#include "compiler.h"
#include <asm/byteorder.h>
+/* Define this to avoid #ifdefs later on */
+struct lmb;
+
#ifdef USE_HOSTCC
/* new uImage format support enabled on host */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
+#define IMAGE_ENABLE_IGNORE 0
+#define IMAGE_INDENT_STRING ""
+
#else
#include <lmb.h>
#include <asm/u-boot.h>
#include <command.h>
+/* Take notice of the 'ignore' property for hashes */
+#define IMAGE_ENABLE_IGNORE 1
+#define IMAGE_INDENT_STRING " "
+
#endif /* USE_HOSTCC */
#if defined(CONFIG_FIT)
#include <libfdt.h>
#include <fdt_support.h>
-#define CONFIG_MD5 /* FIT images need MD5 support */
-#define CONFIG_SHA1 /* and SHA1 */
+# ifdef CONFIG_SPL_BUILD
+# ifdef CONFIG_SPL_CRC32_SUPPORT
+# define IMAGE_ENABLE_CRC32 1
+# endif
+# ifdef CONFIG_SPL_MD5_SUPPORT
+# define IMAGE_ENABLE_MD5 1
+# endif
+# ifdef CONFIG_SPL_SHA1_SUPPORT
+# define IMAGE_ENABLE_SHA1 1
+# endif
+# else
+# define CONFIG_CRC32 /* FIT images need CRC32 support */
+# define CONFIG_MD5 /* and MD5 */
+# define CONFIG_SHA1 /* and SHA1 */
+# define IMAGE_ENABLE_CRC32 1
+# define IMAGE_ENABLE_MD5 1
+# define IMAGE_ENABLE_SHA1 1
+# endif
+
+#ifndef IMAGE_ENABLE_CRC32
+#define IMAGE_ENABLE_CRC32 0
+#endif
+
+#ifndef IMAGE_ENABLE_MD5
+#define IMAGE_ENABLE_MD5 0
+#endif
+
+#ifndef IMAGE_ENABLE_SHA1
+#define IMAGE_ENABLE_SHA1 0
+#endif
+
+#endif /* CONFIG_FIT */
+
+#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
+# define IMAGE_ENABLE_RAMDISK_HIGH 1
+#else
+# define IMAGE_ENABLE_RAMDISK_HIGH 0
+#endif
+
+#ifdef CONFIG_OF_LIBFDT
+# define IMAGE_ENABLE_OF_LIBFDT 1
+#else
+# define IMAGE_ENABLE_OF_LIBFDT 0
+#endif
+
+#ifdef CONFIG_SYS_BOOT_GET_CMDLINE
+# define IMAGE_BOOT_GET_CMDLINE 1
+#else
+# define IMAGE_BOOT_GET_CMDLINE 0
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+# define IMAAGE_OF_BOARD_SETUP 1
+#else
+# define IMAAGE_OF_BOARD_SETUP 0
#endif
/*
ulong rd_start, rd_end;/* ramdisk start/end */
-#ifdef CONFIG_OF_LIBFDT
char *ft_addr; /* flat dev tree address */
-#endif
ulong ft_len; /* length of flat device tree */
ulong initrd_start;
int verify; /* getenv("verify")[0] != 'n' */
#define BOOTM_STATE_START (0x00000001)
-#define BOOTM_STATE_LOADOS (0x00000002)
-#define BOOTM_STATE_RAMDISK (0x00000004)
-#define BOOTM_STATE_FDT (0x00000008)
-#define BOOTM_STATE_OS_CMDLINE (0x00000010)
-#define BOOTM_STATE_OS_BD_T (0x00000020)
-#define BOOTM_STATE_OS_PREP (0x00000040)
-#define BOOTM_STATE_OS_GO (0x00000080)
+#define BOOTM_STATE_FINDOS (0x00000002)
+#define BOOTM_STATE_FINDOTHER (0x00000004)
+#define BOOTM_STATE_LOADOS (0x00000008)
+#define BOOTM_STATE_RAMDISK (0x00000010)
+#define BOOTM_STATE_FDT (0x00000020)
+#define BOOTM_STATE_OS_CMDLINE (0x00000040)
+#define BOOTM_STATE_OS_BD_T (0x00000080)
+#define BOOTM_STATE_OS_PREP (0x00000100)
+#define BOOTM_STATE_OS_FAKE_GO (0x00000200) /* 'Almost' run the OS */
+#define BOOTM_STATE_OS_GO (0x00000400)
int state;
#ifdef CONFIG_LMB
#endif
void genimg_print_time(time_t timestamp);
+/* What to do with a image load address ('load = <> 'in the FIT) */
+enum fit_load_op {
+ FIT_LOAD_IGNORED, /* Ignore load address */
+ FIT_LOAD_OPTIONAL, /* Can be provided, but optional */
+ FIT_LOAD_REQUIRED, /* Must be provided */
+};
+
#ifndef USE_HOSTCC
/* Image format types, returned by _get_format() routine */
#define IMAGE_FORMAT_INVALID 0x00
#define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */
#define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */
-int genimg_get_format(void *img_addr);
+int genimg_get_format(const void *img_addr);
int genimg_has_config(bootm_headers_t *images);
ulong genimg_get_image(ulong img_addr);
int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, ulong *rd_start, ulong *rd_end);
+/**
+ * fit_image_load() - load an image from a FIT
+ *
+ * This deals with all aspects of loading an image from a FIT, including
+ * selecting the right image based on configuration, verifying it, printing
+ * out progress messages, checking the type/arch/os and optionally copying it
+ * to the right load address.
