zynq: Implement dump clock command

[u-boot] / include / configs / zynq-common.h

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 402009ee95699e830c6429cf327093be5b1f1de8..d6dc74581e455bbb23c3ec52faf7aa82e41522d8 100644 (file)
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -35,27 +35,12 @@
 #define CONFIG_SYS_BAUDRATE_TABLE  \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-/* Zynq Serial driver */
-#ifdef CONFIG_ZYNQ_SERIAL_UART0
-# define CONFIG_ZYNQ_SERIAL_BASEADDR0  0xE0000000
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE0  CONFIG_BAUDRATE
-# define CONFIG_ZYNQ_SERIAL_CLOCK0     50000000
-#endif
-
-#ifdef CONFIG_ZYNQ_SERIAL_UART1
-# define CONFIG_ZYNQ_SERIAL_BASEADDR1  0xE0001000
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE1  CONFIG_BAUDRATE
-# define CONFIG_ZYNQ_SERIAL_CLOCK1     50000000
-#endif
-
-#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
-# define CONFIG_ZYNQ_SERIAL
-#endif
-
 /* DCC driver */
 #if defined(CONFIG_ZYNQ_DCC)
 # define CONFIG_ARM_DCC
 # define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
+#else
+# define CONFIG_ZYNQ_SERIAL
 #endif
 
 /* Ethernet driver */
@@ -132,8 +117,21 @@
 /* Total Size of Environment Sector */
 #define CONFIG_ENV_SIZE                        (128 << 10)
 
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
 /* Environment */
-#define CONFIG_ENV_IS_NOWHERE
+#ifndef CONFIG_ENV_IS_NOWHERE
+# ifndef CONFIG_SYS_NO_FLASH
+#  define CONFIG_ENV_IS_IN_FLASH
+# elif defined(CONFIG_SYS_NO_FLASH)
+#  define CONFIG_ENV_IS_NOWHERE
+# endif
+
+# define CONFIG_ENV_SECT_SIZE          CONFIG_ENV_SIZE
+# define CONFIG_ENV_OFFSET             0xE0000
+# define CONFIG_CMD_SAVEENV
+#endif
 
 /* Default environment */
 #define CONFIG_EXTRA_ENV_SETTINGS      \
@@ -151,7 +149,7 @@
                "fatload mmc 0 ${load_addr} ${fit_image} && " \
                "bootm ${load_addr}\0" \
        "jtagboot=echo TFTPing FIT to RAM... && " \
-               "tftp ${load_addr} ${fit_image} && " \
+               "tftpboot ${load_addr} ${fit_image} && " \
                "bootm ${load_addr}\0"
 #define CONFIG_BOOTCOMMAND             "run $modeboot"
 #define CONFIG_BOOTDELAY               3 /* -1 to Disable autoboot */
@@ -165,6 +163,8 @@
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_SYS_LONGHELP
+#define CONFIG_CLOCKS
+#define CONFIG_CMD_CLK
 #define CONFIG_SYS_MAXARGS             15 /* max number of command args */
 #define CONFIG_SYS_CBSIZE              256 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -199,6 +199,18 @@
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE     1 /* enable fit_format_{error,warning}() */
 
+/* FDT support */
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/* RSA support */
+#define CONFIG_FIT_SIGNATURE
+#define CONFIG_RSA
+
+/* Extend size of kernel image for uncompression */
+#define CONFIG_SYS_BOOTM_LEN   (20 * 1024 * 1024)
+
 /* Boot FreeBSD/vxWorks from an ELF image */
 #if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
 # define CONFIG_API
@@ -206,11 +218,14 @@
 # define CONFIG_SYS_MMC_MAX_DEVICE     1
 #endif
 
+#define CONFIG_SYS_LDSCRIPT  "arch/arm/cpu/armv7/zynq/u-boot.lds"
+
 /* Commands */
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_TFTPPUT
 
 #endif /* __CONFIG_ZYNQ_COMMON_H */