* MA 02111-1307 USA
*/
-#define DEBUG
#include <common.h>
#include <watchdog.h>
ep = image_get_ep (images->legacy_hdr_os);
#if defined(CONFIG_FIT)
} else if (images->fit_uname_os) {
- fit_unsupported_reset ("PPC linux bootm");
- goto error;
+ ret = fit_image_get_entry (images->fit_hdr_os,
+ images->fit_noffset_os, &ep);
+ if (ret) {
+ puts ("Can't get entry point property!\n");
+ goto error;
+ }
#endif
} else {
puts ("Could not find kernel entry point!\n");
* r6: NULL
* r7: NULL
*/
+ debug (" Booting using OF flat tree...\n");
(*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0);
/* does not return */
- }
+ } else
#endif
- /*
- * Linux Kernel Parameters (passing board info data):
- * r3: ptr to board info data
- * r4: initrd_start or 0 if no initrd
- * r5: initrd_end - unused if r4 is 0
- * r6: Start of command line string
- * r7: End of command line string
- */
- (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
- /* does not return */
+ {
+ /*
+ * Linux Kernel Parameters (passing board info data):
+ * r3: ptr to board info data
+ * r4: initrd_start or 0 if no initrd
+ * r5: initrd_end - unused if r4 is 0
+ * r6: Start of command line string
+ * r7: End of command line string
+ */
+ debug (" Booting using board info...\n");
+ (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
+ /* does not return */
+ }
return ;
error:
kbd->bi_cpmfreq /= 1000000L;
kbd->bi_brgfreq /= 1000000L;
kbd->bi_sccfreq /= 1000000L;
- kbd->bi_vco /= 1000000L;
+ kbd->bi_vco /= 1000000L;
#endif
#if defined(CONFIG_MPC5xxx)
kbd->bi_ipbfreq /= 1000000L;
return fdt_hdr;
}
+/**
+ * fit_check_fdt - verify FIT format FDT subimage
+ * @fit_hdr: pointer to the FIT header
+ * fdt_noffset: FDT subimage node offset within FIT image
+ * @verify: data CRC verification flag
+ *
+ * fit_check_fdt() verifies integrity of the FDT subimage and from
+ * specified FIT image.
+ *
+ * returns:
+ * 1, on success
+ * 0, on failure
+ */
+#if defined(CONFIG_FIT)
+static int fit_check_fdt (const void *fit, int fdt_noffset, int verify)
+{
+ fit_image_print (fit, fdt_noffset, " ");
+
+ if (verify) {
+ puts (" Verifying Hash Integrity ... ");
+ if (!fit_image_check_hashes (fit, fdt_noffset)) {
+ fdt_error ("Bad Data Hash");
+ return 0;
+ }
+ puts ("OK\n");
+ }
+
+ if (!fit_image_check_type (fit, fdt_noffset, IH_TYPE_FLATDT)) {
+ fdt_error ("Not a FDT image");
+ return 0;
+ }
+
+ if (!fit_image_check_comp (fit, fdt_noffset, IH_COMP_NONE)) {
+ fdt_error ("FDT image is compressed");
+ return 0;
+ }
+
+ return 1;
+}
+#endif /* CONFIG_FIT */
+
static int boot_get_fdt (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
bootm_headers_t *images, char **of_flat_tree, ulong *of_size)
{
ulong image_start, image_end;
ulong load_start, load_end;
#if defined(CONFIG_FIT)
- void *fit_hdr;
- const char *fit_uname_config = NULL;
- const char *fit_uname_fdt = NULL;
+ void *fit_hdr;
+ const char *fit_uname_config = NULL;
+ const char *fit_uname_fdt = NULL;
ulong default_addr;
+ int cfg_noffset;
+ int fdt_noffset;
+ const void *data;
+ size_t size;
#endif
- if (argc > 3) {
+ *of_flat_tree = NULL;
+ *of_size = 0;
+
+ if (argc > 3 || genimg_has_config (images)) {
#if defined(CONFIG_FIT)
- /*
- * If the FDT blob comes from the FIT image and the FIT image
- * address is omitted in the command line argument, try to use
- * ramdisk or os FIT image address or default load address.
