/* */
/* */
/* */
-/* (C) 2001-2006 Ullrich von Bassewitz */
-/* Römerstraße 52 */
-/* D-70794 Filderstadt */
-/* EMail: uz@cc65.org */
+/* (C) 2001-2010, Ullrich von Bassewitz */
+/* Roemerstrasse 52 */
+/* D-70794 Filderstadt */
+/* EMail: uz@cc65.org */
/* */
/* */
/* This software is provided 'as-is', without any expressed or implied */
#include "cpu.h"
#include "print.h"
#include "xmalloc.h"
+#include "xsprintf.h"
/* cc65 */
#include "asmlabel.h"
#include "coptcmp.h"
#include "coptind.h"
#include "coptneg.h"
+#include "coptptrload.h"
#include "coptpush.h"
#include "coptsize.h"
#include "coptstop.h"
static unsigned OptShift1 (CodeSeg* S)
/* A call to the shlaxN routine may get replaced by one or more asl insns
- * if the value of X is not used later.
+ * if the value of X is not used later. If X is used later, but it is zero
+ * on entry and it's a shift by one, it may get replaced by:
+ *
+ * asl a
+ * bcc L1
+ * inx
+ * L1:
+ *
*/
{
unsigned Changes = 0;
+ unsigned I;
+
+ /* Generate register info */
+ CS_GenRegInfo (S);
/* Walk over the entries */
- unsigned I = 0;
+ I = 0;
while (I < CS_GetEntryCount (S)) {
+ CodeEntry* N;
+ CodeEntry* X;
+ CodeLabel* L;
+
/* Get next entry */
CodeEntry* E = CS_GetEntry (S, I);
(strncmp (E->Arg, "shlax", 5) == 0 ||
strncmp (E->Arg, "aslax", 5) == 0) &&
strlen (E->Arg) == 6 &&
- IsDigit (E->Arg[5]) &&
- !RegXUsed (S, I+1)) {
+ IsDigit (E->Arg[5])) {
- /* Insert shift insns */
- unsigned Count = E->Arg[5] - '0';
- while (Count--) {
- CodeEntry* X = NewCodeEntry (OP65_ASL, AM65_ACC, "a", 0, E->LI);
- CS_InsertEntry (S, X, I+1);
- }
+ if (!RegXUsed (S, I+1)) {
- /* Delete the call to shlax */
- CS_DelEntry (S, I);
+ /* Insert shift insns */
+ unsigned Count = E->Arg[5] - '0';
+ while (Count--) {
+ X = NewCodeEntry (OP65_ASL, AM65_ACC, "a", 0, E->LI);
+ CS_InsertEntry (S, X, I+1);
+ }
- /* Remember, we had changes */
- ++Changes;
+ /* Delete the call to shlax */
+ CS_DelEntry (S, I);
+
+ /* Remember, we had changes */
+ ++Changes;
+
+ } else if (E->RI->In.RegX == 0 &&
+ E->Arg[5] == '1' &&
+ (N = CS_GetNextEntry (S, I)) != 0) {
+
+ /* asl a */
+ X = NewCodeEntry (OP65_ASL, AM65_ACC, "a", 0, E->LI);
+ CS_InsertEntry (S, X, I+1);
+
+ /* bcc L1 */
+ L = CS_GenLabel (S, N);
+ X = NewCodeEntry (OP65_BCC, AM65_BRA, L->Name, L, E->LI);
+ CS_InsertEntry (S, X, I+2);
+
+ /* inx */
+ X = NewCodeEntry (OP65_INX, AM65_IMP, 0, 0, E->LI);
+ CS_InsertEntry (S, X, I+3);
+
+ /* Delete the call to shlax */
+ CS_DelEntry (S, I);
+
+ /* Remember, we had changes */
+ ++Changes;
+ }
}
}
+ /* Free the register info */
+ CS_FreeRegInfo (S);
+
/* Return the number of changes made */
return Changes;
}
CS_InsertEntry (S, X, I+1);
}
- /* Delete the call to shlax */
+ /* Delete the call to shrax */
CS_DelEntry (S, I);
/* Remember, we had changes */
+static unsigned OptShift4 (CodeSeg* S)
+/* Inline the shift subroutines. */
+{
+ unsigned Changes = 0;
+
+ /* Walk over the entries */
+ unsigned I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ CodeEntry* X;
+ unsigned IP;
+
+ /* Get next entry */
+ CodeEntry* E = CS_GetEntry (S, I);
+
+ /* Check for a call to one of the shift routine */
+ if (E->OPC == OP65_JSR &&
+ (strncmp (E->Arg, "shlax", 5) == 0 ||
+ strncmp (E->Arg, "aslax", 5) == 0) &&
+ strlen (E->Arg) == 6 &&
+ IsDigit (E->Arg[5])) {
+
+ /* Get number of shifts */
+ unsigned ShiftCount = (E->Arg[5] - '0');
+
+ /* Code is:
+ *
+ * stx tmp1
+ * asl a
+ * rol tmp1
+ * (repeat ShiftCount-1 times)
+ * ldx tmp1
+ *
+ * which makes 4 + 3 * ShiftCount bytes, compared to the original
+ * 3 bytes for the subroutine call. However, in most cases, the
+ * final load of the X register gets merged with some other insn
+ * and replaces a txa, so for a shift count of 1, we get a factor
+ * of 200, which matches nicely the CodeSizeFactor enabled with -Oi
+ */
+ if (ShiftCount > 1 || S->CodeSizeFactor > 200) {
+ unsigned Size = 4 + 3 * ShiftCount;
+ if ((Size * 100 / 3) > S->CodeSizeFactor) {
+ /* Not acceptable */
+ goto NextEntry;
+ }
+ }
+
+ /* Inline the code. Insertion point is behind the subroutine call */
+ IP = (I + 1);
+
+ /* stx tmp1 */
+ X = NewCodeEntry (OP65_STX, AM65_ZP, "tmp1", 0, E->LI);
+ CS_InsertEntry (S, X, IP++);
+
+ while (ShiftCount--) {
+ /* asl a */
+ X = NewCodeEntry (OP65_ASL, AM65_ACC, "a", 0, E->LI);
+ CS_InsertEntry (S, X, IP++);
+
+ /* rol tmp1 */
+ X = NewCodeEntry (OP65_ROL, AM65_ZP, "tmp1", 0, E->LI);
+ CS_InsertEntry (S, X, IP++);
+ }
+
+ /* ldx tmp1 */
+ X = NewCodeEntry (OP65_LDX, AM65_ZP, "tmp1", 0, E->LI);
+ CS_InsertEntry (S, X, IP++);
+
+ /* Remove the subroutine call */
+ CS_DelEntry (S, I);
+
+ /* Remember, we had changes */
+ ++Changes;
+ }
+
+NextEntry:
+ /* Next entry */
+ ++I;
+
+ }
+
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
/*****************************************************************************/
/* Optimize loads */
/*****************************************************************************/
+static unsigned OptLoad2 (CodeSeg* S)
+/* Replace calls to ldaxysp by inline code */
+{
+ unsigned I;
+ unsigned Changes = 0;
+
+ /* Walk over the entries */
+ I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ CodeEntry* E;
+
+ /* Get next entry */
+ E = CS_GetEntry (S, I);
+
+ /* Check for the sequence */
+ if (CE_IsCallTo (E, "ldaxysp")) {
+
+ CodeEntry* X;
+
+ /* lda (sp),y */
+ X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, "sp", 0, E->LI);
+ CS_InsertEntry (S, X, I+1);
+
+ /* tax */
+ X = NewCodeEntry (OP65_TAX, AM65_IMP, 0, 0, E->LI);
+ CS_InsertEntry (S, X, I+2);
+
+ /* dey */
+ X = NewCodeEntry (OP65_DEY, AM65_IMP, 0, 0, E->LI);
+ CS_InsertEntry (S, X, I+3);
+
+ /* lda (sp),y */
+ X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, "sp", 0, E->LI);
+ CS_InsertEntry (S, X, I+4);
+
+ /* Now remove the call to the subroutine */
+ CS_DelEntry (S, I);
+
+ /* Remember, we had changes */
+ ++Changes;
+
+ }
+
+ /* Next entry */
+ ++I;
+ }
+
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
/*****************************************************************************/
/* Optimize stores through pointers */
/*****************************************************************************/
/* Ok, found. Use the name of the register bank */
RegBank = ZPLoc = P[0]->Arg;
}
- }
- }
-
- /* Insert the load via the zp pointer */
- X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[3]->LI);
- CS_InsertEntry (S, X, I+3);
- X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, ZPLoc, 0, L[2]->LI);
- CS_InsertEntry (S, X, I+4);
-
- /* Insert the store through the zp pointer */
- X = NewCodeEntry (OP65_STA, AM65_ZP_INDY, ZPLoc, 0, L[3]->LI);
- CS_InsertEntry (S, X, I+6+K);
-
- /* Delete the old code */
- CS_DelEntry (S, I+7+K); /* jsr spaspidx */
- CS_DelEntry (S, I+2); /* jsr ldauidx */
-
- /* Create and insert the stores into the zp pointer if needed */
- if (RegBank == 0) {
- X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+1);
- X = NewCodeEntry (OP65_STX, AM65_ZP, "ptr1+1", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+2);
- }
-
- /* Delete more old code. Do it here to keep a label attached to
- * entry I in place.
