#define _MMC_H_
#include <linux/list.h>
+#include <linux/sizes.h>
#include <linux/compiler.h>
#include <part.h>
#define SD_CMD_SWITCH_UHS18V 11
#define SD_CMD_APP_SET_BUS_WIDTH 6
+#define SD_CMD_APP_SD_STATUS 13
#define SD_CMD_ERASE_WR_BLK_START 32
#define SD_CMD_ERASE_WR_BLK_END 33
#define SD_CMD_APP_SEND_OP_COND 41
#define EXT_CSD_MAX_ENH_SIZE_MULT 157 /* R */
#define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */
#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
+#define EXT_CSD_BKOPS_EN 163 /* R/W & R/W/E */
#define EXT_CSD_WR_REL_PARAM 166 /* R */
#define EXT_CSD_WR_REL_SET 167 /* R/W */
#define EXT_CSD_RPMB_MULT 168 /* RO */
#define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */
#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
#define EXT_CSD_BOOT_MULT 226 /* RO */
+#define EXT_CSD_BKOPS_SUPPORT 502 /* RO */
/*
* EXT_CSD field definitions
#define EXT_CSD_BOOT_PART_NUM(x) (x << 3)
#define EXT_CSD_PARTITION_ACCESS(x) (x << 0)
+#define EXT_CSD_EXTRACT_BOOT_ACK(x) (((x) >> 6) & 0x1)
+#define EXT_CSD_EXTRACT_BOOT_PART(x) (((x) >> 3) & 0x7)
+#define EXT_CSD_EXTRACT_PARTITION_ACCESS(x) ((x) & 0x7)
+
#define EXT_CSD_BOOT_BUS_WIDTH_MODE(x) (x << 3)
#define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2)
#define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x)
/* forward decl. */
struct mmc;
-#ifdef CONFIG_DM_MMC_OPS
+#if CONFIG_IS_ENABLED(DM_MMC)
struct dm_mmc_ops {
/**
* send_cmd() - Send a command to the MMC device
struct mmc_ops {
int (*send_cmd)(struct mmc *mmc,
struct mmc_cmd *cmd, struct mmc_data *data);
- void (*set_ios)(struct mmc *mmc);
+ int (*set_ios)(struct mmc *mmc);
int (*init)(struct mmc *mmc);
int (*getcd)(struct mmc *mmc);
int (*getwp)(struct mmc *mmc);
struct mmc_config {
const char *name;
-#ifndef CONFIG_DM_MMC_OPS
+#if !CONFIG_IS_ENABLED(DM_MMC)
const struct mmc_ops *ops;
#endif
uint host_caps;
unsigned char part_type;
};
+struct sd_ssr {
+ unsigned int au; /* In sectors */
+ unsigned int erase_timeout; /* In milliseconds */
+ unsigned int erase_offset; /* In milliseconds */
+};
+
/*
* With CONFIG_DM_MMC enabled, struct mmc can be accessed from the MMC device
* with mmc_get_mmc_dev().
* TODO struct mmc should be in mmc_private but it's hard to fix right now
*/
struct mmc {
-#ifndef CONFIG_BLK
+#if !CONFIG_IS_ENABLED(BLK)
struct list_head link;
#endif
const struct mmc_config *cfg; /* provided configuration */
u8 part_support;
u8 part_attr;
u8 wr_rel_set;
- char part_config;
+ u8 part_config;
uint tran_speed;
uint read_bl_len;
uint write_bl_len;
uint erase_grp_size; /* in 512-byte sectors */
uint hc_wp_grp_size; /* in 512-byte sectors */
+ struct sd_ssr ssr; /* SD status register */
u64 capacity;
u64 capacity_user;
u64 capacity_boot;
u64 capacity_gp[4];
u64 enh_user_start;
u64 enh_user_size;
-#ifndef CONFIG_BLK
+#if !CONFIG_IS_ENABLED(BLK)
struct blk_desc block_dev;
#endif
char op_cond_pending; /* 1 if we are waiting on an op_cond command */
char init_in_progress; /* 1 if we have done mmc_start_init() */
char preinit; /* start init as early as possible */
int ddr_mode;
-#ifdef CONFIG_DM_MMC
+#if CONFIG_IS_ENABLED(DM_MMC)
struct udevice *dev; /* Device for this MMC controller */
#endif
};
* @return 0 if there is no MMC device, else the number of devices
*/
int get_mmc_num(void);
+int mmc_switch_part(struct mmc *mmc, unsigned int part_num);
int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf,
enum mmc_hwpart_conf_mode mode);
-#ifndef CONFIG_DM_MMC_OPS
+#if !CONFIG_IS_ENABLED(DM_MMC)
int mmc_getcd(struct mmc *mmc);
int board_mmc_getcd(struct mmc *mmc);
int mmc_getwp(struct mmc *mmc);
unsigned short cnt, unsigned char *key);
int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,
unsigned short cnt, unsigned char *key);
+#ifdef CONFIG_CMD_BKOPS_ENABLE
+int mmc_set_bkops_enable(struct mmc *mmc);
+#endif
+
/**
* Start device initialization and return immediately; it does not block on
* polling OCR (operation condition register) status. Then you should call
int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr);
int mmc_get_env_dev(void);
-struct pci_device_id;
-
-/**
- * pci_mmc_init() - set up PCI MMC devices
- *
- * This finds all the matching PCI IDs and sets them up as MMC devices.
- *
- * @name: Name to use for devices
- * @mmc_supported: PCI IDs to search for, terminated by {0, 0}
- */
-int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported);
-
/* Set block count limit because of 16 bit register limit on some hardware*/
#ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535