+ *
+ * @param images Boot images structure
+ * @param prop_name Property name to look up (FIT_..._PROP)
+ * @param addr Address of FIT in memory
+ * @param fit_unamep On entry this is the requested image name
+ * (e.g. "kernel@1") or NULL to use the default. On exit
+ * points to the selected image name
+ * @param fit_uname_configp On entry this is the requested configuration
+ * name (e.g. "conf@1") or NULL to use the default. On
+ * exit points to the selected configuration name.
+ * @param arch Expected architecture (IH_ARCH_...)
+ * @param image_type Required image type (IH_TYPE_...). If this is
+ * IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD
+ * also.
+ * @param bootstage_id ID of starting bootstage to use for progress updates.
+ * This will be added to the BOOTSTAGE_SUB values when
+ * calling bootstage_mark()
+ * @param load_op Decribes what to do with the load address
+ * @param datap Returns address of loaded image
+ * @param lenp Returns length of loaded image
+ */
+int fit_image_load(bootm_headers_t *images, const char *prop_name, ulong addr,
+ const char **fit_unamep, const char **fit_uname_configp,
+ int arch, int image_type, int bootstage_id,
+ enum fit_load_op load_op, ulong *datap, ulong *lenp);
-#ifdef CONFIG_OF_LIBFDT
-int boot_get_fdt(int flag, int argc, char * const argv[],
- bootm_headers_t *images, char **of_flat_tree, ulong *of_size);
+/**
+ * fit_get_node_from_config() - Look up an image a FIT by type
+ *
+ * This looks in the selected conf@ node (images->fit_uname_cfg) for a
+ * particular image type (e.g. "kernel") and then finds the image that is
+ * referred to.
+ *
+ * For example, for something like:
+ *
+ * images {
+ * kernel@1 {
+ * ...
+ * };
+ * };
+ * configurations {
+ * conf@1 {
+ * kernel = "kernel@1";
+ * };
+ * };
+ *
+ * the function will return the node offset of the kernel@1 node, assuming
+ * that conf@1 is the chosen configuration.
+ *
+ * @param images Boot images structure
+ * @param prop_name Property name to look up (FIT_..._PROP)
+ * @param addr Address of FIT in memory
+ */
+int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name,
+ ulong addr);
+
+int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
+ bootm_headers_t *images,
+ char **of_flat_tree, ulong *of_size);
void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob);
int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size);
-#endif
-#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len,
ulong *initrd_start, ulong *initrd_end);
-#endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */
-#ifdef CONFIG_SYS_BOOT_GET_CMDLINE
int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end);
-#endif /* CONFIG_SYS_BOOT_GET_CMDLINE */
#ifdef CONFIG_SYS_BOOT_GET_KBD
int boot_get_kbd(struct lmb *lmb, bd_t **kbd);
#endif /* CONFIG_SYS_BOOT_GET_KBD */
}
#endif /* USE_HOSTCC */
+/**
+ * Set up properties in the FDT
+ *
+ * This sets up properties in the FDT that is to be passed to linux.
+ *
+ * @images: Images information
+ * @blob: FDT to update
+ * @of_size: Size of the FDT
+ * @lmb: Points to logical memory block structure
+ * @return 0 if ok, <0 on failure
+ */
+int image_setup_libfdt(bootm_headers_t *images, void *blob,
+ int of_size, struct lmb *lmb);
+
+/**
+ * Set up the FDT to use for booting a kernel
+ *
+ * This performs ramdisk setup, sets up the FDT if required, and adds
+ * paramters to the FDT if libfdt is available.