- */
- CS_DelEntry (S, I); /* jsr pushax */
-
- /* Remember, we had changes */
- ++Changes;
-
- }
-
- /* Next entry */
- ++I;
-
- }
-
- /* Return the number of changes made */
- return Changes;
-}
-
-
-
-static unsigned OptPtrStore2 (CodeSeg* S)
-/* Search for the sequence:
- *
- * lda #<(label+0)
- * ldx #>(label+0)
- * clc
- * adc xxx
- * bcc L
- * inx
- * L: jsr pushax
- * ldx #$00
- * lda yyy
- * ldy #$00
- * jsr staspidx
- *
- * and replace it by:
- *
- * ldy xxx
- * ldx #$00
- * lda yyy
- * sta label,y
- */
-{
- unsigned Changes = 0;
-
- /* Walk over the entries */
- unsigned I = 0;
- while (I < CS_GetEntryCount (S)) {
-
- CodeEntry* L[11];
- unsigned Len;
-
- /* Get next entry */
- L[0] = CS_GetEntry (S, I);
-
- /* Check for the sequence */
- if (L[0]->OPC == OP65_LDA &&
- L[0]->AM == AM65_IMM &&
- CS_GetEntries (S, L+1, I+1, 10) &&
- L[1]->OPC == OP65_LDX &&
- L[1]->AM == AM65_IMM &&
- L[2]->OPC == OP65_CLC &&
- L[3]->OPC == OP65_ADC &&
- (L[3]->AM == AM65_ABS || L[3]->AM == AM65_ZP) &&
- (L[4]->OPC == OP65_BCC || L[4]->OPC == OP65_JCC) &&
- L[4]->JumpTo != 0 &&
- L[4]->JumpTo->Owner == L[6] &&
- L[5]->OPC == OP65_INX &&
- CE_IsCallTo (L[6], "pushax") &&
- L[7]->OPC == OP65_LDX &&
- L[8]->OPC == OP65_LDA &&
- L[9]->OPC == OP65_LDY &&
- CE_IsKnownImm (L[9], 0) &&
- CE_IsCallTo (L[10], "staspidx") &&
- !CS_RangeHasLabel (S, I+1, 5) &&
- !CS_RangeHasLabel (S, I+7, 4) &&
- /* Check the label last because this is quite costly */
- (Len = strlen (L[0]->Arg)) > 3 &&
- L[0]->Arg[0] == '<' &&
- L[0]->Arg[1] == '(' &&
- strlen (L[1]->Arg) == Len &&
- L[1]->Arg[0] == '>' &&
- memcmp (L[0]->Arg+1, L[1]->Arg+1, Len-1) == 0) {
-
- CodeEntry* X;
- char* Label;
-
- /* We will create all the new stuff behind the current one so
- * we keep the line references.
- */
- X = NewCodeEntry (OP65_LDY, L[3]->AM, L[3]->Arg, 0, L[0]->LI);
- CS_InsertEntry (S, X, I+11);
-
- X = NewCodeEntry (OP65_LDX, L[7]->AM, L[7]->Arg, 0, L[7]->LI);
- CS_InsertEntry (S, X, I+12);
-
- X = NewCodeEntry (OP65_LDA, L[8]->AM, L[8]->Arg, 0, L[8]->LI);
- CS_InsertEntry (S, X, I+13);
-
- Label = memcpy (xmalloc (Len-2), L[0]->Arg+2, Len-3);
- Label[Len-3] = '\0';
- X = NewCodeEntry (OP65_STA, AM65_ABSY, Label, 0, L[10]->LI);
- CS_InsertEntry (S, X, I+14);
- xfree (Label);
-
- /* Remove the old code */
- CS_DelEntries (S, I, 11);
-
- /* Remember, we had changes */
- ++Changes;
-
- }
-
- /* Next entry */
- ++I;
-
- }
-
- /* Return the number of changes made */
- return Changes;
-}
-
-
-
-/*****************************************************************************/
-/* Optimize loads through pointers */
-/*****************************************************************************/
-
-
-
-static unsigned OptPtrLoad1 (CodeSeg* S)
-/* Search for the sequence:
- *
- * clc
- * adc xxx
- * tay
- * txa
- * adc yyy
- * tax
- * tya
- * ldy
- * jsr ldauidx
- *
- * and replace it by:
- *
- * clc
- * adc xxx
- * sta ptr1
- * txa
- * adc yyy
- * sta ptr1+1
- * ldy
- * ldx #$00
- * lda (ptr1),y
- */
-{
- unsigned Changes = 0;
-
- /* Walk over the entries */
- unsigned I = 0;
- while (I < CS_GetEntryCount (S)) {
-
- CodeEntry* L[9];
-
- /* Get next entry */
- L[0] = CS_GetEntry (S, I);
-
- /* Check for the sequence */
- if (L[0]->OPC == OP65_CLC &&
- CS_GetEntries (S, L+1, I+1, 8) &&
- L[1]->OPC == OP65_ADC &&
- L[2]->OPC == OP65_TAY &&
- L[3]->OPC == OP65_TXA &&
- L[4]->OPC == OP65_ADC &&
- L[5]->OPC == OP65_TAX &&
- L[6]->OPC == OP65_TYA &&
- L[7]->OPC == OP65_LDY &&
- CE_IsCallTo (L[8], "ldauidx") &&
- !CS_RangeHasLabel (S, I+1, 8)) {
-
- CodeEntry* X;
- CodeEntry* P;
-
- /* Track the insertion point */
- unsigned IP = I+2;
-
- /* sta ptr1 */
- X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1", 0, L[2]->LI);
- CS_InsertEntry (S, X, IP++);
-
- /* If the instruction before the clc is a ldx, replace the
- * txa by an lda with the same location of the ldx. Otherwise
- * transfer the value in X to A.
- */
- if ((P = CS_GetPrevEntry (S, I)) != 0 &&
- P->OPC == OP65_LDX &&
- !CE_HasLabel (P)) {
- X = NewCodeEntry (OP65_LDA, P->AM, P->Arg, 0, P->LI);
- } else {
- X = NewCodeEntry (OP65_TXA, AM65_IMP, 0, 0, L[3]->LI);
- }
- CS_InsertEntry (S, X, IP++);
-
- /* adc yyy */
- X = NewCodeEntry (OP65_ADC, L[4]->AM, L[4]->Arg, 0, L[4]->LI);
- CS_InsertEntry (S, X, IP++);
-
- /* sta ptr1+1 */
- X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1+1", 0, L[5]->LI);
- CS_InsertEntry (S, X, IP++);
-
- /* ldy ... */
- X = NewCodeEntry (OP65_LDY, L[7]->AM, L[7]->Arg, 0, L[7]->LI);
- CS_InsertEntry (S, X, IP++);
-
- /* ldx #$00 */
- X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[8]->LI);
- CS_InsertEntry (S, X, IP++);
-
- /* lda (ptr1),y */
- X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, "ptr1", 0, L[8]->LI);
- CS_InsertEntry (S, X, IP++);
-
- /* Remove the old instructions */
- CS_DelEntries (S, IP, 7);
-
- /* Remember, we had changes */
- ++Changes;
-
- }
-
- /* Next entry */
- ++I;
-
- }
-
- /* Return the number of changes made */
- return Changes;
-}
-
-
-
-static unsigned OptPtrLoad2 (CodeSeg* S)
-/* Search for the sequence:
- *
- * adc xxx
- * pha
- * txa
- * iny
- * adc yyy
- * tax
- * pla
- * ldy
- * jsr ldauidx
- *
- * and replace it by:
- *
- * adc xxx
- * sta ptr1
- * txa
- * iny
- * adc yyy
- * sta ptr1+1
- * ldy
- * ldx #$00
- * lda (ptr1),y
- */
-{
- unsigned Changes = 0;
-
- /* Walk over the entries */
- unsigned I = 0;
- while (I < CS_GetEntryCount (S)) {
-
- CodeEntry* L[9];
-
- /* Get next entry */
- L[0] = CS_GetEntry (S, I);
-
- /* Check for the sequence */
- if (L[0]->OPC == OP65_ADC &&
- CS_GetEntries (S, L+1, I+1, 8) &&
- L[1]->OPC == OP65_PHA &&
- L[2]->OPC == OP65_TXA &&
- L[3]->OPC == OP65_INY &&
- L[4]->OPC == OP65_ADC &&
- L[5]->OPC == OP65_TAX &&
- L[6]->OPC == OP65_PLA &&
- L[7]->OPC == OP65_LDY &&
- CE_IsCallTo (L[8], "ldauidx") &&
- !CS_RangeHasLabel (S, I+1, 8)) {
-
- CodeEntry* X;
-
- /* Store the low byte and remove the PHA instead */
- X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+1);
-
- /* Store the high byte */