- */
- if (images->fit_uname_rd)
- default_addr = (ulong)images->fit_hdr_rd;
- else if (images->fit_uname_os)
- default_addr = (ulong)images->fit_hdr_os;
- else
- default_addr = load_addr;
-
- if (fit_parse_conf (argv[3], default_addr,
- &fdt_addr, &fit_uname_config)) {
- debug ("* fdt: config '%s' from image at 0x%08lx\n",
- fit_uname_config, fdt_addr);
- } else if (fit_parse_subimage (argv[3], default_addr,
- &fdt_addr, &fit_uname_fdt)) {
- debug ("* fdt: subimage '%s' from image at 0x%08lx\n",
- fit_uname_fdt, fdt_addr);
- } else
+ if (argc > 3) {
+ /*
+ * If the FDT blob comes from the FIT image and the
+ * FIT image address is omitted in the command line
+ * argument, try to use ramdisk or os FIT image
+ * address or default load address.
+ */
+ if (images->fit_uname_rd)
+ default_addr = (ulong)images->fit_hdr_rd;
+ else if (images->fit_uname_os)
+ default_addr = (ulong)images->fit_hdr_os;
+ else
+ default_addr = load_addr;
+
+ if (fit_parse_conf (argv[3], default_addr,
+ &fdt_addr, &fit_uname_config)) {
+ debug ("* fdt: config '%s' from image at 0x%08lx\n",
+ fit_uname_config, fdt_addr);
+ } else if (fit_parse_subimage (argv[3], default_addr,
+ &fdt_addr, &fit_uname_fdt)) {
+ debug ("* fdt: subimage '%s' from image at 0x%08lx\n",
+ fit_uname_fdt, fdt_addr);
+ } else
#endif
- {
- fdt_addr = simple_strtoul(argv[3], NULL, 16);
- debug ("* fdt: cmdline image address = 0x%08lx\n",
- fdt_addr);
+ {
+ fdt_addr = simple_strtoul(argv[3], NULL, 16);
+ debug ("* fdt: cmdline image address = 0x%08lx\n",
+ fdt_addr);
+ }
+#if defined(CONFIG_FIT)
+ } else {
+ /* use FIT configuration provided in first bootm
+ * command argument
+ */
+ fdt_addr = (ulong)images->fit_hdr_os;
+ fit_uname_config = images->fit_uname_cfg;
+ debug ("* fdt: using config '%s' from image at 0x%08lx\n",
+ fit_uname_config, fdt_addr);
+
+ /*
+ * Check whether configuration has FDT blob defined,
+ * if not quit silently.
+ */
+ fit_hdr = (void *)fdt_addr;
+ cfg_noffset = fit_conf_get_node (fit_hdr,
+ fit_uname_config);
+ if (cfg_noffset < 0) {
+ debug ("* fdt: no such config\n");
+ return 0;
+ }
+
+ fdt_noffset = fit_conf_get_fdt_node (fit_hdr,
+ cfg_noffset);
+ if (fdt_noffset < 0) {
+ debug ("* fdt: no fdt in config\n");
+ return 0;
+ }
}
+#endif
- debug ("## Checking for 'FDT'/'FDT image' at %08lx\n",
+ debug ("## Checking for 'FDT'/'FDT Image' at %08lx\n",
fdt_addr);
/* copy from dataflash if needed */
*/
switch (genimg_get_format ((void *)fdt_addr)) {
case IMAGE_FORMAT_LEGACY:
- debug ("* fdt: legacy format image\n");
-
/* verify fdt_addr points to a valid image header */
- printf ("## Flattened Device Tree Legacy Image at %08lx\n",
+ printf ("## Flattened Device Tree from Legacy Image at %08lx\n",
fdt_addr);
fdt_hdr = image_get_fdt (fdt_addr);
if (!fdt_hdr)
fdt_error ("fdt overwritten");
goto error;
}
- memmove ((void *)image_get_load (fdt_hdr),
+
