ARM: uniphier: increase CONFIG_SYS_MONITOR_LEN

[u-boot] / include / configs / uniphier.h

diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 5ab06f6072dd5d8bf21fb23ecd93e6d11db30499..a00bfd97bd89c18a57949f68028e683176c0aab1 100644 (file)
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -33,7 +33,7 @@
 
 #define CONFIG_SYS_MAX_FLASH_SECT      256
 #define CONFIG_SYS_MONITOR_BASE                0
-#define CONFIG_SYS_MONITOR_LEN         0x00080000      /* 512KB */
+#define CONFIG_SYS_MONITOR_LEN         0x00090000      /* 576KB */
 #define CONFIG_SYS_FLASH_BASE          0
 
 /*
@@ -48,15 +48,10 @@
 
 /* serial console configuration */
 
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-
-#define CONFIG_CMDLINE_EDITING         /* add command line history     */
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE            (CONFIG_SYS_CBSIZE)
 
-#define CONFIG_CONS_INDEX              1
-
 #define CONFIG_ENV_OFFSET                      0x100000
 #define CONFIG_ENV_SIZE                                0x2000
 /* #define CONFIG_ENV_OFFSET_REDUND    (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
@@ -90,12 +85,10 @@
 #define CONFIG_GATEWAYIP               192.168.11.1
 #define CONFIG_NETMASK                 255.255.255.0
 
-#define CONFIG_LOADADDR                        0x84000000
+#define CONFIG_LOADADDR                        0x85000000
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_BOOTM_LEN           (32 << 20)
 
-#define CONFIG_CMDLINE_EDITING         /* add command line history     */
-
 #if defined(CONFIG_ARM64)
 /* ARM Trusted Firmware */
 #define BOOT_IMAGES \
@@ -120,7 +113,7 @@
 #define CONFIG_BOOTFILE                        "fitImage"
 #define LINUXBOOT_ENV_SETTINGS \
        "fit_addr=0x00100000\0" \
-       "fit_addr_r=0x84100000\0" \
+       "fit_addr_r=0x85100000\0" \
        "fit_size=0x00f00000\0" \
        "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
                "bootm $fit_addr\0" \
@@ -133,7 +126,7 @@
 #ifdef CONFIG_ARM64
 #define CONFIG_BOOTFILE                        "Image.gz"
 #define LINUXBOOT_CMD                  "booti"
-#define KERNEL_ADDR_LOAD               "kernel_addr_load=0x84200000\0"
+#define KERNEL_ADDR_LOAD               "kernel_addr_load=0x85200000\0"
 #define KERNEL_ADDR_R                  "kernel_addr_r=0x82080000\0"
 #else
 #define CONFIG_BOOTFILE                        "zImage"
@@ -143,15 +136,15 @@
 #endif
 #define LINUXBOOT_ENV_SETTINGS \
        "fdt_addr=0x00100000\0" \
-       "fdt_addr_r=0x84100000\0" \
+       "fdt_addr_r=0x85100000\0" \
        "fdt_size=0x00008000\0" \
        "kernel_addr=0x00200000\0" \
        KERNEL_ADDR_LOAD \
        KERNEL_ADDR_R \
-       "kernel_size=0x00800000\0" \
-       "ramdisk_addr=0x00a00000\0" \
-       "ramdisk_addr_r=0x84a00000\0" \
-       "ramdisk_size=0x00600000\0" \
+       "kernel_size=0x00e00000\0" \
+       "ramdisk_addr=0x01000000\0" \
+       "ramdisk_addr_r=0x86000000\0" \
+       "ramdisk_size=0x00800000\0" \
        "ramdisk_file=rootfs.cpio.uboot\0" \
        "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
                "if test $kernel_addr_load = $kernel_addr_r; then " \
@@ -197,17 +190,17 @@
                "tftpboot $second_image && " \
                "mmc write $loadaddr 0 100 && " \
                "tftpboot $third_image && " \
-               "mmc write $loadaddr 100 700\0" \
+               "mmc write $loadaddr 100 f00\0" \
        "nandupdate=nand erase 0 0x00100000 &&"                 \
                "tftpboot $second_image && " \
                "nand write $loadaddr 0 0x00020000 && " \
                "tftpboot $third_image && " \
-               "nand write $loadaddr 0x00020000 0x000e0000\0" \
+               "nand write $loadaddr 0x00020000 0x001e0000\0" \
        "usbupdate=usb start &&" \
                "tftpboot $second_image && " \
                "usb write $loadaddr 0 100 && " \
                "tftpboot $third_image && " \
-               "usb write $loadaddr 100 700\0" \
+               "usb write $loadaddr 100 f00\0" \
        BOOT_IMAGES \
        LINUXBOOT_ENV_SETTINGS
 
@@ -228,8 +221,6 @@
 
 #define CONFIG_SPL_STACK               (0x00100000)
 
-#define CONFIG_SPL_FRAMEWORK
-
 #define CONFIG_SYS_NAND_U_BOOT_OFFS            0x20000
 
 /* subtract sizeof(struct image_header) */