- X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1+1", 0, L[4]->LI);
- CS_InsertEntry (S, X, I+6);
-
- /* Load high and low byte */
- X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[6]->LI);
- CS_InsertEntry (S, X, I+10);
- X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, "ptr1", 0, L[6]->LI);
- CS_InsertEntry (S, X, I+11);
-
- /* Delete the old code */
- CS_DelEntry (S, I+12); /* jsr ldauidx */
- CS_DelEntry (S, I+8); /* pla */
- CS_DelEntry (S, I+7); /* tax */
- CS_DelEntry (S, I+2); /* pha */
-
- /* Remember, we had changes */
- ++Changes;
-
- }
-
- /* Next entry */
- ++I;
-
- }
-
- /* Return the number of changes made */
- return Changes;
-}
-
-
-
-static unsigned OptPtrLoad3 (CodeSeg* S)
-/* Search for the sequence:
- *
- * lda #<(label+0)
- * ldx #>(label+0)
- * clc
- * adc xxx
- * bcc L
- * inx
- * L: ldy #$00
- * jsr ldauidx
- *
- * and replace it by:
- *
- * ldy xxx
- * ldx #$00
- * lda label,y
- */
-{
- unsigned Changes = 0;
-
- /* Walk over the entries */
- unsigned I = 0;
- while (I < CS_GetEntryCount (S)) {
-
- CodeEntry* L[8];
- unsigned Len;
-
- /* Get next entry */
- L[0] = CS_GetEntry (S, I);
-
- /* Check for the sequence */
- if (L[0]->OPC == OP65_LDA &&
- L[0]->AM == AM65_IMM &&
- CS_GetEntries (S, L+1, I+1, 7) &&
- L[1]->OPC == OP65_LDX &&
- L[1]->AM == AM65_IMM &&
- L[2]->OPC == OP65_CLC &&
- L[3]->OPC == OP65_ADC &&
- (L[3]->AM == AM65_ABS || L[3]->AM == AM65_ZP) &&
- (L[4]->OPC == OP65_BCC || L[4]->OPC == OP65_JCC) &&
- L[4]->JumpTo != 0 &&
- L[4]->JumpTo->Owner == L[6] &&
- L[5]->OPC == OP65_INX &&
- L[6]->OPC == OP65_LDY &&
- CE_IsKnownImm (L[6], 0) &&
- CE_IsCallTo (L[7], "ldauidx") &&
- !CS_RangeHasLabel (S, I+1, 5) &&
- !CE_HasLabel (L[7]) &&
- /* Check the label last because this is quite costly */
- (Len = strlen (L[0]->Arg)) > 3 &&
- L[0]->Arg[0] == '<' &&
- L[0]->Arg[1] == '(' &&
- strlen (L[1]->Arg) == Len &&
- L[1]->Arg[0] == '>' &&
- memcmp (L[0]->Arg+1, L[1]->Arg+1, Len-1) == 0) {
-
- CodeEntry* X;
- char* Label;
-
- /* We will create all the new stuff behind the current one so
- * we keep the line references.
- */
- X = NewCodeEntry (OP65_LDY, L[3]->AM, L[3]->Arg, 0, L[0]->LI);
- CS_InsertEntry (S, X, I+8);
-
- X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+9);
-
- Label = memcpy (xmalloc (Len-2), L[0]->Arg+2, Len-3);
- Label[Len-3] = '\0';
- X = NewCodeEntry (OP65_LDA, AM65_ABSY, Label, 0, L[0]->LI);
- CS_InsertEntry (S, X, I+10);
- xfree (Label);
-
- /* Remove the old code */
- CS_DelEntries (S, I, 8);
-
- /* Remember, we had changes */
- ++Changes;
-
- }
-
- /* Next entry */
- ++I;
-
- }
-
- /* Return the number of changes made */
- return Changes;
-}
-
-
-
-static unsigned OptPtrLoad4 (CodeSeg* S)
-/* Search for the sequence:
- *
- * lda #<(label+0)
- * ldx #>(label+0)
- * ldy #$xx
- * clc
- * adc (sp),y
- * bcc L
- * inx
- * L: ldy #$00
- * jsr ldauidx
- *
- * and replace it by:
- *
- * ldy #$xx
- * lda (sp),y
- * tay
- * ldx #$00
- * lda label,y
- */
-{
- unsigned Changes = 0;
-
- /* Walk over the entries */
- unsigned I = 0;
- while (I < CS_GetEntryCount (S)) {
-
- CodeEntry* L[9];
- unsigned Len;
-
- /* Get next entry */
- L[0] = CS_GetEntry (S, I);
-
- /* Check for the sequence */
- if (L[0]->OPC == OP65_LDA &&
- L[0]->AM == AM65_IMM &&
- CS_GetEntries (S, L+1, I+1, 8) &&
- L[1]->OPC == OP65_LDX &&
- L[1]->AM == AM65_IMM &&
- !CE_HasLabel (L[1]) &&
- L[2]->OPC == OP65_LDY &&
- CE_IsConstImm (L[2]) &&
- !CE_HasLabel (L[2]) &&
- L[3]->OPC == OP65_CLC &&
- !CE_HasLabel (L[3]) &&
- L[4]->OPC == OP65_ADC &&
- L[4]->AM == AM65_ZP_INDY &&
- !CE_HasLabel (L[4]) &&
- (L[5]->OPC == OP65_BCC || L[5]->OPC == OP65_JCC) &&
- L[5]->JumpTo != 0 &&
- L[5]->JumpTo->Owner == L[7] &&
- !CE_HasLabel (L[5]) &&
- L[6]->OPC == OP65_INX &&
- !CE_HasLabel (L[6]) &&
- L[7]->OPC == OP65_LDY &&
- CE_IsKnownImm (L[7], 0) &&
- CE_IsCallTo (L[8], "ldauidx") &&
- !CE_HasLabel (L[8]) &&
- /* Check the label last because this is quite costly */
- (Len = strlen (L[0]->Arg)) > 3 &&
- L[0]->Arg[0] == '<' &&
- L[0]->Arg[1] == '(' &&
- strlen (L[1]->Arg) == Len &&
- L[1]->Arg[0] == '>' &&
- memcmp (L[0]->Arg+1, L[1]->Arg+1, Len-1) == 0) {
-
- CodeEntry* X;
- char* Label;
-
- /* Add the lda */
- X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, L[4]->Arg, 0, L[0]->LI);
- CS_InsertEntry (S, X, I+3);
-
- /* Add the tay */
- X = NewCodeEntry (OP65_TAY, AM65_IMP, 0, 0, L[0]->LI);
- CS_InsertEntry (S, X, I+4);
-
- /* Add the ldx */
- X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+5);
-
- /* Add the lda */
- Label = memcpy (xmalloc (Len-2), L[0]->Arg+2, Len-3);
- Label[Len-3] = '\0';
- X = NewCodeEntry (OP65_LDA, AM65_ABSY, Label, 0, L[0]->LI);
- CS_InsertEntry (S, X, I+6);
- xfree (Label);
-
- /* Remove the old code */
- CS_DelEntries (S, I, 2);
- CS_DelEntries (S, I+5, 6);
-
- /* Remember, we had changes */
- ++Changes;
-
- }
-
- /* Next entry */
- ++I;
-
- }
-
- /* Return the number of changes made */
- return Changes;
-}
-
-
-
-static unsigned OptPtrLoad5 (CodeSeg* S)
-/* Search for the sequence:
- *
- * clc
- * adc xxx
- * bcc L
- * inx
- * L: ldy #$00
- * jsr ldauidx
- *
- * and replace it by:
- *
- * ldy xxx
- * sta ptr1
- * stx ptr1+1
- * ldx #$00
- * lda (ptr1),y
- */
-{
- unsigned Changes = 0;
-
- /* Walk over the entries */
- unsigned I = 0;
- while (I < CS_GetEntryCount (S)) {
-
- CodeEntry* L[6];
-
- /* Get next entry */
- L[0] = CS_GetEntry (S, I);
-
- /* Check for the sequence */
- if (L[0]->OPC == OP65_CLC &&
- CS_GetEntries (S, L+1, I+1, 5) &&
- L[1]->OPC == OP65_ADC &&
- (L[1]->AM == AM65_ABS || L[1]->AM == AM65_ZP || L[1]->AM == AM65_IMM) &&
- (L[2]->OPC == OP65_BCC || L[2]->OPC == OP65_JCC) &&
- L[2]->JumpTo != 0 &&
- L[2]->JumpTo->Owner == L[4] &&
- L[3]->OPC == OP65_INX &&
- L[4]->OPC == OP65_LDY &&
- CE_IsKnownImm (L[4], 0) &&
- CE_IsCallTo (L[5], "ldauidx") &&
- !CS_RangeHasLabel (S, I+1, 3) &&
- !CE_HasLabel (L[5])) {
-
- CodeEntry* X;
-
- /* We will create all the new stuff behind the current one so
- * we keep the line references.
