ata: Migrate CONFIG_SCSI_AHCI to Kconfig

[u-boot] / include / configs / xilinx_zynqmp.h

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 30b5b345204ad74c53719853e4fc35cb256f5cac..493e3e30d567fc540462293ec182ab24d69b5f22 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -29,9 +29,6 @@
 #define CONFIG_SYS_MEMTEST_START       0
 #define CONFIG_SYS_MEMTEST_END         1000
 
-/* Have release address at the end of 256MB for now */
-#define CPU_RELEASE_ADDR       0xFFFFFF0
-
 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
 
 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
@@ -45,14 +42,12 @@
 /* Serial setup */
 #define CONFIG_ARM_DCC
 #define CONFIG_CPU_ARMV8
-#define CONFIG_ZYNQ_SERIAL
 
 #define CONFIG_CONS_INDEX              0
 #define CONFIG_SYS_BAUDRATE_TABLE \
        { 4800, 9600, 19200, 38400, 57600, 115200 }
 
 /* Command line configuration */
-#define CONFIG_CMD_ENV
 #define CONFIG_MP
 
 /* BOOTP options */
@@ -77,18 +72,9 @@
 # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
 #  define CONFIG_ZYNQ_SDHCI_MAX_FREQ   200000000
 # endif
-# define CONFIG_ENV_IS_IN_FAT
-# define FAT_ENV_DEVICE_AND_PART       "0:auto"
-# define FAT_ENV_FILE                  "uboot.env"
-# define FAT_ENV_INTERFACE             "mmc"
-#endif
-
-#if defined(CONFIG_MMC_SDHCI_ZYNQ) || defined(CONFIG_ZYNQMP_USB)
-# define CONFIG_FAT_WRITE
 #endif
 
 #ifdef CONFIG_NAND_ARASAN
-# define CONFIG_CMD_NAND_LOCK_UNLOCK
 # define CONFIG_SYS_MAX_NAND_DEVICE    1
 # define CONFIG_SYS_NAND_SELF_INIT
 # define CONFIG_SYS_NAND_ONFI_DETECTION
@@ -99,12 +85,9 @@
 #define CONFIG_SYS_LOAD_ADDR           0x8000000
 
 #if defined(CONFIG_ZYNQMP_USB)
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   0x1800000
 #define DFU_DEFAULT_POLL_TIMEOUT       300
 #define CONFIG_USB_CABLE_CHECK
-#define CONFIG_CMD_THOR_DOWNLOAD
 #define CONFIG_USB_FUNCTION_THOR
 #define CONFIG_THOR_RESET_OFF
 #define DFU_ALT_INFO_RAM \
@@ -119,17 +102,6 @@
                DFU_ALT_INFO_RAM
 
 #ifndef CONFIG_SPL_BUILD
-# define CONFIG_USB_FUNCTION_FASTBOOT
-# define CONFIG_CMD_FASTBOOT
-# define CONFIG_ANDROID_BOOT_IMAGE
-# define CONFIG_FASTBOOT_BUF_ADDR 0x100000
-# define CONFIG_FASTBOOT_BUF_SIZE 0x6000000
-# define CONFIG_FASTBOOT_FLASH
-# ifdef CONFIG_MMC_SDHCI_ZYNQ
-#  define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
-# endif
-
-# define CONFIG_RANDOM_UUID
 # define PARTS_DEFAULT \
        "partitions=uuid_disk=${uuid_gpt_disk};" \
        "name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
@@ -146,16 +118,11 @@
 #endif
 
 /* Do not preserve environment */
-#if !defined(CONFIG_ENV_IS_IN_FAT)
-#define CONFIG_ENV_IS_NOWHERE          1
-#endif
 #define CONFIG_ENV_SIZE                        0x8000
 
 /* Monitor Command Prompt */
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE              2048
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
@@ -163,13 +130,11 @@
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM)
-# define CONFIG_NET_MULTI
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 # define CONFIG_PHY_MARVELL
 # define CONFIG_PHY_NATSEMI
 # define CONFIG_PHY_TI
-# define CONFIG_PHY_GIGE
 # define CONFIG_PHY_VITESSE
 # define CONFIG_PHY_REALTEK
 # define PHY_ANEG_TIMEOUT       20000
@@ -184,7 +149,6 @@
 
 /* EEPROM */
 #ifdef CONFIG_ZYNQMP_EEPROM
-# define CONFIG_CMD_EEPROM
 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN                2
 # define CONFIG_SYS_I2C_EEPROM_ADDR            0x54
 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     4
@@ -194,12 +158,10 @@
 
 #ifdef CONFIG_SATA_CEVA
 #define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID    2
 #define CONFIG_SYS_SCSI_MAX_LUN                1
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                         CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_SCSI
 #endif
 
 #define CONFIG_SYS_BOOTM_LEN   (60 * 1024 * 1024)
@@ -271,7 +233,6 @@
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
 
 /* u-boot is like dtb */
 #define CONFIG_SPL_FS_LOAD_ARGS_NAME   "u-boot.bin"
@@ -299,11 +260,13 @@
 # define CONFIG_ENV_MAX_ENTRIES        10
 
 # define CONFIG_SYS_SPL_MALLOC_START   0x20000000
-# define CONFIG_SYS_SPL_MALLOC_SIZE    0x10000000
+# define CONFIG_SYS_SPL_MALLOC_SIZE    0x100000
 
 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
 # error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
 #endif
 #endif
 
+#define CONFIG_BOARD_EARLY_INIT_F
+
 #endif /* __XILINX_ZYNQMP_H */