COMPAT_UNKNOWN,
COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */
COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */
- COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra20 Keyboard */
COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */
COMPAT_NVIDIA_TEGRA20_PWM, /* Tegra 2 PWM controller */
COMPAT_NVIDIA_TEGRA124_DC, /* Tegra 124 Display controller */
COMPAT_NVIDIA_TEGRA124_SDMMC, /* Tegra124 SDMMC controller */
COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */
COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */
- COMPAT_NVIDIA_TEGRA124_PCIE, /* Tegra 124 PCIe controller */
- COMPAT_NVIDIA_TEGRA30_PCIE, /* Tegra 30 PCIe controller */
- COMPAT_NVIDIA_TEGRA20_PCIE, /* Tegra 20 PCIe controller */
COMPAT_NVIDIA_TEGRA124_XUSB_PADCTL,
/* Tegra124 XUSB pad controller */
COMPAT_NVIDIA_TEGRA210_XUSB_PADCTL,
COMPAT_INTEL_PCH, /* Intel PCH */
COMPAT_INTEL_IRQ_ROUTER, /* Intel Interrupt Router */
COMPAT_ALTERA_SOCFPGA_DWMAC, /* SoCFPGA Ethernet controller */
+ COMPAT_ALTERA_SOCFPGA_DWMMC, /* SoCFPGA DWMMC controller */
+ COMPAT_ALTERA_SOCFPGA_DWC2USB, /* SoCFPGA DWC2 USB controller */
COMPAT_INTEL_BAYTRAIL_FSP, /* Intel Bay Trail FSP */
COMPAT_INTEL_BAYTRAIL_FSP_MDP, /* Intel FSP memory-down params */
int fdtdec_next_compatible_subnode(const void *blob, int node,
enum fdt_compat_id id, int *depthp);
-/**
- * Look up an address property in a node and return it as an address.
- * The property must hold either one address with no trailing data or
- * one address with a length. This is only tested on 32-bit machines.
+/*
+ * Look up an address property in a node and return the parsed address, and
+ * optionally the parsed size.
+ *
+ * This variant assumes a known and fixed number of cells are used to
+ * represent the address and size.
+ *
+ * You probably don't want to use this function directly except to parse
+ * non-standard properties, and never to parse the "reg" property. Instead,
+ * use one of the "auto" variants below, which automatically honor the
+ * #address-cells and #size-cells properties in the parent node.
+ *
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param prop_name name of property to find
+ * @param index which address to retrieve from a list of addresses. Often 0.
+ * @param na the number of cells used to represent an address
+ * @param ns the number of cells used to represent a size
+ * @param sizep a pointer to store the size into. Use NULL if not required
+ * @return address, if found, or FDT_ADDR_T_NONE if not
+ */
+fdt_addr_t fdtdec_get_addr_size_fixed(const void *blob, int node,
+ const char *prop_name, int index, int na, int ns,
+ fdt_size_t *sizep);
+
+/*
+ * Look up an address property in a node and return the parsed address, and
+ * optionally the parsed size.
+ *
+ * This variant automatically determines the number of cells used to represent
+ * the address and size by parsing the provided parent node's #address-cells
+ * and #size-cells properties.
+ *
+ * @param blob FDT blob
+ * @param parent parent node of @node
+ * @param node node to examine
+ * @param prop_name name of property to find
+ * @param index which address to retrieve from a list of addresses. Often 0.
+ * @param sizep a pointer to store the size into. Use NULL if not required
+ * @return address, if found, or FDT_ADDR_T_NONE if not
+ */
+fdt_addr_t fdtdec_get_addr_size_auto_parent(const void *blob, int parent,
+ int node, const char *prop_name, int index, fdt_size_t *sizep);
+
+/*
+ * Look up an address property in a node and return the parsed address, and
+ * optionally the parsed size.
+ *
+ * This variant automatically determines the number of cells used to represent
+ * the address and size by parsing the parent node's #address-cells
+ * and #size-cells properties. The parent node is automatically found.
+ *
+ * The automatic parent lookup implemented by this function is slow.
+ * Consequently, fdtdec_get_addr_size_auto_parent() should be used where
+ * possible.
+ *
+ * @param blob FDT blob
+ * @param parent parent node of @node
+ * @param node node to examine
+ * @param prop_name name of property to find
+ * @param index which address to retrieve from a list of addresses. Often 0.
+ * @param sizep a pointer to store the size into. Use NULL if not required
+ * @return address, if found, or FDT_ADDR_T_NONE if not
+ */
+fdt_addr_t fdtdec_get_addr_size_auto_noparent(const void *blob, int node,
+ const char *prop_name, int index, fdt_size_t *sizep);
+
+/*
+ * Look up an address property in a node and return the parsed address.