- */
- X = NewCodeEntry (OP65_LDY, L[1]->AM, L[1]->Arg, 0, L[0]->LI);
- CS_InsertEntry (S, X, I+6);
-
- /* sta ptr1 */
- X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+7);
-
- /* stx ptr1+1 */
- X = NewCodeEntry (OP65_STX, AM65_ZP, "ptr1+1", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+8);
-
- /* ldx #$00 */
- X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+9);
-
- X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, "ptr1", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+10);
-
- /* Remove the old code */
- CS_DelEntries (S, I, 6);
-
- /* Remember, we had changes */
- ++Changes;
-
- }
-
- /* Next entry */
- ++I;
-
- }
-
- /* Return the number of changes made */
- return Changes;
-}
-
-
-
-static unsigned OptPtrLoad6 (CodeSeg* S)
-/* Search for the sequence:
- *
- * lda regbank+n
- * ldx regbank+n+1
- * sta regsave
- * stx regsave+1
- * clc
- * adc #$01
- * bcc L0005
- * inx
- * L: sta regbank+n
- * stx regbank+n+1
- * lda regsave
- * ldx regsave+1
- * ldy #$00
- * jsr ldauidx
- *
- * and replace it by:
- *
- * ldy #$00
- * ldx #$00
- * lda (regbank+n),y
- * inc regbank+n
- * bne L1
- * inc regbank+n+1
- * L1: tay <- only if flags are used
- *
- * This function must execute before OptPtrLoad7!
- *
- */
-{
- unsigned Changes = 0;
-
- /* Walk over the entries */
- unsigned I = 0;
- while (I < CS_GetEntryCount (S)) {
-
- CodeEntry* L[15];
- unsigned Len;
-
- /* Get next entry */
- L[0] = CS_GetEntry (S, I);
-
- /* Check for the sequence */
- if (L[0]->OPC == OP65_LDA &&
- L[0]->AM == AM65_ZP &&
- strncmp (L[0]->Arg, "regbank+", 8) == 0 &&
- (Len = strlen (L[0]->Arg)) > 0 &&
- CS_GetEntries (S, L+1, I+1, 14) &&
- !CS_RangeHasLabel (S, I+1, 7) &&
- !CS_RangeHasLabel (S, I+9, 5) &&
- L[1]->OPC == OP65_LDX &&
- L[1]->AM == AM65_ZP &&
- strncmp (L[1]->Arg, L[0]->Arg, Len) == 0 &&
- strcmp (L[1]->Arg+Len, "+1") == 0 &&
- L[2]->OPC == OP65_STA &&
- L[2]->AM == AM65_ZP &&
- strcmp (L[2]->Arg, "regsave") == 0 &&
- L[3]->OPC == OP65_STX &&
- L[3]->AM == AM65_ZP &&
- strcmp (L[3]->Arg, "regsave+1") == 0 &&
- L[4]->OPC == OP65_CLC &&
- L[5]->OPC == OP65_ADC &&
- CE_IsKnownImm (L[5], 1) &&
- L[6]->OPC == OP65_BCC &&
- L[6]->JumpTo != 0 &&
- L[6]->JumpTo->Owner == L[8] &&
- L[7]->OPC == OP65_INX &&
- L[8]->OPC == OP65_STA &&
- L[8]->AM == AM65_ZP &&
- strcmp (L[8]->Arg, L[0]->Arg) == 0 &&
- L[9]->OPC == OP65_STX &&
- L[9]->AM == AM65_ZP &&
- strcmp (L[9]->Arg, L[1]->Arg) == 0 &&
- L[10]->OPC == OP65_LDA &&
- L[10]->AM == AM65_ZP &&
- strcmp (L[10]->Arg, "regsave") == 0 &&
- L[11]->OPC == OP65_LDX &&
- L[11]->AM == AM65_ZP &&
- strcmp (L[11]->Arg, "regsave+1") == 0 &&
- L[12]->OPC == OP65_LDY &&
- CE_IsConstImm (L[12]) &&
- CE_IsCallTo (L[13], "ldauidx")) {
-
- CodeEntry* X;
- CodeLabel* Label;
-
- /* Check if the instruction following the sequence uses the flags
- * set by the load. If so, insert a test of the value in the
- * accumulator.
- */
- if (CE_UseLoadFlags (L[14])) {
- X = NewCodeEntry (OP65_TAY, AM65_IMP, 0, 0, L[13]->LI);
- CS_InsertEntry (S, X, I+14);
- }
-
- /* Attach a label to L[14]. This may be either the just inserted
- * instruction, or the one following the sequence.
- */
- Label = CS_GenLabel (S, L[14]);
-
- /* ldy #$xx */
- X = NewCodeEntry (OP65_LDY, AM65_IMM, L[12]->Arg, 0, L[12]->LI);
- CS_InsertEntry (S, X, I+14);
-
- /* ldx #$xx */
- X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[13]->LI);
- CS_InsertEntry (S, X, I+15);
-
- /* lda (regbank+n),y */
- X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, L[0]->Arg, 0, L[13]->LI);
- CS_InsertEntry (S, X, I+16);
-
- /* inc regbank+n */
- X = NewCodeEntry (OP65_INC, AM65_ZP, L[0]->Arg, 0, L[5]->LI);
- CS_InsertEntry (S, X, I+17);
-
- /* bne ... */
- X = NewCodeEntry (OP65_BNE, AM65_BRA, Label->Name, Label, L[6]->LI);
- CS_InsertEntry (S, X, I+18);
-
- /* inc regbank+n+1 */
- X = NewCodeEntry (OP65_INC, AM65_ZP, L[1]->Arg, 0, L[7]->LI);
- CS_InsertEntry (S, X, I+19);
-
- /* Delete the old code */
- CS_DelEntries (S, I, 14);
-
- /* Remember, we had changes */
- ++Changes;
-
- }
-
- /* Next entry */
- ++I;
-
- }
-
- /* Return the number of changes made */
- return Changes;
-}
-
-
-
-static unsigned OptPtrLoad7 (CodeSeg* S)
-/* Search for the sequence:
- *
- * lda zp
- * ldx zp+1
- * ldy xx
- * jsr ldauidx
- *
- * and replace it by:
- *
- * ldy xx
- * ldx #$00
- * lda (zp),y
- */
-{
- unsigned Changes = 0;
-
- /* Walk over the entries */
- unsigned I = 0;
- while (I < CS_GetEntryCount (S)) {
-
- CodeEntry* L[4];
- unsigned Len;
-
- /* Get next entry */
- L[0] = CS_GetEntry (S, I);
-
- /* Check for the sequence */
- if (L[0]->OPC == OP65_LDA && L[0]->AM == AM65_ZP &&
- CS_GetEntries (S, L+1, I+1, 3) &&
- !CS_RangeHasLabel (S, I+1, 3) &&
- L[1]->OPC == OP65_LDX && L[1]->AM == AM65_ZP &&
- (Len = strlen (L[0]->Arg)) > 0 &&
- strncmp (L[0]->Arg, L[1]->Arg, Len) == 0 &&
- strcmp (L[1]->Arg + Len, "+1") == 0 &&
- L[2]->OPC == OP65_LDY &&
- CE_IsCallTo (L[3], "ldauidx")) {
-
- CodeEntry* X;
-
- /* ldx #$00 */
- X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[3]->LI);
- CS_InsertEntry (S, X, I+3);
-
- /* lda (zp),y */
- X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, L[0]->Arg, 0, L[3]->LI);
- CS_InsertEntry (S, X, I+4);
-
- /* Remove the old code */
- CS_DelEntry (S, I+5);
- CS_DelEntries (S, I, 2);
-
- /* Remember, we had changes */
- ++Changes;
-
- }
-
- /* Next entry */
- ++I;
-
- }
-
- /* Return the number of changes made */
- return Changes;
-}
-
-
-
-static unsigned OptPtrLoad8 (CodeSeg* S)
-/* Search for the sequence:
- *
- * lda zp
- * ldx zp+1
- * (anything that doesn't change a/x)
- * ldy xx
- * jsr ldauidx
- *
- * and replace it by:
- *
- * lda zp
- * ldx zp+1
- * (anything that doesn't change a/x)
- * ldy xx
- * ldx #$00
- * lda (zp),y
- *
- * Must execute before OptPtrLoad10!
