usb: dwc3: Add DWC3 controller driver support

[u-boot] / include / configs / xpedite517x.h

diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index 51bdd095eb0acdeebd27555ce4b1d70af2e7c603..669aa53c9138e90216db3456f2360a72067e946a 100644 (file)
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -14,7 +14,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_MPC86xx         1       /* MPC86xx */
 #define CONFIG_MPC8641         1       /* MPC8641 specific */
 #define CONFIG_XPEDITE5140     1       /* MPC8641HPCN board specific */
 #define CONFIG_SYS_BOARD_NAME  "XPedite5170"
@@ -24,6 +23,8 @@
 #define CONFIG_BAT_RW          1       /* Use common BAT rw code */
 #define CONFIG_HIGH_BATS       1       /* High BATs supported and enabled */
 #define CONFIG_ALTIVEC         1
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
 
 #define        CONFIG_SYS_TEXT_BASE    0xfff00000
 
@@ -40,7 +41,7 @@
 /*
  * DDR config
  */
-#define CONFIG_FSL_DDR2
+#define CONFIG_SYS_FSL_DDR2
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
@@ -242,13 +243,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C                         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C                                /* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED           100000  /* M41T00 only supports 100 KHz */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_OFFSET          0x3000
-#define CONFIG_SYS_I2C2_OFFSET         0x3100
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       100000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED      100000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
 
 /* PEX8518 slave I2C interface */
 #define CONFIG_SYS_I2C_PEX8518_ADDR    0x70
@@ -524,8 +526,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Command configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -534,14 +534,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_CMD_PCI
@@ -555,12 +552,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING 1               /* Command-line editing */
 #define CONFIG_LOADADDR                0x1000000       /* default location for tftp and bootm */
 #define CONFIG_BOOTDELAY       3               /* -1 disables auto-boot */