+ *
+ * @param images Images information
+ * @return 0 if ok, <0 on failure
+ */
+int image_setup_linux(bootm_headers_t *images);
+
+/**
+ * bootz_setup() - Extract stat and size of a Linux xImage
+ *
+ * @image: Address of image
+ * @start: Returns start address of image
+ * @end : Returns end address of image
+ * @return 0 if OK, 1 if the image was not recognised
+ */
+int bootz_setup(ulong image, ulong *start, ulong *end);
+
+
/*******************************************************************/
/* New uImage format specific code (prefixed with fit_) */
/*******************************************************************/
#define FIT_IMAGES_PATH "/images"
#define FIT_CONFS_PATH "/configurations"
-/* hash node */
+/* hash/signature node */
#define FIT_HASH_NODENAME "hash"
#define FIT_ALGO_PROP "algo"
#define FIT_VALUE_PROP "value"
#define FIT_IGNORE_PROP "uboot-ignore"
+#define FIT_SIG_NODENAME "signature"
/* image node */
#define FIT_DATA_PROP "data"
void fit_print_contents(const void *fit);
void fit_image_print(const void *fit, int noffset, const char *p);
-void fit_image_print_hash(const void *fit, int noffset, const char *p);
/**
* fit_get_end - get FIT image size
int fit_image_hash_get_algo(const void *fit, int noffset, char **algo);
int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
int *value_len);
-#ifndef USE_HOSTCC
-int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore);
-#endif
int fit_set_timestamp(void *fit, int noffset, time_t timestamp);
-int fit_set_hashes(void *fit);
-int fit_image_set_hashes(void *fit, int image_noffset);
-int fit_image_hash_set_value(void *fit, int noffset, uint8_t *value,
- int value_len);
-int fit_image_check_hashes(const void *fit, int noffset);
-int fit_all_image_check_hashes(const void *fit);
+/**
+ * fit_add_verification_data() - add verification data to FIT image nodes
+ *
+ * @keydir: Directory containing keys
+ * @kwydest: FDT blob to write public key information to
+ * @fit: Pointer to the FIT format image header
+ * @comment: Comment to add to signature nodes
+ * @require_keys: Mark all keys as 'required'
+ *
+ * Adds hash values for all component images in the FIT blob.
+ * Hashes are calculated for all component images which have hash subnodes
+ * with algorithm property set to one of the supported hash algorithms.
+ *
+ * Also add signatures if signature nodes are present.
+ *
+ * returns
+ * 0, on success
+ * libfdt error code, on failure
+ */
+int fit_add_verification_data(const char *keydir, void *keydest, void *fit,
+ const char *comment, int require_keys);
+
+int fit_image_verify(const void *fit, int noffset);
+int fit_config_verify(const void *fit, int conf_noffset);
+int fit_all_image_verify(const void *fit);
int fit_image_check_os(const void *fit, int noffset, uint8_t os);
int fit_image_check_arch(const void *fit, int noffset, uint8_t arch);
int fit_image_check_type(const void *fit, int noffset, uint8_t type);
int fit_conf_find_compat(const void *fit, const void *fdt);
int fit_conf_get_node(const void *fit, const char *conf_uname);
-int fit_conf_get_kernel_node(const void *fit, int noffset);
-int fit_conf_get_ramdisk_node(const void *fit, int noffset);
-int fit_conf_get_fdt_node(const void *fit, int noffset);
+
+/**
+ * fit_conf_get_prop_node() - Get node refered to by a configuration
+ * @fit: FIT to check
+ * @noffset: Offset of conf@xxx node to check
+ * @prop_name: Property to read from the conf node
+ *
+ * The conf@ nodes contain references to other nodes, using properties
+ * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"),
+ * return the offset of the node referred to (e.g. offset of node
+ * "/images/kernel@1".
+ */
+int fit_conf_get_prop_node(const void *fit, int noffset,
+ const char *prop_name);
void fit_conf_print(const void *fit, int noffset, const char *p);
int calculate_hash(const void *data, int data_len, const char *algo,
uint8_t *value, int *value_len);
-#ifndef USE_HOSTCC
+/*
+ * At present we only support signing on the host, and verification on the
+ * device
+ */
+#if defined(CONFIG_FIT_SIGNATURE)
+# ifdef USE_HOSTCC
+# define IMAGE_ENABLE_SIGN 1
+# define IMAGE_ENABLE_VERIFY 0
+#else
+# define IMAGE_ENABLE_SIGN 0
+# define IMAGE_ENABLE_VERIFY 1
+# endif
+#else
+# define IMAGE_ENABLE_SIGN 0
+# define IMAGE_ENABLE_VERIFY 0
+#endif
+
+#ifdef USE_HOSTCC
+# define gd_fdt_blob() NULL
+#else
+# define gd_fdt_blob() (gd->fdt_blob)
+#endif
+
+#ifdef CONFIG_FIT_BEST_MATCH
+#define IMAGE_ENABLE_BEST_MATCH 1
+#else
+#define IMAGE_ENABLE_BEST_MATCH 0
+#endif
+
+/* Information passed to the signing routines */
+struct image_sign_info {
+ const char *keydir; /* Directory conaining keys */
+ const char *keyname; /* Name of key to use */
+ void *fit; /* Pointer to FIT blob */
+ int node_offset; /* Offset of signature node */
+ struct image_sig_algo *algo; /* Algorithm information */
+ const void *fdt_blob; /* FDT containing public keys */
+ int required_keynode; /* Node offset of key to use: -1=any */
+ const char *require_keys; /* Value for 'required' property */
+};
+
+/* A part of an image, used for hashing */
+struct image_region {
+ const void *data;
+ int size;
+};
+
+struct image_sig_algo {
+ const char *name; /* Name of algorithm */
+
+ /**
+ * sign() - calculate and return signature for given input data
+ *
+ * @info: Specifies key and FIT information
+ * @data: Pointer to the input data
+ * @data_len: Data length
+ * @sigp: Set to an allocated buffer holding the signature
+ * @sig_len: Set to length of the calculated hash
+ *
+ * This computes input data signature according to selected algorithm.
