* (C) Copyright 2010-2012
* NVIDIA Corporation <www.nvidia.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
-#include <asm/sizes.h>
-#include "tegra2-common.h"
-
-/* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE tegra2-whistler
-#define CONFIG_OF_CONTROL
-#define CONFIG_OF_SEPARATE
+#include <linux/sizes.h>
+#include "tegra20-common.h"
/* High-level configuration options */
-#define V_PROMPT "Tegra2 (Whistler) # "
-#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Whistler"
+#define V_PROMPT "Tegra20 (Whistler) # "
+#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Whistler"
/* Board-specific serial config */
-#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTA
-#define CONFIG_TEGRA2_UARTA_UAA_UAB
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_TEGRA_UARTA_UAA_UAB
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER
-#define CONFIG_SYS_BOARD_ODMDATA 0x2B080105 /* lp?, 512MB, UARTA */
#define CONFIG_BOARD_EARLY_INIT_F
/* I2C */
-#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_TEGRA
#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS 4
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-
/*
* Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes
- * the user plugged the standard 8MB MoviNAND card into J29/HSMMC/POP. If
+ * the user plugged the standard 8GB MoviNAND card into J29/HSMMC/POP. If
* they didn't, the boot sector layout may be different. However, use of that
* particular card is standard practice as far as I know.
*/
#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET ((2 * 512 * 1024) - CONFIG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
/* USB Host support */
#define CONFIG_USB_EHCI
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#include "tegra2-common-post.h"
+#include "tegra-common-post.h"
#endif /* __CONFIG_H */