- */
-{
- unsigned Changes = 0;
- unsigned I;
-
- /* Generate register info */
- CS_GenRegInfo (S);
-
- /* Walk over the entries */
- I = 0;
- while (I < CS_GetEntryCount (S)) {
-
- CodeEntry* L[5];
- unsigned Len;
-
- /* Get next entry */
- L[0] = CS_GetEntry (S, I);
-
- /* Check for the sequence */
- if (L[0]->OPC == OP65_LDA && L[0]->AM == AM65_ZP &&
- CS_GetEntries (S, L+1, I+1, 4) &&
- !CS_RangeHasLabel (S, I+1, 4) &&
- L[1]->OPC == OP65_LDX && L[1]->AM == AM65_ZP &&
- (Len = strlen (L[0]->Arg)) > 0 &&
- strncmp (L[0]->Arg, L[1]->Arg, Len) == 0 &&
- strcmp (L[1]->Arg + Len, "+1") == 0 &&
- (L[2]->Chg & REG_AX) == 0 &&
- L[3]->OPC == OP65_LDY &&
- CE_IsCallTo (L[4], "ldauidx")) {
-
- CodeEntry* X;
+ }
+ }
- /* ldx #$00 */
+ /* Insert the load via the zp pointer */
X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[3]->LI);
- CS_InsertEntry (S, X, I+5);
+ CS_InsertEntry (S, X, I+3);
+ X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, ZPLoc, 0, L[2]->LI);
+ CS_InsertEntry (S, X, I+4);
- /* lda (zp),y */
- X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, L[0]->Arg, 0, L[3]->LI);
- CS_InsertEntry (S, X, I+6);
+ /* Insert the store through the zp pointer */
+ X = NewCodeEntry (OP65_STA, AM65_ZP_INDY, ZPLoc, 0, L[3]->LI);
+ CS_InsertEntry (S, X, I+6+K);
- /* Remove the old code */
- CS_DelEntry (S, I+4);
+ /* Delete the old code */
+ CS_DelEntry (S, I+7+K); /* jsr spaspidx */
+ CS_DelEntry (S, I+2); /* jsr ldauidx */
- /* Remember, we had changes */
- ++Changes;
+ /* Create and insert the stores into the zp pointer if needed */
+ if (RegBank == 0) {
+ X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+1);
+ X = NewCodeEntry (OP65_STX, AM65_ZP, "ptr1+1", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+2);
+ }
- }
+ /* Delete more old code. Do it here to keep a label attached to
+ * entry I in place.
+ */
+ CS_DelEntry (S, I); /* jsr pushax */
- /* Next entry */
- ++I;
+ /* Remember, we had changes */
+ ++Changes;
- }
+ }
- /* Free the register info */
- CS_FreeRegInfo (S);
+ /* Next entry */
+ ++I;
+
+ }
/* Return the number of changes made */
return Changes;
-static unsigned OptPtrLoad9 (CodeSeg* S)
+static unsigned OptPtrStore2 (CodeSeg* S)
/* Search for the sequence:
*
- * lda zp
- * ldx zp+1
- * ldy xx
- * jsr ldaxidx
+ * lda #<(label+0)
+ * ldx #>(label+0)
+ * clc
+ * adc xxx
+ * bcc L
+ * inx
+ * L: jsr pushax
+ * ldx #$00
+ * lda yyy
+ * ldy #$00
+ * jsr staspidx
*
* and replace it by:
*
- * ldy xx
- * lda (zp),y
- * tax
- * dey
- * lda (zp),y
+ * ldy xxx
+ * ldx #$00
+ * lda yyy
+ * sta label,y
*/
{
unsigned Changes = 0;
unsigned I = 0;
while (I < CS_GetEntryCount (S)) {
- CodeEntry* L[4];
+ CodeEntry* L[11];
unsigned Len;
/* Get next entry */
L[0] = CS_GetEntry (S, I);
/* Check for the sequence */
- if (L[0]->OPC == OP65_LDA && L[0]->AM == AM65_ZP &&
- CS_GetEntries (S, L+1, I+1, 3) &&
- !CS_RangeHasLabel (S, I+1, 3) &&
- L[1]->OPC == OP65_LDX && L[1]->AM == AM65_ZP &&
- (Len = strlen (L[0]->Arg)) > 0 &&
- strncmp (L[0]->Arg, L[1]->Arg, Len) == 0 &&
- strcmp (L[1]->Arg + Len, "+1") == 0 &&
- L[2]->OPC == OP65_LDY &&
- CE_IsCallTo (L[3], "ldaxidx")) {
+ if (L[0]->OPC == OP65_LDA &&
+ L[0]->AM == AM65_IMM &&
+ CS_GetEntries (S, L+1, I+1, 10) &&
+ L[1]->OPC == OP65_LDX &&
+ L[1]->AM == AM65_IMM &&
+ L[2]->OPC == OP65_CLC &&
+ L[3]->OPC == OP65_ADC &&
+ (L[3]->AM == AM65_ABS || L[3]->AM == AM65_ZP) &&
+ (L[4]->OPC == OP65_BCC || L[4]->OPC == OP65_JCC) &&
+ L[4]->JumpTo != 0 &&
+ L[4]->JumpTo->Owner == L[6] &&
+ L[5]->OPC == OP65_INX &&
+ CE_IsCallTo (L[6], "pushax") &&
+ L[7]->OPC == OP65_LDX &&
+ L[8]->OPC == OP65_LDA &&
+ L[9]->OPC == OP65_LDY &&
+ CE_IsKnownImm (L[9], 0) &&
+ CE_IsCallTo (L[10], "staspidx") &&
+ !CS_RangeHasLabel (S, I+1, 5) &&
+ !CS_RangeHasLabel (S, I+7, 4) &&
+ /* Check the label last because this is quite costly */
+ (Len = strlen (L[0]->Arg)) > 3 &&
+ L[0]->Arg[0] == '<' &&
+ L[0]->Arg[1] == '(' &&
+ strlen (L[1]->Arg) == Len &&
+ L[1]->Arg[0] == '>' &&
+ memcmp (L[0]->Arg+1, L[1]->Arg+1, Len-1) == 0) {
CodeEntry* X;
+ char* Label;
- /* lda (zp),y */
- X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, L[0]->Arg, 0, L[3]->LI);
- CS_InsertEntry (S, X, I+4);
+ /* We will create all the new stuff behind the current one so
+ * we keep the line references.
+ */
+ X = NewCodeEntry (OP65_LDY, L[3]->AM, L[3]->Arg, 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+11);
- /* tax */
- X = NewCodeEntry (OP65_TAX, AM65_IMP, 0, 0, L[3]->LI);
- CS_InsertEntry (S, X, I+5);
+ X = NewCodeEntry (OP65_LDX, L[7]->AM, L[7]->Arg, 0, L[7]->LI);
+ CS_InsertEntry (S, X, I+12);
- /* dey */
- X = NewCodeEntry (OP65_DEY, AM65_IMP, 0, 0, L[3]->LI);
- CS_InsertEntry (S, X, I+6);
+ X = NewCodeEntry (OP65_LDA, L[8]->AM, L[8]->Arg, 0, L[8]->LI);
+ CS_InsertEntry (S, X, I+13);
- /* lda (zp),y */
- X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, L[0]->Arg, 0, L[3]->LI);
- CS_InsertEntry (S, X, I+7);
+ Label = memcpy (xmalloc (Len-2), L[0]->Arg+2, Len-3);
+ Label[Len-3] = '\0';
+ X = NewCodeEntry (OP65_STA, AM65_ABSY, Label, 0, L[10]->LI);
+ CS_InsertEntry (S, X, I+14);
+ xfree (Label);
/* Remove the old code */
- CS_DelEntry (S, I+3);
- CS_DelEntries (S, I, 2);
+ CS_DelEntries (S, I, 11);
/* Remember, we had changes */
++Changes;
-static unsigned OptPtrLoad10 (CodeSeg* S)
-/* Search for the sequence
+static unsigned OptPtrStore3 (CodeSeg* S)
+/* Search for the sequence:
*
- * ldy ...
- * jsr ldauidx
+ * lda #<(label+0)
+ * ldx #>(label+0)
+ * ldy aaa
+ * clc
+ * adc (sp),y
+ * bcc L
+ * inx
+ * L: jsr pushax
+ * ldx #$00
+ * lda yyy
+ * ldy #$00
+ * jsr staspidx
*
* and replace it by:
*
- * ldy ...
- * stx ptr1+1
- * sta ptr1
- * ldx #$00
- * lda (ptr1),y
- *
- * This step must be executed *after* OptPtrLoad1!
