]> git.sur5r.net Git - u-boot/blobdiff - include/net.h
rpi: link to another model number info source
[u-boot] / include / net.h
index d09bec9de1560e8c2443269fb2045f95ea84e7f7..a739f45bbbcea264bbf7ca070a45929c6fd41caf 100644 (file)
@@ -86,11 +86,13 @@ enum eth_state_t {
  * @iobase: The base address of the hardware registers
  * @enetaddr: The Ethernet MAC address that is loaded from EEPROM or env
  * @phy_interface: PHY interface to use - see PHY_INTERFACE_MODE_...
+ * @max_speed: Maximum speed of Ethernet connection supported by MAC
  */
 struct eth_pdata {
        phys_addr_t iobase;
        unsigned char enetaddr[6];
        int phy_interface;
+       int max_speed;
 };
 
 enum eth_recv_flags {
@@ -149,7 +151,9 @@ struct udevice *eth_get_dev(void); /* get the current device */
  */
 struct udevice *eth_get_dev_by_name(const char *devname);
 unsigned char *eth_get_ethaddr(void); /* get the current device MAC */
+
 /* Used only when NetConsole is enabled */
+int eth_is_active(struct udevice *dev); /* Test device for active state */
 int eth_init_state_only(void); /* Set active state */
 void eth_halt_state_only(void); /* Set passive state */
 #endif
@@ -179,8 +183,7 @@ int eth_unregister(struct eth_device *dev);/* Remove network device */
 
 extern struct eth_device *eth_current;
 
-static inline __attribute__((always_inline))
-struct eth_device *eth_get_dev(void)
+static __always_inline struct eth_device *eth_get_dev(void)
 {
        return eth_current;
 }
@@ -195,15 +198,17 @@ static inline unsigned char *eth_get_ethaddr(void)
        return NULL;
 }
 
+/* Used only when NetConsole is enabled */
+int eth_is_active(struct eth_device *dev); /* Test device for active state */
 /* Set active state */
-static inline __attribute__((always_inline)) int eth_init_state_only(void)
+static __always_inline int eth_init_state_only(void)
 {
        eth_get_dev()->state = ETH_STATE_ACTIVE;
 
        return 0;
 }
 /* Set passive state */
-static inline __attribute__((always_inline)) void eth_halt_state_only(void)
+static __always_inline void eth_halt_state_only(void)
 {
        eth_get_dev()->state = ETH_STATE_PASSIVE;
 }
@@ -229,8 +234,8 @@ void eth_set_current(void);         /* set nterface to ethcur var */
 
 int eth_get_dev_index(void);           /* get the device index */
 void eth_parse_enetaddr(const char *addr, uchar *enetaddr);
-int eth_getenv_enetaddr(char *name, uchar *enetaddr);
-int eth_setenv_enetaddr(char *name, const uchar *enetaddr);
+int eth_getenv_enetaddr(const char *name, uchar *enetaddr);
+int eth_setenv_enetaddr(const char *name, const uchar *enetaddr);
 
 /*
  * Get the hardware address for an ethernet interface .
@@ -512,7 +517,7 @@ enum proto_t {
        TFTPSRV, TFTPPUT, LINKLOCAL
 };
 
-extern char    net_boot_file_name[128];/* Boot File name */
+extern char    net_boot_file_name[1024];/* Boot File name */
 /* The actual transferred size of the bootfile (in bytes) */
 extern u32     net_boot_file_size;
 /* Boot file size in blocks as reported by the DHCP server */
@@ -653,7 +658,7 @@ int nc_input_packet(uchar *pkt, struct in_addr src_ip, unsigned dest_port,
        unsigned src_port, unsigned len);
 #endif
 
-static inline __attribute__((always_inline)) int eth_is_on_demand_init(void)
+static __always_inline int eth_is_on_demand_init(void)
 {
 #ifdef CONFIG_NETCONSOLE
        extern enum proto_t net_loop_last_protocol;
@@ -813,8 +818,18 @@ void copy_filename(char *dst, const char *src, int size);
 /* get a random source port */
 unsigned int random_port(void);
 
-/* Update U-Boot over TFTP */
-int update_tftp(ulong addr);
+/**
+ * update_tftp - Update firmware over TFTP (via DFU)
+ *
+ * This function updates board's firmware via TFTP
+ *
+ * @param addr - memory address where data is stored
+ * @param interface - the DFU medium name - e.g. "mmc"
+ * @param devstring - the DFU medium number - e.g. "1"
+ *
+ * @return - 0 on success, other value on failure
+ */
+int update_tftp(ulong addr, char *interface, char *devstring);
 
 /**********************************************************************/