SPDX: Convert all of our single license tags to Linux Kernel style

[u-boot] / include / configs / ts4800.h

diff --git a/include/configs/ts4800.h b/include/configs/ts4800.h
index 8f3963a547d11a14081b1c2589b2208c7fddd9bd..97019c4251df8551b1df698df21029c83eb7f99c 100644 (file)
--- a/include/configs/ts4800.h
+++ b/include/configs/ts4800.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015, Savoir-faire Linux Inc.
  *
@@ -6,20 +7,13 @@
  *   Freescale Semiconductor, Inc.
  *
  * Configuration settings for the TS4800 Board
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 /* High Level Configuration Options */
-#define CONFIG_MX51
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
 
-#define CONFIG_SYS_NO_FLASH            /* No NOR Flash */
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is a 2nd stage bootloader */
 
 #define CONFIG_HW_WATCHDOG
@@ -27,7 +21,6 @@
 #define CONFIG_MACH_TYPE       MACH_TYPE_TS48XX
 
 /* text base address used when linking */
-#define CONFIG_SYS_TEXT_BASE   0x90008000
 
 #include <asm/arch/imx-regs.h>
 
@@ -48,33 +41,21 @@
 
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE   UART1_BASE
-#define CONFIG_MXC_GPIO
 
 /*
  * SPI Configs
  * */
 #define CONFIG_HARD_SPI /* puts SPI: ready */
-#define CONFIG_MXC_SPI /* driver for the SPI controllers*/
-#define CONFIG_CMD_SPI /* SPI serial bus support */
 
 /*
  * MMC Configs
  * */
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      MMC_SDHC1_BASE_ADDR
 
-#define CONFIG_MMC
-
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
 /*
  * Eth Configs
  */
 #define CONFIG_MII
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC
 
 #define CONFIG_FEC_MXC
@@ -82,43 +63,42 @@
 #define CONFIG_ETHPRIME                "FEC"
 #define CONFIG_FEC_MXC_PHYADDR 0
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE           /* disable vendor parameters protection (serial#, ethaddr) */
-#define CONFIG_CONS_INDEX              1 /* use UART0 : used by serial driver */
-#define CONFIG_BAUDRATE                        115200
 
 /***********************************************************
  * Command definition
  ***********************************************************/
 
-#define CONFIG_CMD_BOOTZ
-#undef CONFIG_CMD_IMLS
-
 /* Environment variables */
 
-#define CONFIG_BOOTDELAY       1
 
 #define CONFIG_LOADADDR                0x91000000      /* loadaddr env var */
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
-       "image=uImage\0" \
+       "image=zImage\0" \
+       "fdt_file=imx51-ts4800.dtb\0" \
+       "fdt_addr=0x90fe0000\0" \
        "mmcdev=0\0" \
-       "mmcpart=1\0" \
-       "mmcargs=setenv bootargs root=/dev/mmcblk0p2 rootwait rw\0" \
+       "mmcpart=2\0" \
+       "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+       "mmcargs=setenv bootargs root=${mmcroot}\0" \
        "addtty=setenv bootargs ${bootargs} console=ttymxc0,${baudrate}\0" \
        "loadbootscript=" \
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
                "source\0" \
        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};\0" \
+       "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs addtty; " \
-                "bootm; "
+               "if run loadfdt; then " \
+                       "bootz ${loadaddr} - ${fdt_addr}; " \
+               "else " \
+                       "echo ERR: cannot load FDT; " \
+               "fi; "
+
 
 #define CONFIG_BOOTCOMMAND \
        "mmc dev ${mmcdev}; if mmc rescan; then " \
@@ -134,18 +114,9 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
-#define CONFIG_CMDLINE_EDITING
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
@@ -157,8 +128,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       (IRAM_BASE_ADDR)
 #define CONFIG_SYS_INIT_RAM_SIZE       (IRAM_SIZE)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_SYS_INIT_SP_OFFSET \
        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
@@ -175,7 +144,6 @@
 
 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 #define CONFIG_ENV_SIZE        (8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV 0
 
 #endif