+ * ldy aaa
+ * ldx #$00
+ * lda (sp),y
+ * tay
+ * lda yyy
+ * sta label,y
*/
{
unsigned Changes = 0;
unsigned I = 0;
while (I < CS_GetEntryCount (S)) {
- CodeEntry* L[2];
+ CodeEntry* L[12];
+ unsigned Len;
/* Get next entry */
L[0] = CS_GetEntry (S, I);
/* Check for the sequence */
- if (L[0]->OPC == OP65_LDY &&
- CS_GetEntries (S, L+1, I+1, 1) &&
- CE_IsCallTo (L[1], "ldauidx") &&
- !CE_HasLabel (L[1])) {
+ if (L[0]->OPC == OP65_LDA &&
+ L[0]->AM == AM65_IMM &&
+ CS_GetEntries (S, L+1, I+1, 11) &&
+ L[1]->OPC == OP65_LDX &&
+ L[1]->AM == AM65_IMM &&
+ L[2]->OPC == OP65_LDY &&
+ L[3]->OPC == OP65_CLC &&
+ L[4]->OPC == OP65_ADC &&
+ L[4]->AM == AM65_ZP_INDY &&
+ strcmp (L[4]->Arg, "sp") == 0 &&
+ (L[5]->OPC == OP65_BCC || L[5]->OPC == OP65_JCC) &&
+ L[5]->JumpTo != 0 &&
+ L[5]->JumpTo->Owner == L[7] &&
+ L[6]->OPC == OP65_INX &&
+ CE_IsCallTo (L[7], "pushax") &&
+ L[8]->OPC == OP65_LDX &&
+ L[9]->OPC == OP65_LDA &&
+ L[10]->OPC == OP65_LDY &&
+ CE_IsKnownImm (L[10], 0) &&
+ CE_IsCallTo (L[11], "staspidx") &&
+ !CS_RangeHasLabel (S, I+1, 6) &&
+ !CS_RangeHasLabel (S, I+8, 4) &&
+ /* Check the label last because this is quite costly */
+ (Len = strlen (L[0]->Arg)) > 3 &&
+ L[0]->Arg[0] == '<' &&
+ L[0]->Arg[1] == '(' &&
+ strlen (L[1]->Arg) == Len &&
+ L[1]->Arg[0] == '>' &&
+ memcmp (L[0]->Arg+1, L[1]->Arg+1, Len-1) == 0) {
+
+ CodeEntry* X;
+ char* Label;
- CodeEntry* X;
+ /* We will create all the new stuff behind the current one so
+ * we keep the line references.
+ */
+ X = NewCodeEntry (OP65_LDY, L[2]->AM, L[2]->Arg, 0, L[2]->LI);
+ CS_InsertEntry (S, X, I+12);
- /* Store the high byte */
- X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+1);
+ X = NewCodeEntry (OP65_LDX, L[8]->AM, L[8]->Arg, 0, L[8]->LI);
+ CS_InsertEntry (S, X, I+13);
- /* Store the low byte */
- X = NewCodeEntry (OP65_STX, AM65_ZP, "ptr1+1", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+2);
+ X = NewCodeEntry (OP65_LDA, L[4]->AM, L[4]->Arg, 0, L[4]->LI);
+ CS_InsertEntry (S, X, I+14);
- /* Delete the call to ldauidx */
- CS_DelEntry (S, I+3);
+ X = NewCodeEntry (OP65_TAY, AM65_IMP, 0, 0, L[4]->LI);
+ CS_InsertEntry (S, X, I+15);
- /* Load the high and low byte */
- X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+3);
- X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, "ptr1", 0, L[0]->LI);
- CS_InsertEntry (S, X, I+4);
+ X = NewCodeEntry (OP65_LDA, L[9]->AM, L[9]->Arg, 0, L[9]->LI);
+ CS_InsertEntry (S, X, I+16);
+
+ Label = memcpy (xmalloc (Len-2), L[0]->Arg+2, Len-3);
+ Label[Len-3] = '\0';
+ X = NewCodeEntry (OP65_STA, AM65_ABSY, Label, 0, L[11]->LI);
+ CS_InsertEntry (S, X, I+17);
+ xfree (Label);
+
+ /* Remove the old code */
+ CS_DelEntries (S, I, 12);
/* Remember, we had changes */
++Changes;
case REG_PTR1_LO:
Arg = MakeHexArg (In->Ptr1Lo);
- X = NewCodeEntry (OP65_LDA, AM65_IMM, Arg, 0, E->LI);
+ X = NewCodeEntry (OP65_LDA, AM65_IMM, Arg, 0, E->LI);
break;
case REG_PTR1_HI:
case OP65_TYA:
if (E->RI->In.RegY >= 0) {
- Arg = MakeHexArg (In->RegY);
+ Arg = MakeHexArg (In->RegY);
X = NewCodeEntry (OP65_LDA, AM65_IMM, Arg, 0, E->LI);
}
break;
+/*****************************************************************************/
+/* Optimize stack pointer ops */
+/*****************************************************************************/
+
+
+
+static unsigned IsDecSP (const CodeEntry* E)
+/* Check if this is an insn that decrements the stack pointer. If so, return
+ * the decrement. If not, return zero.
+ * The function expects E to be a subroutine call.
+ */
+{
+ if (strncmp (E->Arg, "decsp", 5) == 0) {
+ if (E->Arg[5] >= '1' && E->Arg[5] <= '8') {
+ return (E->Arg[5] - '0');
+ }
+ } else if (strcmp (E->Arg, "subysp") == 0 && RegValIsKnown (E->RI->In.RegY)) {
+ return E->RI->In.RegY;
+ }
+
+ /* If we come here, it's not a decsp op */
+ return 0;
+}
+
+
+
+static unsigned OptStackPtrOps (CodeSeg* S)
+/* Merge adjacent calls to decsp into one. NOTE: This function won't merge all
+ * known cases!
+ */
+{
+ unsigned Changes = 0;
+ unsigned I;
+
+ /* Generate register info for the following step */
+ CS_GenRegInfo (S);
+
+ /* Walk over the entries */
+ I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ unsigned Dec1;
+ unsigned Dec2;
+ const CodeEntry* N;
+
+ /* Get the next entry */
+ const CodeEntry* E = CS_GetEntry (S, I);
+
+ /* Check for decspn or subysp */
+ if (E->OPC == OP65_JSR &&
+ (Dec1 = IsDecSP (E)) > 0 &&
+ (N = CS_GetNextEntry (S, I)) != 0 &&
+ (Dec2 = IsDecSP (N)) > 0 &&
+ (Dec1 += Dec2) <= 255 &&
+ !CE_HasLabel (N)) {
+
+ CodeEntry* X;
+ char Buf[20];
+
+ /* We can combine the two */
+ if (Dec1 <= 8) {
+ /* Insert a call to decsp */
+ xsprintf (Buf, sizeof (Buf), "decsp%u", Dec1);
+ X = NewCodeEntry (OP65_JSR, AM65_ABS, Buf, 0, N->LI);
+ CS_InsertEntry (S, X, I+2);
+ } else {
+ /* Insert a call to subysp */
+ const char* Arg = MakeHexArg (Dec1);
+ X = NewCodeEntry (OP65_LDY, AM65_IMM, Arg, 0, N->LI);
+ CS_InsertEntry (S, X, I+2);
+ X = NewCodeEntry (OP65_JSR, AM65_ABS, "subysp", 0, N->LI);
+ CS_InsertEntry (S, X, I+3);
+ }
+
+ /* Delete the old code */
+ CS_DelEntries (S, I, 2);
+
+ /* Regenerate register info */
+ CS_GenRegInfo (S);
+
+ /* Remember we had changes */
+ ++Changes;
+
+ } else {
+
+ /* Next entry */
+ ++I;
+ }
+
+ }
+
+ /* Free register info */
+ CS_FreeRegInfo (S);
+
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
/*****************************************************************************/
/* struct OptFunc */
/*****************************************************************************/
static OptFunc DOptCmp6 = { OptCmp6, "OptCmp6", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptCmp7 = { OptCmp7, "OptCmp7", 85, 0, 0, 0, 0, 0 };
static OptFunc DOptCmp8 = { OptCmp8, "OptCmp8", 50, 0, 0, 0, 0, 0 };
-static OptFunc DOptCondBranches = { OptCondBranches, "OptCondBranches", 80, 0, 0, 0, 0, 0 };
+static OptFunc DOptCmp9 = { OptCmp9, "OptCmp9", 85, 0, 0, 0, 0, 0 };
+static OptFunc DOptCondBranches1= { OptCondBranches1,"OptCondBranches1", 80, 0, 0, 0, 0, 0 };
+static OptFunc DOptCondBranches2= { OptCondBranches2,"OptCondBranches2", 0, 0, 0, 0, 0, 0 };
static OptFunc DOptDeadCode = { OptDeadCode, "OptDeadCode", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptDeadJumps = { OptDeadJumps, "OptDeadJumps", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptDecouple = { OptDecouple, "OptDecouple", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptDupLoads = { OptDupLoads, "OptDupLoads", 0, 0, 0, 0, 0, 0 };
+static OptFunc DOptIndLoads1 = { OptIndLoads1, "OptIndLoads1", 0, 0, 0, 0, 0, 0 };
+static OptFunc DOptIndLoads2 = { OptIndLoads2, "OptIndLoads2", 0, 0, 0, 0, 0, 0 };
static OptFunc DOptJumpCascades = { OptJumpCascades, "OptJumpCascades", 100, 0, 0, 0, 0, 0 };
