ARM Update mach-types

[u-boot] / include / configs / vme8349.h

diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 1477552df407702c7c892ed0893c35a9778ec230..f9db73b2dcdf3fbd38d08fcfff176aa229ed449d 100644 (file)
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -152,7 +152,6 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase TO (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write TO (ms) */
 
-#define CONFIG_SYS_MID_FLASH_JUMP      0x7F000000
 #define CONFIG_SYS_MONITOR_BASE                TEXT_BASE       /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
@@ -179,7 +178,8 @@
  * External Local Bus rate is
  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
  */
-#define CONFIG_SYS_LCRR                (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
 #define CONFIG_SYS_LBC_LBCR    0x00000000
 
 #undef CONFIG_SYS_LB_SDRAM     /* if board has SDRAM on local bus */
@@ -224,7 +224,7 @@
 #define CONFIG_SYS_I2C1_OFFSET 0x3000
 #define CONFIG_SYS_I2C2_OFFSET 0x3100
 #define CONFIG_SYS_I2C_OFFSET  CONFIG_SYS_I2C1_OFFSET
-/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SPD_BUS_NUM... */
+/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
 
 #define CONFIG_SYS_I2C_8574_ADDR2       0x20    /* I2C1, PCF8574 */
 
@@ -555,7 +555,7 @@
 #define CONFIG_ROOTPATH                /tftpboot/rootfs
 #define CONFIG_BOOTFILE                uImage
 
-#define CONFIG_LOADADDR                500000  /* def location for tftp and bootm */
+#define CONFIG_LOADADDR                800000  /* def location for tftp and bootm */
 
 #define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS                        /* boot command will set bootargs */
@@ -582,7 +582,7 @@
        "update=protect off fff00000 fff3ffff; "                        \
                "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \
        "upd=run load update\0"                                         \
-       "fdtaddr=400000\0"                                              \
+       "fdtaddr=780000\0"                                              \
        "fdtfile=vme8349.dtb\0"                                         \
        ""