ARM: rmobile: Zap CONFIG_SYS_CLK_FREQ where applicable

[u-boot] / include / configs / ulcb.h

diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h
index c613c733f50d5d19045bb7e0dcc04edeadeb5b2d..6f2a0cc56dce90b8930cc03138b607a6116c1562 100644 (file)
--- a/include/configs/ulcb.h
+++ b/include/configs/ulcb.h
@@ -1,62 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * include/configs/ulcb.h
  *     This file is ULCB board configuration.
  *
  * Copyright (C) 2017 Renesas Electronics Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
  */
 
 #ifndef __ULCB_H
 #define __ULCB_H
 
-#undef DEBUG
-
 #include "rcar-gen3-common.h"
 
-/* SCIF */
-#define CONFIG_CONS_SCIF2
-#define CONFIG_CONS_INDEX      2
-
-/* [A] Hyper Flash */
-/* use to RPC(SPI Multi I/O Bus Controller) */
-
 /* Ethernet RAVB */
 #define CONFIG_BITBANGMII
 #define CONFIG_BITBANGMII_MULTI
 
-/* Board Clock */
-/* XTAL_CLK : 33.33MHz */
-#define CONFIG_SYS_CLK_FREQ    33333333u
-
 /* Generic Timer Definitions (use in assembler source) */
 #define COUNTER_FREQUENCY      0xFE502A        /* 16.66MHz from CPclk */
 
-/* CPLD SPI */
-#define CONFIG_CMD_SPI
-#define CONFIG_SOFT_SPI
-#define SPI_DELAY      udelay(0)
-#define SPI_SDA(val)   ulcb_softspi_sda(val)
-#define SPI_SCL(val)   ulcb_softspi_scl(val)
-#define SPI_READ       ulcb_softspi_read()
-#ifndef        __ASSEMBLY__
-void ulcb_softspi_sda(int);
-void ulcb_softspi_scl(int);
-unsigned char ulcb_softspi_read(void);
-#endif
-
-/* i2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SH
-#define CONFIG_SYS_I2C_SLAVE           0x60
-#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS      1
-#define CONFIG_SYS_I2C_SH_SPEED0       400000
-#define CONFIG_SH_I2C_DATA_HIGH                4
-#define CONFIG_SH_I2C_DATA_LOW         5
-#define CONFIG_SH_I2C_CLOCK            10000000
-
-#define CONFIG_SYS_I2C_POWERIC_ADDR    0x30
-
 /* Environment in eMMC, at the end of 2nd "boot sector" */
 #define CONFIG_ENV_OFFSET              (-CONFIG_ENV_SIZE)
 #define CONFIG_SYS_MMC_ENV_DEV         1