mmc: add HS200 support in MMC core

[u-boot] / include / mmc.h

diff --git a/include/mmc.h b/include/mmc.h
index 56fa869ea8faf92bc1e1331dbcf5d9e04ea9509a..407fddf94c3ff39372f215a6e967d27574029822 100644 (file)
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -56,6 +56,7 @@
 #define MMC_MODE_HS            (MMC_CAP(MMC_HS) | MMC_CAP(SD_HS))
 #define MMC_MODE_HS_52MHz      MMC_CAP(MMC_HS_52)
 #define MMC_MODE_DDR_52MHz     MMC_CAP(MMC_DDR_52)
+#define MMC_MODE_HS200         MMC_CAP(MMC_HS_200)
 
 #define MMC_MODE_8BIT          BIT(30)
 #define MMC_MODE_4BIT          BIT(29)
@@ -86,6 +87,7 @@
 #define MMC_CMD_SET_BLOCKLEN           16
 #define MMC_CMD_READ_SINGLE_BLOCK      17
 #define MMC_CMD_READ_MULTIPLE_BLOCK    18
+#define MMC_CMD_SEND_TUNING_BLOCK_HS200        21
 #define MMC_CMD_SET_BLOCK_COUNT         23
 #define MMC_CMD_WRITE_SINGLE_BLOCK     24
 #define MMC_CMD_WRITE_MULTIPLE_BLOCK   25
@@ -113,6 +115,13 @@
 #define SD_CMD_APP_SEND_OP_COND                41
 #define SD_CMD_APP_SEND_SCR            51
 
+static inline bool mmc_is_tuning_cmd(uint cmdidx)
+{
+       if (cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)
+               return true;
+       return false;
+}
+
 /* SCR definitions in different words */
 #define SD_HIGHSPEED_BUSY      0x00020000
 #define SD_HIGHSPEED_SUPPORTED 0x00020000
@@ -210,6 +219,13 @@
 #define EXT_CSD_CARD_TYPE_DDR_52       (EXT_CSD_CARD_TYPE_DDR_1_8V \
                                        | EXT_CSD_CARD_TYPE_DDR_1_2V)
 
+#define EXT_CSD_CARD_TYPE_HS200_1_8V   BIT(4)  /* Card can run at 200MHz */
+                                               /* SDR mode @1.8V I/O */
+#define EXT_CSD_CARD_TYPE_HS200_1_2V   BIT(5)  /* Card can run at 200MHz */
+                                               /* SDR mode @1.2V I/O */
+#define EXT_CSD_CARD_TYPE_HS200                (EXT_CSD_CARD_TYPE_HS200_1_8V | \
+                                        EXT_CSD_CARD_TYPE_HS200_1_2V)
+
 #define EXT_CSD_BUS_WIDTH_1    0       /* Card is in 1 bit mode */
 #define EXT_CSD_BUS_WIDTH_4    1       /* Card is in 4 bit mode */
 #define EXT_CSD_BUS_WIDTH_8    2       /* Card is in 8 bit mode */
@@ -219,6 +235,8 @@
 
 #define EXT_CSD_TIMING_LEGACY  0       /* no high speed */
 #define EXT_CSD_TIMING_HS      1       /* HS */
+#define EXT_CSD_TIMING_HS200   2       /* HS200 */
+
 #define EXT_CSD_BOOT_ACK_ENABLE                        (1 << 6)
 #define EXT_CSD_BOOT_PARTITION_ENABLE          (1 << 3)
 #define EXT_CSD_PARTITION_ACCESS_ENABLE                (1 << 0)