/*--------------------------------------------------------------------- */
/* Special Purpose Registers */
/*--------------------------------------------------------------------- */
- #define srr2 0x3de /* save/restore register 2 */
- #define srr3 0x3df /* save/restore register 3 */
+ #define srr2 0x3de /* save/restore register 2 */
+ #define srr3 0x3df /* save/restore register 3 */
#define dbsr 0x3f0 /* debug status register */
#define dbcr0 0x3f2 /* debug control register 0 */
#define dbcr1 0x3bd /* debug control register 1 */
#define tsr 0x3d8 /* timer status register */
#define tcr 0x3da /* timer control register */
#define pit 0x3db /* programmable interval timer */
- #define sgr 0x3b9 /* storage guarded reg */
- #define dcwr 0x3ba /* data cache write-thru reg*/
- #define sler 0x3bb /* storage little-endian reg */
+ #define sgr 0x3b9 /* storage guarded reg */
+ #define dcwr 0x3ba /* data cache write-thru reg*/
+ #define sler 0x3bb /* storage little-endian reg */
#define cdbcr 0x3d7 /* cache debug cntrl reg */
#define icdbdr 0x3d3 /* instr cache dbug data reg*/
#define ccr0 0x3b3 /* core configuration register */
#define su0r 0x3bc /* storage user-defined register 0 */
#define zpr 0x3b0 /* zone protection regsiter */
- #define tbl 0x11c /* time base lower - privileged write */
- #define tbu 0x11d /* time base upper - privileged write */
+ #define tbl 0x11c /* time base lower - privileged write */
+ #define tbu 0x11d /* time base upper - privileged write */
#define sprg4r 0x104 /* Special purpose general 4 - read only */
#define sprg5r 0x105 /* Special purpose general 5 - read only */
#define UIC_MAL_RXEOB 0x00080000 /* MAL RXEOB */
#define UIC_MAL_TXDE 0x00040000 /* MAL TXDE */
#define UIC_MAL_RXDE 0x00020000 /* MAL RXDE */
-#define UIC_ENET 0x00010000 /* Ethernet */
+#define UIC_ENET 0x00010000 /* Ethernet0 */
+#define UIC_ENET1 0x00004000 /* Ethernet1 on 405EP */
+#define UIC_ECC_CE 0x00004000 /* ECC Correctable Error on 405GP */
#define UIC_EXT_PCI_SERR 0x00008000 /* External PCI SERR# */
-#define UIC_ECC_CE 0x00004000 /* ECC Correctable Error */
#define UIC_PCI_PM 0x00002000 /* PCI Power Management */
#define UIC_EXT0 0x00000040 /* External interrupt 0 */
#define UIC_EXT1 0x00000020 /* External interrupt 1 */
#define mem_bear 0x10 /* bus error address reg */
#endif
#define mem_mcopt1 0x20 /* memory controller options 1 */
+ #define mem_status 0x24 /* memory status */
#define mem_rtr 0x30 /* refresh timer reg */
#define mem_pmit 0x34 /* power management idle timer */
#define mem_mb0cf 0x40 /* memory bank 0 configuration */
#define mem_mb1cf 0x44 /* memory bank 1 configuration */
+#ifndef CONFIG_405EP
#define mem_mb2cf 0x48 /* memory bank 2 configuration */
#define mem_mb3cf 0x4c /* memory bank 3 configuration */
+#endif
#define mem_sdtr1 0x80 /* timing reg 1 */
#ifndef CONFIG_405EP
#define mem_ecccf 0x94 /* ECC configuration */
#define mem_eccerr 0x98 /* ECC error status */
#endif
+#ifndef CONFIG_405EP
/******************************************************************************
* Decompression Controller
******************************************************************************/
/* There are 0x400 of the following registers, from krom0 to krom3ff*/
/* Only the first one is given here. */
#define krom0 0x400 /* SRAM/ROM read/write */
+#endif
/******************************************************************************
* Power Management
#define pb2cr 0x02 /* periph bank 2 config reg */
#define pb3cr 0x03 /* periph bank 3 config reg */
#define pb4cr 0x04 /* periph bank 4 config reg */
+#ifndef CONFIG_405EP
#define pb5cr 0x05 /* periph bank 5 config reg */
#define pb6cr 0x06 /* periph bank 6 config reg */
#define pb7cr 0x07 /* periph bank 7 config reg */
+#endif
#define pb0ap 0x10 /* periph bank 0 access parameters */
#define pb1ap 0x11 /* periph bank 1 access parameters */
#define pb2ap 0x12 /* periph bank 2 access parameters */
#define pb3ap 0x13 /* periph bank 3 access parameters */
#define pb4ap 0x14 /* periph bank 4 access parameters */
+#ifndef CONFIG_405EP
#define pb5ap 0x15 /* periph bank 5 access parameters */
#define pb6ap 0x16 /* periph bank 6 access parameters */
#define pb7ap 0x17 /* periph bank 7 access parameters */
+#endif
#define pbear 0x20 /* periph bus error addr reg */
#define pbesr0 0x21 /* periph bus error status reg 0 */
#define pbesr1 0x22 /* periph bus error status reg 1 */
*-------------------------------------------------------------------------------
*/
#define PLLMR0_266_133_66 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
- PLL_MALDIV_1 | PLL_PCIDIV_4)
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_4)
#define PLLMR1_266_133_66 (PLL_FBKDIV_8 | \
- PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
- PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_133_66_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
- PLL_MALDIV_1 | PLL_PCIDIV_4)
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_4)
#define PLLMR1_133_66_66_33 (PLL_FBKDIV_4 | \
- PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \
- PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+ PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
- PLL_MALDIV_1 | PLL_PCIDIV_4)
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_4)
#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \
- PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \
- PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+ PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
- PLL_MALDIV_1 | PLL_PCIDIV_4)
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_4)
#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8 | \
- PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
- PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_266_66_33_33 (PLL_CPUDIV_1 | PLL_PLBDIV_4 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_2)
+#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
/*
* PLL Voltage Controlled Oscillator (VCO) definitions
#define PSR_PCI_ARBIT_EN 0x00000400
#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */
+#ifndef CONFIG_IOP480
/*
* PLL Voltage Controlled Oscillator (VCO) definitions
* Maximum and minimum values (in MHz) for correct PLL operation.
*/
#define VCO_MIN 400
#define VCO_MAX 800
+#endif /* #ifndef CONFIG_IOP480 */
#endif /* #ifdef CONFIG_405EP */
/******************************************************************************
#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
+#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
+#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
+#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
/*-----------------------------------------------------------------------------
| IIC Register Offsets
unsigned long freqPCI;
unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */
unsigned long pciClkSync; /* PCI clock is synchronous */
+ unsigned long freqVCOHz;
} PPC405_SYS_INFO;
#endif /* _ASMLANGUAGE */
line aligned data. */
#endif /* __PPC405_H__ */
-