[MIPS] Initialize CP0 Cause before setting up CP0 Status register

[u-boot] / lib_ppc / board.c

diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 1e7f172d6710df8d26a99473adefa7adf3b8751a..ee0213e1acac8748330015fac23f659d6191e9b4 100644 (file)
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -35,13 +35,13 @@
 #ifdef CONFIG_MPC5xxx
 #include <mpc5xxx.h>
 #endif
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
 #include <ide.h>
 #endif
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
+#if defined(CONFIG_CMD_SCSI)
 #include <scsi.h>
 #endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #include <kgdb.h>
 #endif
 #ifdef CONFIG_STATUS_LED
@@ -76,18 +76,21 @@
 extern int update_flash_size (int flash_size);
 #endif
 
-#if defined(CONFIG_SOLIDCARD3)
+#if defined(CONFIG_SC3)
 extern void sc3_read_eeprom(void);
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#if defined(CONFIG_CMD_DOC)
 void doc_init (void);
 #endif
 #if defined(CONFIG_HARD_I2C) || \
     defined(CONFIG_SOFT_I2C)
 #include <i2c.h>
 #endif
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_HARD_SPI)
+#include <spi.h>
+#endif
+#if defined(CONFIG_CMD_NAND)
 void nand_init (void);
 #endif
 
@@ -118,7 +121,7 @@ extern ulong __init_end;
 extern ulong _end;
 ulong monitor_flash_len;
 
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
 #include <bedbug/type.h>
 #endif
 
@@ -139,10 +142,10 @@ static    ulong   mem_malloc_brk   = 0;
  */
 static void mem_malloc_init (void)
 {
-       ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
-
-       mem_malloc_end = dest_addr;
-       mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
+#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+       mem_malloc_end = CFG_MONITOR_BASE + gd->reloc_off;
+#endif
+       mem_malloc_start = mem_malloc_end - TOTAL_MALLOC_LEN;
        mem_malloc_brk = mem_malloc_start;
 
        memset ((void *) mem_malloc_start,
@@ -209,9 +212,12 @@ static int init_baudrate (void)
 
 /***********************************************************************/
 
-#ifdef CONFIG_ADD_RAM_INFO
-void board_add_ram_info(int);
-#endif
+void __board_add_ram_info(int use_default)
+{
+       /* please define platform specific board_add_ram_info() */
+}
+void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info")));
+
 
 static int init_func_ram (void)
 {
@@ -224,9 +230,7 @@ static int init_func_ram (void)
 
        if ((gd->ram_size = initdram (board_type)) > 0) {
                print_size (gd->ram_size, "");
-#ifdef CONFIG_ADD_RAM_INFO
                board_add_ram_info(0);
-#endif
                putc('\n');
                return (0);
        }
@@ -246,6 +250,16 @@ static int init_func_i2c (void)
 }
 #endif
 
+#if defined(CONFIG_HARD_SPI)
+static int init_func_spi (void)
+{
+       puts ("SPI:   ");
+       spi_init ();
+       puts ("ready\n");
+       return (0);
+}
+#endif
+
 /***********************************************************************/
 
 #if defined(CONFIG_WATCHDOG)
@@ -309,7 +323,9 @@ init_fnc_t *init_sequence[] = {
        prt_8260_rsr,
        prt_8260_clks,
 #endif /* CONFIG_8260 */
-
+#if defined(CONFIG_MPC83XX)
+       prt_83xx_rsr,
+#endif
        checkcpu,
 #if defined(CONFIG_MPC5xxx)
        prt_mpc5xxx_clks,
@@ -326,6 +342,9 @@ init_fnc_t *init_sequence[] = {
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
        init_func_i2c,
 #endif
+#if defined(CONFIG_HARD_SPI)
+       init_func_spi,
+#endif
 #if defined(CONFIG_DTT)                /* Digital Thermometers and Thermostats */
        dtt_init,
 #endif
@@ -342,6 +361,20 @@ init_fnc_t *init_sequence[] = {
        NULL,                   /* Terminate this list */
 };
 
