fsl_diu: fix alignment error that caused malloc corruption

[u-boot] / lib_arm / board.c

diff --git a/lib_arm/board.c b/lib_arm/board.c
index 87848d94c0480de7f567273095aa3c172830a000..f02fdc87cac6a84312b25be5e77da88016bed1c6 100644 (file)
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -44,20 +44,19 @@
 #include <devices.h>
 #include <version.h>
 #include <net.h>
+#include <serial.h>
+#include <nand.h>
+#include <onenand_uboot.h>
 
 #ifdef CONFIG_DRIVER_SMC91111
-#include "../drivers/smc91111.h"
+#include "../drivers/net/smc91111.h"
 #endif
 #ifdef CONFIG_DRIVER_LAN91C96
-#include "../drivers/lan91c96.h"
+#include "../drivers/net/lan91c96.h"
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
-#endif
-
 ulong monitor_flash_len;
 
 #ifdef CONFIG_HAS_DATAFLASH
@@ -80,6 +79,11 @@ extern void cs8900_get_enetaddr (uchar * addr);
 extern void rtl8019_get_enetaddr (uchar * addr);
 #endif
 
+#if defined(CONFIG_HARD_I2C) || \
+    defined(CONFIG_SOFT_I2C)
+#include <i2c.h>
+#endif
+
 /*
  * Begin and End of memory area for malloc(), and current "brk"
  */
@@ -111,29 +115,26 @@ void *sbrk (ptrdiff_t increment)
        return ((void *) old);
 }
 
+
 /************************************************************************
  * Coloured LED functionality
  ************************************************************************
  * May be supplied by boards if desired
  */
 void inline __coloured_LED_init (void) {}
-void inline coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init"))); 
+void inline coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init")));
 void inline __red_LED_on (void) {}
 void inline red_LED_on (void) __attribute__((weak, alias("__red_LED_on")));
 void inline __red_LED_off(void) {}
-void inline red_LED_off(void)       __attribute__((weak, alias("__red_LED_off"))); 
+void inline red_LED_off(void)       __attribute__((weak, alias("__red_LED_off")));
 void inline __green_LED_on(void) {}
-void inline green_LED_on(void) __attribute__((weak, alias("__green_LED_on"))); 
+void inline green_LED_on(void) __attribute__((weak, alias("__green_LED_on")));
 void inline __green_LED_off(void) {}
-void inline green_LED_off(void)__attribute__((weak, alias("__green_LED_off"))); 
+void inline green_LED_off(void)__attribute__((weak, alias("__green_LED_off")));
 void inline __yellow_LED_on(void) {}
-void inline yellow_LED_on(void)__attribute__((weak, alias("__yellow_LED_on"))); 
+void inline yellow_LED_on(void)__attribute__((weak, alias("__yellow_LED_on")));
 void inline __yellow_LED_off(void) {}
-void inline yellow_LED_off(void)__attribute__((weak, alias("__yellow_LED_off"))); 
-
-
-
-
+void inline yellow_LED_off(void)__attribute__((weak, alias("__yellow_LED_off")));
 
 /************************************************************************
  * Init Utilities                                                      *
@@ -209,6 +210,15 @@ static void display_flash_config (ulong size)
 }
 #endif /* CFG_NO_FLASH */
 
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+static int init_func_i2c (void)
+{
+       puts ("I2C:   ");
+       i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+       puts ("ready\n");
+       return (0);
+}
+#endif
 
 /*
  * Breathe some life into the board...
@@ -251,6 +261,9 @@ init_fnc_t *init_sequence[] = {
 #endif
 #if defined(CONFIG_DISPLAY_BOARDINFO)
        checkboard,             /* display board info */
+#endif
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+       init_func_i2c,
 #endif
        dram_init,              /* configure available RAM banks */
        display_dram_config,
@@ -261,7 +274,7 @@ void start_armboot (void)
 {
        init_fnc_t **init_fnc_ptr;
        char *s;
-#ifndef CFG_NO_FLASH
+#if !defined(CFG_NO_FLASH) || defined (CONFIG_VFD) || defined(CONFIG_LCD)
        ulong size;
 #endif
 #if defined(CONFIG_VFD) || defined(CONFIG_LCD)
@@ -277,6 +290,8 @@ void start_armboot (void)
        gd->bd = (bd_t*)((char*)gd - sizeof(bd_t));
        memset (gd->bd, 0, sizeof (bd_t));
 
+       gd->flags |= GD_FLG_RELOC;
+
        monitor_flash_len = _bss_start - _armboot_start;
 
        for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
@@ -305,16 +320,19 @@ void start_armboot (void)
 #endif /* CONFIG_VFD */
 
 #ifdef CONFIG_LCD
-#      ifndef PAGE_SIZE
-#        define PAGE_SIZE 4096
-#      endif
-       /*
-        * reserve memory for LCD display (always full pages)
-        */
-       /* bss_end is defined in the board-specific linker script */
-       addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
-       size = lcd_setmem (addr);
-       gd->fb_base = addr;
+       /* board init may have inited fb_base */
+       if (!gd->fb_base) {
+#              ifndef PAGE_SIZE
+#                define PAGE_SIZE 4096
+#              endif
+               /*
+                * reserve memory for LCD display (always full pages)
+                */
+               /* bss_end is defined in the board-specific linker script */
+               addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
+               size = lcd_setmem (addr);
+               gd->fb_base = addr;
+       }
 #endif /* CONFIG_LCD */
 
        /* armboot_start is defined in the board-specific linker script */
@@ -325,6 +343,10 @@ void start_armboot (void)
        nand_init();            /* go init the NAND */
 #endif
 
+#if defined(CONFIG_CMD_ONENAND)
+       onenand_init();
+#endif
+
 #ifdef CONFIG_HAS_DATAFLASH
        AT91F_DataflashInit();
        dataflash_print_info();
@@ -393,9 +415,9 @@ void start_armboot (void)
 
        /* Perform network card initialisation if necessary */
 #ifdef CONFIG_DRIVER_TI_EMAC
-extern void dm644x_eth_set_mac_addr (const u_int8_t *addr);
+extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
        if (getenv ("ethaddr")) {
-               dm644x_eth_set_mac_addr(gd->bd->bi_enetaddr);
+               davinci_eth_set_mac_addr(gd->bd->bi_enetaddr);
        }
 #endif
 
@@ -427,6 +449,10 @@ extern void dm644x_eth_set_mac_addr (const u_int8_t *addr);
        puts ("Net:   ");
 #endif
        eth_initialize(gd->bd);
+#if defined(CONFIG_RESET_PHY_R)
+       debug ("Reset Ethernet PHY\n");
+       reset_phy();
+#endif
 #endif
        /* main_loop() can return to retry autoboot, if so just run it again. */
        for (;;) {