-static OptFunc DOptJumpTarget = { OptJumpTarget, "OptJumpTarget", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptJumpTarget1 = { OptJumpTarget1, "OptJumpTarget1", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptJumpTarget2 = { OptJumpTarget2, "OptJumpTarget2", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptJumpTarget3 = { OptJumpTarget3, "OptJumpTarget3", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptLoad1 = { OptLoad1, "OptLoad1", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptLoad2 = { OptLoad2, "OptLoad2", 200, 0, 0, 0, 0, 0 };
static OptFunc DOptRTS = { OptRTS, "OptRTS", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptRTSJumps1 = { OptRTSJumps1, "OptRTSJumps1", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptRTSJumps2 = { OptRTSJumps2, "OptRTSJumps2", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptPtrLoad2 = { OptPtrLoad2, "OptPtrLoad2", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptPtrLoad3 = { OptPtrLoad3, "OptPtrLoad3", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptPtrLoad4 = { OptPtrLoad4, "OptPtrLoad4", 100, 0, 0, 0, 0, 0 };
-static OptFunc DOptPtrLoad5 = { OptPtrLoad5, "OptPtrLoad5", 92, 0, 0, 0, 0, 0 };
-static OptFunc DOptPtrLoad6 = { OptPtrLoad6, "OptPtrLoad6", 50, 0, 0, 0, 0, 0 };
-static OptFunc DOptPtrLoad7 = { OptPtrLoad7, "OptPtrLoad7", 65, 0, 0, 0, 0, 0 };
-static OptFunc DOptPtrLoad8 = { OptPtrLoad8, "OptPtrLoad8", 108, 0, 0, 0, 0, 0 };
-static OptFunc DOptPtrLoad9 = { OptPtrLoad9, "OptPtrLoad9", 86, 0, 0, 0, 0, 0 };
-static OptFunc DOptPtrLoad10 = { OptPtrLoad10, "OptPtrLoad10", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad5 = { OptPtrLoad5, "OptPtrLoad5", 50, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad6 = { OptPtrLoad6, "OptPtrLoad6", 60, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad7 = { OptPtrLoad7, "OptPtrLoad7", 140, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad11 = { OptPtrLoad11, "OptPtrLoad11", 92, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad12 = { OptPtrLoad12, "OptPtrLoad12", 50, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad13 = { OptPtrLoad13, "OptPtrLoad13", 65, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad14 = { OptPtrLoad14, "OptPtrLoad14", 108, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad15 = { OptPtrLoad15, "OptPtrLoad15", 86, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad16 = { OptPtrLoad16, "OptPtrLoad16", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad17 = { OptPtrLoad17, "OptPtrLoad17", 190, 0, 0, 0, 0, 0 };
static OptFunc DOptPtrStore1 = { OptPtrStore1, "OptPtrStore1", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptPtrStore2 = { OptPtrStore2, "OptPtrStore2", 40, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrStore3 = { OptPtrStore3, "OptPtrStore3", 50, 0, 0, 0, 0, 0 };
static OptFunc DOptPush1 = { OptPush1, "OptPush1", 65, 0, 0, 0, 0, 0 };
static OptFunc DOptPush2 = { OptPush2, "OptPush2", 50, 0, 0, 0, 0, 0 };
static OptFunc DOptPushPop = { OptPushPop, "OptPushPop", 0, 0, 0, 0, 0, 0 };
static OptFunc DOptShift1 = { OptShift1, "OptShift1", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptShift2 = { OptShift2, "OptShift2", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptShift3 = { OptShift3, "OptShift3", 110, 0, 0, 0, 0, 0 };
+static OptFunc DOptShift4 = { OptShift4, "OptShift4", 200, 0, 0, 0, 0, 0 };
static OptFunc DOptSize1 = { OptSize1, "OptSize1", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptSize2 = { OptSize2, "OptSize2", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptStackOps = { OptStackOps, "OptStackOps", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptStackPtrOps = { OptStackPtrOps, "OptStackPtrOps", 50, 0, 0, 0, 0, 0 };
static OptFunc DOptStore1 = { OptStore1, "OptStore1", 70, 0, 0, 0, 0, 0 };
-static OptFunc DOptStore2 = { OptStore2, "OptStore2", 220, 0, 0, 0, 0, 0 };
+static OptFunc DOptStore2 = { OptStore2, "OptStore2", 115, 0, 0, 0, 0, 0 };
static OptFunc DOptStore3 = { OptStore3, "OptStore3", 120, 0, 0, 0, 0, 0 };
static OptFunc DOptStore4 = { OptStore4, "OptStore4", 50, 0, 0, 0, 0, 0 };
static OptFunc DOptStore5 = { OptStore5, "OptStore5", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptSub1 = { OptSub1, "OptSub1", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptSub2 = { OptSub2, "OptSub2", 100, 0, 0, 0, 0, 0 };
static OptFunc DOptSub3 = { OptSub3, "OptSub3", 100, 0, 0, 0, 0, 0 };
-static OptFunc DOptTest1 = { OptTest1, "OptTest1", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptTest1 = { OptTest1, "OptTest1", 65, 0, 0, 0, 0, 0 };
+static OptFunc DOptTest2 = { OptTest2, "OptTest2", 50, 0, 0, 0, 0, 0 };
static OptFunc DOptTransfers1 = { OptTransfers1, "OptTransfers1", 0, 0, 0, 0, 0, 0 };
static OptFunc DOptTransfers2 = { OptTransfers2, "OptTransfers2", 60, 0, 0, 0, 0, 0 };
+static OptFunc DOptTransfers3 = { OptTransfers3, "OptTransfers3", 65, 0, 0, 0, 0, 0 };
+static OptFunc DOptTransfers4 = { OptTransfers4, "OptTransfers4", 65, 0, 0, 0, 0, 0 };
static OptFunc DOptUnusedLoads = { OptUnusedLoads, "OptUnusedLoads", 0, 0, 0, 0, 0, 0 };
static OptFunc DOptUnusedStores = { OptUnusedStores, "OptUnusedStores", 0, 0, 0, 0, 0, 0 };
&DOptCmp6,
&DOptCmp7,
&DOptCmp8,
- &DOptCondBranches,
+ &DOptCmp9,
+ &DOptCondBranches1,
+ &DOptCondBranches2,
&DOptDeadCode,
&DOptDeadJumps,
&DOptDecouple,
&DOptDupLoads,
+ &DOptIndLoads1,
+ &DOptIndLoads2,
&DOptJumpCascades,
- &DOptJumpTarget,
+ &DOptJumpTarget1,
+ &DOptJumpTarget2,
+ &DOptJumpTarget3,
&DOptLoad1,
+ &DOptLoad2,
&DOptNegA1,
&DOptNegA2,
&DOptNegAX1,
&DOptNegAX4,
&DOptPrecalc,
&DOptPtrLoad1,
- &DOptPtrLoad10,
+ &DOptPtrLoad11,
+ &DOptPtrLoad12,
+ &DOptPtrLoad13,
+ &DOptPtrLoad14,
+ &DOptPtrLoad15,
+ &DOptPtrLoad16,
+ &DOptPtrLoad17,
&DOptPtrLoad2,
&DOptPtrLoad3,
&DOptPtrLoad4,
&DOptPtrLoad5,
&DOptPtrLoad6,
&DOptPtrLoad7,
- &DOptPtrLoad8,
- &DOptPtrLoad9,
&DOptPtrStore1,
&DOptPtrStore2,
+ &DOptPtrStore3,
&DOptPush1,
&DOptPush2,
&DOptPushPop,
&DOptShift1,
&DOptShift2,
&DOptShift3,
+ &DOptShift4,
&DOptSize1,
&DOptSize2,
&DOptStackOps,
+ &DOptStackPtrOps,
&DOptStore1,
&DOptStore2,
&DOptStore3,
&DOptSub2,
&DOptSub3,
&DOptTest1,
+ &DOptTest2,
&DOptTransfers1,
&DOptTransfers2,
+ &DOptTransfers3,
+ &DOptTransfers4,
&DOptUnusedLoads,
&DOptUnusedStores,
};
{
unsigned Changes = 0;
+ Changes += RunOptFunc (S, &DOptStackPtrOps, 5);
Changes += RunOptFunc (S, &DOptPtrStore1, 1);
Changes += RunOptFunc (S, &DOptPtrStore2, 1);
+ Changes += RunOptFunc (S, &DOptPtrStore3, 1);
Changes += RunOptFunc (S, &DOptAdd3, 1); /* Before OptPtrLoad5! */
Changes += RunOptFunc (S, &DOptPtrLoad1, 1);
Changes += RunOptFunc (S, &DOptPtrLoad2, 1);
Changes += RunOptFunc (S, &DOptPtrLoad5, 1);
Changes += RunOptFunc (S, &DOptPtrLoad6, 1);