+ * Resulting signature value is placed in an allocated buffer, the
+ * pointer is returned as *sigp. The length of the calculated
+ * signature is returned via the sig_len pointer argument. The caller
+ * should free *sigp.
+ *
+ * @return: 0, on success, -ve on error
+ */
+ int (*sign)(struct image_sign_info *info,
+ const struct image_region region[],
+ int region_count, uint8_t **sigp, uint *sig_len);
+
+ /**
+ * add_verify_data() - Add verification information to FDT
+ *
+ * Add public key information to the FDT node, suitable for
+ * verification at run-time. The information added depends on the
+ * algorithm being used.
+ *
+ * @info: Specifies key and FIT information
+ * @keydest: Destination FDT blob for public key data
+ * @return: 0, on success, -ve on error
+ */
+ int (*add_verify_data)(struct image_sign_info *info, void *keydest);
+
+ /**
+ * verify() - Verify a signature against some data
+ *
+ * @info: Specifies key and FIT information
+ * @data: Pointer to the input data
+ * @data_len: Data length
+ * @sig: Signature
+ * @sig_len: Number of bytes in signature
+ * @return 0 if verified, -ve on error
+ */
+ int (*verify)(struct image_sign_info *info,
+ const struct image_region region[], int region_count,
+ uint8_t *sig, uint sig_len);
+};
+
+/**
+ * image_get_sig_algo() - Look up a signature algortihm
+ *
+ * @param name Name of algorithm
+ * @return pointer to algorithm information, or NULL if not found
+ */
+struct image_sig_algo *image_get_sig_algo(const char *name);
+
+/**
+ * fit_image_verify_required_sigs() - Verify signatures marked as 'required'
+ *
+ * @fit: FIT to check
+ * @image_noffset: Offset of image node to check
+ * @data: Image data to check
+ * @size: Size of image data
+ * @sig_blob: FDT containing public keys
+ * @no_sigsp: Returns 1 if no signatures were required, and
+ * therefore nothing was checked. The caller may wish
+ * to fall back to other mechanisms, or refuse to
+ * boot.
+ * @return 0 if all verified ok, <0 on error
+ */
+int fit_image_verify_required_sigs(const void *fit, int image_noffset,
+ const char *data, size_t size, const void *sig_blob,
+ int *no_sigsp);
+
+/**
+ * fit_image_check_sig() - Check a single image signature node
+ *
+ * @fit: FIT to check
+ * @noffset: Offset of signature node to check
+ * @data: Image data to check
+ * @size: Size of image data
+ * @required_keynode: Offset in the control FDT of the required key node,
+ * if any. If this is given, then the image wil not
+ * pass verification unless that key is used. If this is
+ * -1 then any signature will do.
+ * @err_msgp: In the event of an error, this will be pointed to a
+ * help error string to display to the user.
+ * @return 0 if all verified ok, <0 on error
+ */
+int fit_image_check_sig(const void *fit, int noffset, const void *data,
+ size_t size, int required_keynode, char **err_msgp);
+
+/**
+ * fit_region_make_list() - Make a list of regions to hash
+ *
+ * Given a list of FIT regions (offset, size) provided by libfdt, create
+ * a list of regions (void *, size) for use by the signature creationg
+ * and verification code.
+ *
+ * @fit: FIT image to process
+ * @fdt_regions: Regions as returned by libfdt
+ * @count: Number of regions returned by libfdt
+ * @region: Place to put list of regions (NULL to allocate it)
+ * @return pointer to list of regions, or NULL if out of memory
+ */
+struct image_region *fit_region_make_list(const void *fit,
+ struct fdt_region *fdt_regions, int count,
+ struct image_region *region);
+
static inline int fit_image_check_target_arch(const void *fdt, int node)
{
return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT);
}
-#endif /* USE_HOSTCC */
#ifdef CONFIG_FIT_VERBOSE
#define fit_unsupported(msg) printf("! %s:%d " \