part_efi: document device-tree binding for part_efi configuration

[u-boot] / scripts / Makefile.spl

diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 3ba974226b8bc0fbdf4b68747367504a971c94f3..5370648e853d2d2e9d211069f2dc5d3e12f0f765 100644 (file)
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -35,6 +35,12 @@ else
 SPL_BIN := u-boot-spl
 endif
 
+ifdef CONFIG_SPL_BUILD
+SPL_ := SPL_
+else
+SPL_ :=
+endif
+
 include $(srctree)/config.mk
 include $(srctree)/arch/$(ARCH)/Makefile
 
@@ -54,12 +60,21 @@ libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
 
 libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
 libs-y += common/init/
+
+# Special handling for a few options which support SPL/TPL
+ifeq ($(CONFIG_TPL_BUILD),y)
+libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/
+libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/
+else
 libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/
+libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
+endif
+
 libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
 libs-y += drivers/
+libs-$(CONFIG_SPL_USB_GADGET_SUPPORT) += drivers/usb/dwc3/
 libs-y += dts/
 libs-y += fs/
-libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
 libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
 libs-$(CONFIG_SPL_NET_SUPPORT) += net/
 
@@ -110,9 +125,11 @@ LDPPFLAGS += \
        $(shell $(LD) --version | \
          sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 
+MKIMAGEOUTPUT ?= /dev/null
+
 quiet_cmd_mkimage = MKIMAGE $@
 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
-       $(if $(KBUILD_VERBOSE:1=), >/dev/null)
+       $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT))
 
 MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
 
@@ -134,17 +151,17 @@ boot.bin: $(obj)/u-boot-spl.bin FORCE
        $(call if_changed,mkimage)
 else
 ifdef CONFIG_ARCH_ZYNQ
-MKIMAGEFLAGS_boot.bin = -T zynqimage
+MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
 endif
 ifdef CONFIG_ARCH_ZYNQMP
-MKIMAGEFLAGS_boot.bin = -T zynqmpimage
+MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
 endif
 
 spl/boot.bin: $(obj)/u-boot-spl.bin FORCE
        $(call if_changed,mkimage)
 endif
 
-ALL-y  += $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).cfg
+ALL-y  += $(obj)/$(SPL_BIN).bin
 
 ifdef CONFIG_SAMSUNG
 ALL-y  += $(obj)/$(BOARD)-spl.bin
@@ -154,7 +171,7 @@ ifdef CONFIG_ARCH_SOCFPGA
 ALL-y  += $(obj)/$(SPL_BIN).sfp
 endif
 
-ifdef CONFIG_SUNXI
+ifdef CONFIG_ARCH_SUNXI
 ALL-y  += $(obj)/sunxi-spl.bin
 endif
 
@@ -162,6 +179,8 @@ ifeq ($(CONFIG_SYS_SOC),"at91")
 ALL-y  += boot.bin
 endif
 
+ALL-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-16bit-spl.bin
+
 ALL-$(CONFIG_ARCH_ZYNQ)                += $(obj)/boot.bin
 ALL-$(CONFIG_ARCH_ZYNQMP)      += $(obj)/boot.bin
 
@@ -174,7 +193,8 @@ quiet_cmd_copy = COPY    $@
       cmd_copy = cp $< $@
 
 ifeq ($(CONFIG_SPL_OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),yy)
-$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin $(obj)/$(SPL_BIN)-pad.bin \
+$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \
+               $(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
                $(obj)/$(SPL_BIN).dtb FORCE
        $(call if_changed,cat)
 
@@ -195,8 +215,13 @@ $(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN)
 # 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second
 # pass removes various unused properties from the remaining nodes.
 # The output is typically a much smaller device tree file.
+ifeq ($(CONFIG_TPL_BUILD),y)
+fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-tpl
+else
+fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-spl
+endif
 quiet_cmd_fdtgrep = FDTGREP $@
-      cmd_fdtgrep = $(objtree)/tools/fdtgrep -b u-boot,dm-pre-reloc -RT $< \
+      cmd_fdtgrep = $(objtree)/tools/fdtgrep $(fdtgrep_props) -RT $< \
                -n /chosen -O dtb | \
        $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
                $(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
@@ -204,13 +229,6 @@ quiet_cmd_fdtgrep = FDTGREP $@
 $(obj)/$(SPL_BIN).dtb: dts/dt.dtb $(objtree)/tools/fdtgrep FORCE
        $(call if_changed,fdtgrep)
 
-quiet_cmd_cpp_cfg = CFG     $@
-cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
-       -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
-
-$(obj)/$(SPL_BIN).cfg: include/config.h FORCE
-       $(call if_changed,cpp_cfg)
-
 pythonpath = PYTHONPATH=tools
 
 quiet_cmd_dtocc = DTOC C  $@
@@ -252,11 +270,16 @@ endif
 quiet_cmd_objcopy = OBJCOPY $@
 cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 
-OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary
+OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \
+               $(if $(CONFIG_SPL_X86_16BIT_INIT),-R .start16 -R .resetvec)
 
 $(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE
        $(call if_changed,objcopy)
 
+OBJCOPYFLAGS_u-boot-x86-16bit-spl.bin := -O binary -j .start16 -j .resetvec
+$(obj)/u-boot-x86-16bit-spl.bin: $(obj)/u-boot-spl FORCE
+       $(call if_changed,objcopy)
+
 LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
 ifneq ($(CONFIG_SPL_TEXT_BASE),)
 LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)