#ifdef CONFIG_POST
#define POST_POWERON 0x01 /* test runs on power-on booting */
-#define POST_POWERNORMAL 0x02 /* test runs on normal booting */
-#define POST_POWERFAIL 0x04 /* test runs on power-fail booting */
+#define POST_NORMAL 0x02 /* test runs on normal booting */
+#define POST_SLOWTEST 0x04 /* test is slow, enabled by key press */
#define POST_POWERTEST 0x08 /* test runs after watchdog reset */
+#define POST_COLDBOOT 0x80 /* first boot after power-on */
+
#define POST_ROM 0x0100 /* test runs in ROM */
#define POST_RAM 0x0200 /* test runs in RAM */
#define POST_MANUAL 0x0400 /* test runs on diag command */
#define POST_REBOOT 0x0800 /* test may cause rebooting */
+#define POST_PREREL 0x1000 /* test runs before relocation */
+
+#define POST_CRITICAL 0x2000 /* Use failbootcmd if test failed */
+#define POST_STOP 0x4000 /* Interrupt POST sequence on fail */
#define POST_MEM (POST_RAM | POST_ROM)
-#define POST_ALWAYS (POST_POWERNORMAL | \
- POST_POWERFAIL | \
- POST_MANUAL | \
+#define POST_ALWAYS (POST_NORMAL | \
+ POST_SLOWTEST | \
+ POST_MANUAL | \
POST_POWERON )
+#define POST_FAIL_SAVE 0x80
+
#ifndef __ASSEMBLY__
struct post_test {
char *desc;
int flags;
int (*test) (int flags);
+ int (*init_f) (void);
+ void (*reloc) (void);
+ unsigned long testid;
};
+int post_init_f (void);
void post_bootmode_init (void);
int post_bootmode_get (unsigned int * last_test);
void post_bootmode_clear (void);
+void post_output_backlog ( void );
int post_run (char *name, int flags);
int post_info (char *name);
int post_log (char *format, ...);
+#ifndef CONFIG_RELOC_FIXUP_WORKS
void post_reloc (void);
+#endif
+unsigned long post_time_ms (unsigned long base);
extern struct post_test post_list[];
extern unsigned int post_list_size;
+extern int post_hotkeys_pressed(void);
+/*
+ * If GCC is configured to use a version of GAS that supports
+ * the .gnu_attribute directive, it will use that directive to
+ * record certain properties of the output code.
+ * This feature is new to GCC 4.3.0.
+ * .gnu_attribute is new to GAS 2.18.
+ */
+#if (__GNUC__ >= 4 && __GNUC_MINOR__ >= 3)
+/* Tag_GNU_Power_ABI_FP/soft-float */
+#define GNU_FPOST_ATTR asm(".gnu_attribute 4, 2");
+#else
+#define GNU_FPOST_ATTR
+#endif /* __GNUC__ */
#endif /* __ASSEMBLY__ */
-#define CFG_POST_RTC 0x00000001
-#define CFG_POST_WATCHDOG 0x00000002
-#define CFG_POST_MEMORY 0x00000004
-#define CFG_POST_CPU 0x00000008
-#define CFG_POST_I2C 0x00000010
-#define CFG_POST_CACHE 0x00000020
-#define CFG_POST_UART 0x00000040
-#define CFG_POST_ETHER 0x00000080
-#define CFG_POST_SPI 0x00000100
-#define CFG_POST_USB 0x00000200
-#define CFG_POST_SPR 0x00000400
+#define CONFIG_SYS_POST_RTC 0x00000001
+#define CONFIG_SYS_POST_WATCHDOG 0x00000002
+#define CONFIG_SYS_POST_MEMORY 0x00000004
+#define CONFIG_SYS_POST_CPU 0x00000008
+#define CONFIG_SYS_POST_I2C 0x00000010
+#define CONFIG_SYS_POST_CACHE 0x00000020
+#define CONFIG_SYS_POST_UART 0x00000040
+#define CONFIG_SYS_POST_ETHER 0x00000080
+#define CONFIG_SYS_POST_SPI 0x00000100
+#define CONFIG_SYS_POST_USB 0x00000200
+#define CONFIG_SYS_POST_SPR 0x00000400
+#define CONFIG_SYS_POST_SYSMON 0x00000800
+#define CONFIG_SYS_POST_DSP 0x00001000
+#define CONFIG_SYS_POST_OCM 0x00002000
+#define CONFIG_SYS_POST_FPU 0x00004000
+#define CONFIG_SYS_POST_ECC 0x00008000
+#define CONFIG_SYS_POST_BSPEC1 0x00010000
+#define CONFIG_SYS_POST_BSPEC2 0x00020000
+#define CONFIG_SYS_POST_BSPEC3 0x00040000
+#define CONFIG_SYS_POST_BSPEC4 0x00080000
+#define CONFIG_SYS_POST_BSPEC5 0x00100000
+#define CONFIG_SYS_POST_CODEC 0x00200000
#endif /* CONFIG_POST */