Changes += RunOptFunc (S, &DOptPtrLoad7, 1);
- Changes += RunOptFunc (S, &DOptPtrLoad8, 1);
- Changes += RunOptFunc (S, &DOptPtrLoad9, 1);
+ Changes += RunOptFunc (S, &DOptPtrLoad11, 1);
+ Changes += RunOptFunc (S, &DOptPtrLoad12, 1);
+ Changes += RunOptFunc (S, &DOptPtrLoad13, 1);
+ Changes += RunOptFunc (S, &DOptPtrLoad14, 1);
+ Changes += RunOptFunc (S, &DOptPtrLoad15, 1);
+ Changes += RunOptFunc (S, &DOptPtrLoad16, 1);
+ Changes += RunOptFunc (S, &DOptPtrLoad17, 1);
Changes += RunOptFunc (S, &DOptNegAX1, 1);
Changes += RunOptFunc (S, &DOptNegAX2, 1);
Changes += RunOptFunc (S, &DOptNegAX3, 1);
Changes += RunOptFunc (S, &DOptAdd1, 1);
Changes += RunOptFunc (S, &DOptAdd2, 1);
Changes += RunOptFunc (S, &DOptAdd4, 1);
+ Changes += RunOptFunc (S, &DOptAdd5, 1);
+ Changes += RunOptFunc (S, &DOptAdd6, 1);
+ Changes += RunOptFunc (S, &DOptAdd6, 1);
+ Changes += RunOptFunc (S, &DOptSub1, 1);
+ Changes += RunOptFunc (S, &DOptSub3, 1);
Changes += RunOptFunc (S, &DOptStore4, 1);
Changes += RunOptFunc (S, &DOptStore5, 1);
Changes += RunOptFunc (S, &DOptShift1, 1);
Changes += RunOptFunc (S, &DOptShift2, 1);
Changes += RunOptFunc (S, &DOptShift3, 1);
+ Changes += RunOptFunc (S, &DOptShift4, 1);
Changes += RunOptFunc (S, &DOptStore1, 1);
Changes += RunOptFunc (S, &DOptStore2, 5);
Changes += RunOptFunc (S, &DOptStore3, 5);
do {
C = 0;
- C += RunOptFunc (S, &DOptPtrLoad10, 1);
C += RunOptFunc (S, &DOptNegA1, 1);
C += RunOptFunc (S, &DOptNegA2, 1);
+ C += RunOptFunc (S, &DOptStackOps, 1);
C += RunOptFunc (S, &DOptSub1, 1);
C += RunOptFunc (S, &DOptSub2, 1);
C += RunOptFunc (S, &DOptSub3, 1);
C += RunOptFunc (S, &DOptAdd5, 1);
C += RunOptFunc (S, &DOptAdd6, 1);
- C += RunOptFunc (S, &DOptStackOps, 1);
C += RunOptFunc (S, &DOptJumpCascades, 1);
C += RunOptFunc (S, &DOptDeadJumps, 1);
C += RunOptFunc (S, &DOptRTS, 1);
C += RunOptFunc (S, &DOptDeadCode, 1);
- C += RunOptFunc (S, &DOptJumpTarget, 1);
- C += RunOptFunc (S, &DOptCondBranches, 1);
- C += RunOptFunc (S, &DOptRTSJumps1, 1);
C += RunOptFunc (S, &DOptBoolTrans, 1);
+ C += RunOptFunc (S, &DOptJumpTarget1, 1);
+ C += RunOptFunc (S, &DOptJumpTarget2, 1);
+ C += RunOptFunc (S, &DOptCondBranches1, 1);
+ C += RunOptFunc (S, &DOptCondBranches2, 1);
+ C += RunOptFunc (S, &DOptRTSJumps1, 1);
C += RunOptFunc (S, &DOptCmp1, 1);
C += RunOptFunc (S, &DOptCmp2, 1);
C += RunOptFunc (S, &DOptCmp3, 1);
C += RunOptFunc (S, &DOptCmp6, 1);
C += RunOptFunc (S, &DOptCmp7, 1);
C += RunOptFunc (S, &DOptCmp8, 1);
+ C += RunOptFunc (S, &DOptCmp9, 1);
C += RunOptFunc (S, &DOptTest1, 1);
C += RunOptFunc (S, &DOptLoad1, 1);
+ C += RunOptFunc (S, &DOptJumpTarget3, 1); /* After OptCondBranches2 */
C += RunOptFunc (S, &DOptUnusedLoads, 1);
C += RunOptFunc (S, &DOptUnusedStores, 1);
C += RunOptFunc (S, &DOptDupLoads, 1);
C += RunOptFunc (S, &DOptStoreLoad, 1);
C += RunOptFunc (S, &DOptTransfers1, 1);
+ C += RunOptFunc (S, &DOptTransfers3, 1);
+ C += RunOptFunc (S, &DOptTransfers4, 1);
C += RunOptFunc (S, &DOptStore1, 1);
C += RunOptFunc (S, &DOptStore5, 1);
C += RunOptFunc (S, &DOptPushPop, 1);
static unsigned RunOptGroup4 (CodeSeg* S)
+/* Run another round of pattern replacements. These are done late, since there
+ * may be better replacements before.
+ */
+{
+ unsigned Changes = 0;
+
+ /* Repeat some of the steps here */
+ Changes += RunOptFunc (S, &DOptPush1, 1);
+ Changes += RunOptFunc (S, &DOptPush2, 1);
+ Changes += RunOptFunc (S, &DOptUnusedLoads, 1);
+ Changes += RunOptFunc (S, &DOptTest2, 1);
+ Changes += RunOptFunc (S, &DOptTransfers2, 1);
+ Changes += RunOptFunc (S, &DOptLoad2, 1);
+
+ /* Return the number of changes */
+ return Changes;
+}
+
+
+
+static unsigned RunOptGroup5 (CodeSeg* S)
/* 65C02 specific optimizations. */
{
unsigned Changes = 0;
-static unsigned RunOptGroup5 (CodeSeg* S)
-/* Run another round of pattern replacements. These are done late, since there
- * may be better replacements before.
+static unsigned RunOptGroup6 (CodeSeg* S)
+/* This one is quite special. It tries to replace "lda (sp),y" by "lda (sp,x)".
+ * The latter is ony cycle slower, but if we're able to remove the necessary
+ * load of the Y register, because X is zero anyway, we gain 1 cycle and
+ * shorten the code by one (transfer) or two bytes (load). So what we do is
+ * to replace the insns, remove unused loads, and then change back all insns
+ * where Y is still zero (meaning that the load has not been removed).
*/
{
unsigned Changes = 0;
- Changes += RunOptFunc (S, &DOptPush1, 1);
- Changes += RunOptFunc (S, &DOptPush2, 1);
- Changes += RunOptFunc (S, &DOptUnusedLoads, 1);
- Changes += RunOptFunc (S, &DOptTransfers2, 1);
+ /* This group will only run for a standard 6502, because the 65C02 has a
+ * better addressing mode that covers this case.
+ */
+ if ((CPUIsets[CPU] & CPU_ISET_65SC02) == 0) {
+ Changes += RunOptFunc (S, &DOptIndLoads1, 1);
+ Changes += RunOptFunc (S, &DOptUnusedLoads, 1);
+ Changes += RunOptFunc (S, &DOptIndLoads2, 1);
+ }
/* Return the number of changes */
return Changes;
-static unsigned RunOptGroup6 (CodeSeg* S)
+static unsigned RunOptGroup7 (CodeSeg* S)
/* The last group of optimization steps. Adjust branches, do size optimizations.
*/
{
unsigned Changes = 0;
unsigned C;
- if (S->CodeSizeFactor <= 100) {
- /* Optimize for size, that is replace operations by shorter ones, even
- * if this does hinder further optimizations (no problem since we're
- * done soon).
+ /* Optimize for size, that is replace operations by shorter ones, even
+ * if this does hinder further optimizations (no problem since we're
+ * done soon).
+ */
+ C = RunOptFunc (S, &DOptSize1, 1);
+ if (C) {
+ Changes += C;
+ /* Run some optimization passes again, since the size optimizations
+ * may have opened new oportunities.
*/
- C = RunOptFunc (S, &DOptSize1, 1);
- if (C) {
- Changes += C;
- /* Run some optimization passes again, since the size optimizations
- * may have opened new oportunities.
- */
- Changes += RunOptFunc (S, &DOptUnusedLoads, 1);
- Changes += RunOptFunc (S, &DOptJumpTarget, 5);
- Changes += RunOptFunc (S, &DOptStore5, 1);
- }
+ Changes += RunOptFunc (S, &DOptUnusedLoads, 1);
+ Changes += RunOptFunc (S, &DOptUnusedStores, 1);
+ Changes += RunOptFunc (S, &DOptJumpTarget1, 5);
+ Changes += RunOptFunc (S, &DOptStore5, 1);
}
+
C = RunOptFunc (S, &DOptSize2, 1);
if (C) {
Changes += C;
* may have opened new oportunities.
*/
Changes += RunOptFunc (S, &DOptUnusedLoads, 1);
- Changes += RunOptFunc (S, &DOptJumpTarget, 5);
+ Changes += RunOptFunc (S, &DOptJumpTarget1, 5);
Changes += RunOptFunc (S, &DOptStore5, 1);
+ Changes += RunOptFunc (S, &DOptTransfers3, 1);
}
/* Adjust branch distances */
RunOptGroup4 (S);
RunOptGroup5 (S);
RunOptGroup6 (S);
+ RunOptGroup7 (S);
/* Write statistics */
if (StatFileName) {