=setenv bootargs $bootargs console=ttyS0 panic=1\0" \
+       "load=tftp 0xC100000 /tftpboot/TRAB/u-boot.bin\0" \
+       "update=protect off 1:0;era 1:0;cp.b 0xc100000 0 $filesize\0" \
+       "loadfile=/tftpboot/TRAB/uImage\0" \
+       "loadaddr=c400000\0" \
+       "net_load=tftpboot $loadaddr $loadfile\0" \
+       "net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
+       "kernel_addr=00040000\0" \
+       "flash_nfs=run nfs_args add_net add_misc;bootm $kernel_addr\0" \
+       "mdm_init1=ATZ\0" \
+       "mdm_init2=ATS0=1\0" \
+       "mdm_flow_control=rts/cts\0"
+#else /* !CFG_HUSH_PARSER */
 #define        CONFIG_EXTRA_ENV_SETTINGS       \
        "nfs_args=setenv bootargs root=/dev/nfs rw " \
                "nfsroot=$(serverip):$(rootpath)\0" \
@@ -204,6 +261,7 @@
        "mdm_init1=ATZ\0" \
        "mdm_init2=ATS0=1\0" \
        "mdm_flow_control=rts/cts\0"
+#endif /* CFG_HUSH_PARSER */
 #endif /* CONFIG_BIG_FLASH */
 
 #if 0  /* disabled for development */
@@ -223,7 +281,6 @@
  */
 #define        CFG_LONGHELP                            /* undef to save memory         */
 #define        CFG_PROMPT              "TRAB # "       /* Monitor Command Prompt       */
-/* #define CFG_HUSH_PARSER             1 */    /* use "hush" command parser    */
 #ifdef CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2    "> "
 #endif