+#ifndef CONFIG_MAX_MEM_MAPPED
+#define CONFIG_MAX_MEM_MAPPED (256 << 20)
+#endif
+ulong get_effective_memsize(void)
+{
+#ifndef        CONFIG_VERY_BIG_RAM
+       return gd->ram_size;
+#else
+       /* limit stack to what we can reasonable map */
+       return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
+                CONFIG_MAX_MEM_MAPPED : gd->ram_size);
+#endif
+}
+
 /************************************************************************
  *
  * This is the first part of the initialization sequence that is
@@ -376,7 +409,7 @@ void board_init_f (ulong bootflag)
        /* compiler optimization barrier needed for GCC >= 3.4 */
        __asm__ __volatile__("": : :"memory");
 
-#if !defined(CONFIG_CPM2)
+#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC83XX)
        /* Clear initial global data */
        memset ((void *) gd, 0, sizeof (gd_t));
 #endif
@@ -400,19 +433,15 @@ void board_init_f (ulong bootflag)
         */
        len = (ulong)&_end - CFG_MONITOR_BASE;
 
-#ifndef        CONFIG_VERY_BIG_RAM
-       addr = CFG_SDRAM_BASE + gd->ram_size;
-#else
-       /* only allow stack below 256M */
-       addr = CFG_SDRAM_BASE +
-              (gd->ram_size > 256 << 20) ? 256 << 20 : gd->ram_size;
-#endif
+       addr = CFG_SDRAM_BASE + get_effective_memsize();
 
 #ifdef CONFIG_LOGBUFFER
+#ifndef CONFIG_ALT_LB_ADDR
        /* reserve kernel log buffer */
        addr -= (LOGBUFF_RESERVE);
        debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
 #endif
+#endif
 
 #ifdef CONFIG_PRAM
        /*
@@ -552,6 +581,9 @@ void board_init_f (ulong bootflag)
        bd->bi_sccfreq = gd->scc_clk;
        bd->bi_vco     = gd->vco_out;
 #endif /* CONFIG_CPM2 */
+#if defined(CONFIG_MPC512X)
+       bd->bi_ipsfreq = gd->ips_clk;
+#endif /* CONFIG_MPC512X */
 #if defined(CONFIG_MPC5xxx)
        bd->bi_ipbfreq = gd->ipb_clk;
        bd->bi_pcifreq = gd->pci_clk;
@@ -564,7 +596,9 @@ void board_init_f (ulong bootflag)
 
        bd->bi_procfreq = gd->cpu_clk;  /* Processor Speed, In Hz */
        bd->bi_plb_busfreq = gd->bus_clk;
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
+    defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
        bd->bi_pci_busfreq = get_PCI_freq ();
        bd->bi_opbfreq = get_OPB_freq ();
 #elif defined(CONFIG_XILINX_ML300)
@@ -618,7 +652,13 @@ void board_init_r (gd_t *id, ulong dest_addr)
        bd = gd->bd;
 
        gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
+
+#if defined(CONFIG_RELOC_FIXUP_WORKS)
+       gd->reloc_off = 0;
+       mem_malloc_end = dest_addr;
+#else
        gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+#endif
 
 #ifdef CONFIG_SERIAL_MULTI
        serial_initialize();
@@ -777,7 +817,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
        spi_init_r ();
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
        WATCHDOG_RESET ();
        puts ("NAND:  ");
        nand_init();            /* go init the NAND */
@@ -818,9 +858,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif /* CONFIG_405GP, CONFIG_405EP */
 #endif /* CFG_EXTBDINFO */
 
-#if defined(CONFIG_SOLIDCARD3)
+#if defined(CONFIG_SC3)
        sc3_read_eeprom();
 #endif
+
+#ifdef CFG_ID_EEPROM
+       mac_read_from_eeprom();
+#endif
+
        s = getenv ("ethaddr");
 #if defined (CONFIG_MBX) || \
     defined (CONFIG_RPXCLASSIC) || \
@@ -888,13 +933,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
        }
 #endif
 