+ *
+ * This variant hard-codes the number of cells used to represent the address
+ * and size based on sizeof(fdt_addr_t) and sizeof(fdt_size_t). It also
+ * always returns the first address value in the property (index 0).
+ *
+ * Use of this function is not recommended due to the hard-coding of cell
+ * counts. There is no programmatic validation that these hard-coded values
+ * actually match the device tree content in any way at all. This assumption
+ * can be satisfied by manually ensuring CONFIG_PHYS_64BIT is appropriately
+ * set in the U-Boot build and exercising strict control over DT content to
+ * ensure use of matching #address-cells/#size-cells properties. However, this
+ * approach is error-prone; those familiar with DT will not expect the
+ * assumption to exist, and could easily invalidate it. If the assumption is
+ * invalidated, this function will not report the issue, and debugging will
+ * be required. Instead, use fdtdec_get_addr_size_auto_parent().
*
* @param blob FDT blob
* @param node node to examine
fdt_addr_t fdtdec_get_addr(const void *blob, int node,
const char *prop_name);
-/**
- * Look up an address property in a node and return it as an address.
- * The property must hold one address with a length. This is only tested
- * on 32-bit machines.
+/*
+ * Look up an address property in a node and return the parsed address, and
+ * optionally the parsed size.
+ *
+ * This variant hard-codes the number of cells used to represent the address
+ * and size based on sizeof(fdt_addr_t) and sizeof(fdt_size_t). It also
+ * always returns the first address value in the property (index 0).
+ *
+ * Use of this function is not recommended due to the hard-coding of cell
+ * counts. There is no programmatic validation that these hard-coded values
+ * actually match the device tree content in any way at all. This assumption
+ * can be satisfied by manually ensuring CONFIG_PHYS_64BIT is appropriately
+ * set in the U-Boot build and exercising strict control over DT content to
+ * ensure use of matching #address-cells/#size-cells properties. However, this
+ * approach is error-prone; those familiar with DT will not expect the
+ * assumption to exist, and could easily invalidate it. If the assumption is
+ * invalidated, this function will not report the issue, and debugging will
+ * be required. Instead, use fdtdec_get_addr_size_auto_parent().
*
* @param blob FDT blob
* @param node node to examine
* @param prop_name name of property to find
+ * @param sizep a pointer to store the size into. Use NULL if not required
* @return address, if found, or FDT_ADDR_T_NONE if not
*/
fdt_addr_t fdtdec_get_addr_size(const void *blob, int node,
int fdtdec_get_pci_vendev(const void *blob, int node,
u16 *vendor, u16 *device);
-/**
- * Look at the pci address of a device node that represents a PCI device
- * and parse the bus, device and function number from it. For some cases
- * like the bus number encoded in reg property is not correct after pci
- * enumeration, this function looks through the node's compatible strings
- * to get these numbers extracted instead.
- *
- * @param blob FDT blob
- * @param node node to examine
- * @param addr pci address in the form of fdt_pci_addr
- * @param bdf returns bus, device, function triplet
- * @return 0 if ok, negative on error
- */
-int fdtdec_get_pci_bdf(const void *blob, int node,
- struct fdt_pci_addr *addr, pci_dev_t *bdf);
-
/**
* Look at the pci address of a device node that represents a PCI device
* and return base address of the pci device's registers.
*
- * @param blob FDT blob
- * @param node node to examine
+ * @param dev device to examine
* @param addr pci address in the form of fdt_pci_addr
* @param bar returns base address of the pci device's registers
* @return 0 if ok, negative on error
*/
-int fdtdec_get_pci_bar32(const void *blob, int node,
- struct fdt_pci_addr *addr, u32 *bar);
+int fdtdec_get_pci_bar32(struct udevice *dev, struct fdt_pci_addr *addr,
+ u32 *bar);
/**
* Look up a 32-bit integer property in a node and return it. The property
s32 fdtdec_get_int(const void *blob, int node, const char *prop_name,
s32 default_val);
+/**
+ * Unsigned version of fdtdec_get_int. The property must have at least
+ * 4 bytes of data. The value of the first cell is returned.
+ *
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param prop_name name of property to find
+ * @param default_val default value to return if the property is not found
+ * @return unsigned integer value, if found, or default_val if not
+ */
+unsigned int fdtdec_get_uint(const void *blob, int node, const char *prop_name,
+ unsigned int default_val);
+
/**
* Get a variable-sized number from a property
*
int *seqp);
/**
- * Get the offset of the given chosen node
+ * Get a property from the /chosen node
+ *
+ * @param blob Device tree blob (if NULL, then NULL is returned)
+ * @param name Property name to look up
+ * @return Value of property, or NULL if it does not exist
+ */
+const char *fdtdec_get_chosen_prop(const void *blob, const char *name);
+
+/**
+ * Get the offset of the given /chosen node
*
* This looks up a property in /chosen containing the path to another node,
* then finds the offset of that node.
projects / u-boot / blobdiff