#define NAND_STATUS_READY 0x40
#define NAND_STATUS_WP 0x80
+#define NAND_DATA_IFACE_CHECK_ONLY -1
+
/*
* Constants for ECC_MODES
*/
*/
#define NAND_NEED_SCRAMBLING 0x00002000
+/* Device needs 3rd row address cycle */
+#define NAND_ROW_ADDR_3 0x00004000
+
/* Options valid for Samsung large page devices */
#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
struct nand_chip *active;
};
+/**
+ * struct nand_ecc_step_info - ECC step information of ECC engine
+ * @stepsize: data bytes per ECC step
+ * @strengths: array of supported strengths
+ * @nstrengths: number of supported strengths
+ */
+struct nand_ecc_step_info {
+ int stepsize;
+ const int *strengths;
+ int nstrengths;
+};
+
+/**
+ * struct nand_ecc_caps - capability of ECC engine
+ * @stepinfos: array of ECC step information
+ * @nstepinfos: number of ECC step information
+ * @calc_ecc_bytes: driver's hook to calculate ECC bytes per step
+ */
+struct nand_ecc_caps {
+ const struct nand_ecc_step_info *stepinfos;
+ int nstepinfos;
+ int (*calc_ecc_bytes)(int step_size, int strength);
+};
+
+/* a shorthand to generate struct nand_ecc_caps with only one ECC stepsize */
+#define NAND_ECC_CAPS_SINGLE(__name, __calc, __step, ...) \
+static const int __name##_strengths[] = { __VA_ARGS__ }; \
+static const struct nand_ecc_step_info __name##_stepinfo = { \
+ .stepsize = __step, \
+ .strengths = __name##_strengths, \
+ .nstrengths = ARRAY_SIZE(__name##_strengths), \
+}; \
+static const struct nand_ecc_caps __name = { \
+ .stepinfos = &__name##_stepinfo, \
+ .nstepinfos = 1, \
+ .calc_ecc_bytes = __calc, \
+}
+
/**
* struct nand_ecc_ctrl - Control structure for ECC
* @mode: ECC mode
* setting the read-retry mode. Mostly needed for MLC NAND.
* @ecc: [BOARDSPECIFIC] ECC control structure
* @buffers: buffer structure for read/write
+ * @buf_align: minimum buffer alignment required by a platform
* @hwcontrol: platform-specific hardware control structure
* @erase: [REPLACEABLE] erase function
* @scan_bbt: [REPLACEABLE] function to scan bad block table
* @read_retries: [INTERN] the number of read retry modes supported
* @onfi_set_features: [REPLACEABLE] set the features for ONFI nand
* @onfi_get_features: [REPLACEABLE] get the features for ONFI nand
- * @setup_data_interface: [OPTIONAL] setup the data interface and timing
+ * @setup_data_interface: [OPTIONAL] setup the data interface and timing. If
+ * chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this
+ * means the configuration should not be applied but
+ * only checked.
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
* lookup.
* structure which is shared among multiple independent
* devices.
* @priv: [OPTIONAL] pointer to private chip data
- * @errstat: [OPTIONAL] hardware specific function to perform
- * additional error status checks (determine if errors are
- * correctable).
* @write_page: [REPLACEABLE] High-level page write function
*/
int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
int (*erase)(struct mtd_info *mtd, int page);
int (*scan_bbt)(struct mtd_info *mtd);
- int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
- int status, int page);
int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offset, int data_len, const uint8_t *buf,
int oob_required, int page, int raw);
int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
int feature_addr, uint8_t *subfeature_para);
int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode);
- int (*setup_data_interface)(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only);
+ int (*setup_data_interface)(struct mtd_info *mtd, int chipnr,
+ const struct nand_data_interface *conf);
int chip_delay;
struct nand_ecc_ctrl ecc;
struct nand_buffers *buffers;
+ unsigned long buf_align;
struct nand_hw_control hwcontrol;
uint8_t *bbt;
void *extraoob, int extraooblen,
int threshold);
+int nand_check_ecc_caps(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
+int nand_match_ecc_req(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
+int nand_maximize_ecc(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
/* Reset and initialize a NAND device */
int nand_reset(struct nand_chip *chip, int chipnr);