-#ifdef CFG_ID_EEPROM
-       mac_read_from_eeprom();
-#endif
-
 #if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
     defined(CONFIG_TQM8272) || \
-    defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
+    defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || \
+    defined(CONFIG_KUP4X) || defined(CONFIG_PCS440EP)
        load_sernum_ethaddr ();
 #endif
        /* IP Address */
@@ -916,6 +958,11 @@ void board_init_r (gd_t *id, ulong dest_addr)
        /* Initialize the jump table for applications */
        jumptable_init ();
 
+#if defined(CONFIG_API)
+       /* Initialize API */
+       api_init ();
+#endif
+
        /* Initialize the console (after the relocation and devices init) */
        console_init_r ();
 
@@ -927,7 +974,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
     defined(CONFIG_KUP4X)      || \
     defined(CONFIG_LWMON)      || \
     defined(CONFIG_PCU_E)      || \
-    defined(CONFIG_SOLIDCARD3) || \
+    defined(CONFIG_SC3)                || \
     defined(CONFIG_W7O)                || \
     defined(CONFIG_MISC_INIT_R)
        /* miscellaneous platform dependent initialisations */
@@ -939,7 +986,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
                hermes_start_lxt980 ((int) bd->bi_ethspeed);
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
        WATCHDOG_RESET ();
        puts ("KGDB:  ");
        kgdb_init ();
@@ -959,7 +1006,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
        serial_buffered_init();
 #endif
 
-#ifdef CONFIG_STATUS_LED
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
        status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
 #endif
 
@@ -971,27 +1018,27 @@ void board_init_r (gd_t *id, ulong dest_addr)
        if ((s = getenv ("loadaddr")) != NULL) {
                load_addr = simple_strtoul (s, NULL, 16);
        }
-#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
        if ((s = getenv ("bootfile")) != NULL) {
                copy_filename (BootFile, s, sizeof (BootFile));
        }
-#endif /* CFG_CMD_NET */
+#endif
 
        WATCHDOG_RESET ();
 
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
+#if defined(CONFIG_CMD_SCSI)
        WATCHDOG_RESET ();
        puts ("SCSI:  ");
        scsi_init ();
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#if defined(CONFIG_CMD_DOC)
        WATCHDOG_RESET ();
        puts ("DOC:   ");
        doc_init ();
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
 #if defined(CONFIG_NET_MULTI)
        WATCHDOG_RESET ();
        puts ("Net:   ");
@@ -999,7 +1046,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
        eth_initialize (bd);
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && ( \
+#if defined(CONFIG_CMD_NET) && ( \
     defined(CONFIG_CCM)                || \
     defined(CONFIG_ELPT860)    || \
     defined(CONFIG_EP8260)     || \
@@ -1024,13 +1071,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
        post_run (NULL, POST_RAM | post_bootmode_get(0));
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && !(CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_PCMCIA) \
+    && !defined(CONFIG_CMD_IDE)
        WATCHDOG_RESET ();
        puts ("PCMCIA:");
        pcmcia_init ();
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
        WATCHDOG_RESET ();
 # ifdef        CONFIG_IDE_8xx_PCCARD
        puts ("PCMCIA:");
@@ -1043,7 +1091,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #else
        ide_init ();
 #endif
-#endif /* CFG_CMD_IDE */
+#endif
 
 #ifdef CONFIG_LAST_STAGE_INIT
        WATCHDOG_RESET ();
@@ -1055,7 +1103,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
        last_stage_init ();
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
        WATCHDOG_RESET ();
        bedbug_init ();
 #endif
@@ -1080,8 +1128,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
                pram=0;
 #endif
 #ifdef CONFIG_LOGBUFFER
+#ifndef CONFIG_ALT_LB_ADDR
                /* Also take the logbuffer into account (pram is in kB) */
                pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
+#endif
 #endif
                sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
                setenv ("mem", (char *)memsz);
@@ -1114,9 +1164,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 void hang (void)
 {
        puts ("### ERROR ### Please RESET the board ###\n");
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
        show_boot_progress(-30);
-#endif
        for (;;);
 }