# define CONFIG_CMD_SF
#endif
+/* NOR */
+#ifndef CONFIG_SYS_NO_FLASH
+# define CONFIG_SYS_FLASH_BASE 0xE2000000
+# define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024)
+# define CONFIG_SYS_MAX_FLASH_BANKS 1
+# define CONFIG_SYS_MAX_FLASH_SECT 512
+# define CONFIG_SYS_FLASH_ERASE_TOUT 1000
+# define CONFIG_SYS_FLASH_WRITE_TOUT 5000
+# define CONFIG_FLASH_SHOW_PROGRESS 10
+# define CONFIG_SYS_FLASH_CFI
+# undef CONFIG_SYS_FLASH_EMPTY_INFO
+# define CONFIG_FLASH_CFI_DRIVER
+# undef CONFIG_SYS_FLASH_PROTECTION
+# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#endif
+
/* MMC */
#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
# define CONFIG_MMC
# define CONFIG_SYS_I2C_ZYNQ_SLAVE 1
#endif
+/* EEPROM */
+#ifdef CONFIG_ZYNQ_EEPROM
+# define CONFIG_CMD_EEPROM
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+# define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */
+#endif
+
#define CONFIG_BOOTP_SERVERIP
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_MAY_FAIL
+/* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE (128 << 10)
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
/* Environment */
-#define CONFIG_ENV_SIZE 0x10000 /* Env. sector size */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_LOAD_ADDR 0
+#ifndef CONFIG_ENV_IS_NOWHERE
+# ifndef CONFIG_SYS_NO_FLASH
+# define CONFIG_ENV_IS_IN_FLASH
+# elif defined(CONFIG_SYS_NO_FLASH)
+# define CONFIG_ENV_IS_NOWHERE
+# endif
+
+# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+# define CONFIG_ENV_OFFSET 0xE0000
+# define CONFIG_CMD_SAVEENV
+#endif
+
+/* Default environment */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fit_image=fit.itb\0" \
+ "load_addr=0x2000000\0" \
+ "fit_size=0x800000\0" \
+ "flash_off=0x100000\0" \
+ "nor_flash_off=0xE2100000\0" \
+ "fdt_high=0x20000000\0" \
+ "initrd_high=0x20000000\0" \
+ "norboot=echo Copying FIT from NOR flash to RAM... && " \
+ "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
+ "bootm ${load_addr}\0" \
+ "sdboot=echo Copying FIT from SD to RAM... && " \
+ "fatload mmc 0 ${load_addr} ${fit_image} && " \
+ "bootm ${load_addr}\0" \
+ "jtagboot=echo TFTPing FIT to RAM... && " \
+ "tftpboot ${load_addr} ${fit_image} && " \
+ "bootm ${load_addr}\0"
+#define CONFIG_BOOTCOMMAND "run $modeboot"
+#define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */
+#define CONFIG_SYS_LOAD_ADDR 0 /* default? */
/* Miscellaneous configurable options */
#define CONFIG_SYS_PROMPT "zynq-uboot> "
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
+#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
sizeof(CONFIG_SYS_PROMPT) + 16)
/* Physical Memory map */
-#define CONFIG_SYS_TEXT_BASE 0
+#define CONFIG_SYS_TEXT_BASE 0x4000000
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE 0
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
+/* FDT support */
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/* RSA support */
+#define CONFIG_FIT_SIGNATURE
+#define CONFIG_RSA
+
/* Boot FreeBSD/vxWorks from an ELF image */
#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
# define CONFIG_API
# define CONFIG_SYS_MMC_MAX_DEVICE 1
#endif
+#define CONFIG_SYS_LDSCRIPT "arch/arm/cpu/armv7/zynq/u-boot.lds"
+
/* Commands */
#include <config_cmd_default.h>