+ debug (" Loading FDT from 0x%08lx to 0x%08lx\n",
+ image_get_data (fdt_hdr), load_start);
+
+ memmove ((void *)load_start,
(void *)image_get_data (fdt_hdr),
image_get_data_size (fdt_hdr));
- fdt_blob = (char *)image_get_load (fdt_hdr);
+ fdt_blob = (char *)load_start;
break;
case IMAGE_FORMAT_FIT:
/*
*/
#if defined(CONFIG_FIT)
/* check FDT blob vs FIT blob */
- if (0) { /* FIXME: call FIT format verification */
+ if (fit_check_format ((const void *)fdt_addr)) {
/*
* FIT image
*/
fit_hdr = (void *)fdt_addr;
- debug ("* fdt: FIT format image\n");
- fit_unsupported_reset ("PPC fdt");
- goto error;
+ printf ("## Flattened Device Tree from FIT Image at %08lx\n",
+ fdt_addr);
+
+ if (!fit_uname_fdt) {
+ /*
+ * no FDT blob image node unit name,
+ * try to get config node first. If
+ * config unit node name is NULL
+ * fit_conf_get_node() will try to
+ * find default config node
+ */
+ cfg_noffset = fit_conf_get_node (fit_hdr,
+ fit_uname_config);
+
+ if (cfg_noffset < 0) {
+ fdt_error ("Could not find configuration node\n");
+ goto error;
+ }
+
+ fit_uname_config = fdt_get_name (fit_hdr,
+ cfg_noffset, NULL);
+ printf (" Using '%s' configuration\n",
+ fit_uname_config);
+
+ fdt_noffset = fit_conf_get_fdt_node (fit_hdr,
+ cfg_noffset);
+ fit_uname_fdt = fit_get_name (fit_hdr,
+ fdt_noffset, NULL);
+ } else {
+ /* get FDT component image node offset */
+ fdt_noffset = fit_image_get_node (fit_hdr,
+ fit_uname_fdt);
+ }
+ if (fdt_noffset < 0) {
+ fdt_error ("Could not find subimage node\n");
+ goto error;
+ }
+
+ printf (" Trying '%s' FDT blob subimage\n",
+ fit_uname_fdt);
+
+ if (!fit_check_fdt (fit_hdr, fdt_noffset,
+ images->verify))
+ goto error;
+
+ /* get ramdisk image data address and length */
+ if (fit_image_get_data (fit_hdr, fdt_noffset,
+ &data, &size)) {
+ fdt_error ("Could not find FDT subimage data");
+ goto error;
+ }
+
+ /* verift that image data is a proper FDT blob */
+ if (fdt_check_header ((char *)data) != 0) {
+ fdt_error ("Subimage data is not a FTD");
+ goto error;
+ }
+
+ /*
+ * move image data to the load address,
+ * make sure we don't overwrite initial image
+ */
+ image_start = (ulong)fit_hdr;
+ image_end = fit_get_end (fit_hdr);
+
+ if (fit_image_get_load (fit_hdr, fdt_noffset,
+ &load_start) == 0) {
+ load_end = load_start + size;
+
+ if ((load_start < image_end) &&
+ (load_end > image_start)) {
+ fdt_error ("FDT overwritten");
+ goto error;
+ }
+
+ printf (" Loading FDT from 0x%08lx to 0x%08lx\n",
+ (ulong)data, load_start);
+
+ memmove ((void *)load_start,
+ (void *)data, size);
+
+ fdt_blob = (char *)load_start;
+ } else {
+ fdt_blob = (char *)data;
+ }
+
+ images->fit_hdr_fdt = fit_hdr;
+ images->fit_uname_fdt = fit_uname_fdt;
+ images->fit_noffset_fdt = fdt_noffset;
+ break;
} else
#endif
{
}
} else {
debug ("## No Flattened Device Tree\n");
- *of_flat_tree = NULL;
- *of_size = 0;
return 0;
}
projects / u-boot / blobdiff