/* */
/* */
/* */
-/* (C) 2001 Ullrich von Bassewitz */
+/* (C) 2001-2002 Ullrich von Bassewitz */
/* Wacholderweg 14 */
/* D-70597 Stuttgart */
/* EMail: uz@cc65.org */
-/* b6502 */
+#include <stdlib.h>
+#include <string.h>
+
+/* common */
+#include "abend.h"
+#include "chartype.h"
+#include "print.h"
+#include "xmalloc.h"
+#include "xsprintf.h"
+
+/* cc65 */
+#include "asmlabel.h"
#include "codeent.h"
+#include "codeinfo.h"
+#include "coptadd.h"
+#include "coptc02.h"
+#include "coptcmp.h"
+#include "coptind.h"
+#include "coptneg.h"
+#include "coptpush.h"
+#include "coptstop.h"
+#include "coptsub.h"
+#include "copttest.h"
+#include "cpu.h"
+#include "error.h"
+#include "global.h"
#include "codeopt.h"
/*****************************************************************************/
-/* Data */
+/* Optimize shifts */
/*****************************************************************************/
-/* Counter for the number of changes in one run. The optimizer process is
- * repeated until there are no more changes.
+static unsigned OptShift1 (CodeSeg* S)
+/* A call to the shlaxN routine may get replaced by one or more asl insns
+ * if the value of X is not used later.
+ */
+{
+ unsigned Changes = 0;
+
+ /* Walk over the entries */
+ unsigned I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ /* Get next entry */
+ CodeEntry* E = CS_GetEntry (S, I);
+
+ /* Check for the sequence */
+ if (E->OPC == OP65_JSR &&
+ (strncmp (E->Arg, "shlax", 5) == 0 ||
+ strncmp (E->Arg, "aslax", 5) == 0) &&
+ strlen (E->Arg) == 6 &&
+ IsDigit (E->Arg[5]) &&
+ !RegXUsed (S, I+1)) {
+
+ /* Insert shift insns */
+ unsigned Count = E->Arg[5] - '0';
+ while (Count--) {
+ CodeEntry* X = NewCodeEntry (OP65_ASL, AM65_ACC, "a", 0, E->LI);
+ CS_InsertEntry (S, X, I+1);
+ }
+
+ /* Delete the call to shlax */
+ CS_DelEntry (S, I);
+
+ /* Remember, we had changes */
+ ++Changes;
+
+ }
+
+ /* Next entry */
+ ++I;
+
+ }
+
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
+static unsigned OptShift2 (CodeSeg* S)
+/* A call to the shraxN routine may get replaced by one or more lsr insns
+ * if the value of X is not used later.
*/
-static unsigned OptChanges;
+{
+ unsigned Changes = 0;
+
+ /* Walk over the entries */
+ unsigned I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ /* Get next entry */
+ CodeEntry* E = CS_GetEntry (S, I);
+
+ /* Check for the sequence */
+ if (E->OPC == OP65_JSR &&
+ strncmp (E->Arg, "shrax", 5) == 0 &&
+ strlen (E->Arg) == 6 &&
+ IsDigit (E->Arg[5]) &&
+ !RegXUsed (S, I+1)) {
+
+ /* Insert shift insns */
+ unsigned Count = E->Arg[5] - '0';
+ while (Count--) {
+ CodeEntry* X = NewCodeEntry (OP65_LSR, AM65_ACC, "a", 0, E->LI);
+ CS_InsertEntry (S, X, I+1);
+ }
+
+ /* Delete the call to shlax */
+ CS_DelEntry (S, I);
+
+ /* Remember, we had changes */
+ ++Changes;
+
+ }
+
+ /* Next entry */
+ ++I;
+
+ }
+
+ /* Return the number of changes made */
+ return Changes;
+}
/*****************************************************************************/
-/* Remove dead jumps */
+/* Optimize stores through pointers */
/*****************************************************************************/
-static void OptDeadJumps (CodeSeg* S)
-/* Remove dead jumps (jumps to the next instruction) */
+static unsigned OptPtrStore1Sub (CodeSeg* S, unsigned I, CodeEntry** const L)
+/* Check if this is one of the allowed suboperation for OptPtrStore1 */
{
- CodeEntry* E;
- unsigned I;
+ /* Check for a label attached to the entry */
+ if (CE_HasLabel (L[0])) {
+ return 0;
+ }
+
+ /* Check for single insn sub ops */
+ if (L[0]->OPC == OP65_AND ||
+ L[0]->OPC == OP65_EOR ||
+ L[0]->OPC == OP65_ORA ||
+ (L[0]->OPC == OP65_JSR && strncmp (L[0]->Arg, "shlax", 5) == 0) ||
+ (L[0]->OPC == OP65_JSR && strncmp (L[0]->Arg, "shrax", 5) == 0)) {
+
+ /* One insn */
+ return 1;
+
+ } else if (L[0]->OPC == OP65_CLC &&
+ (L[1] = CS_GetNextEntry (S, I)) != 0 &&
+ L[1]->OPC == OP65_ADC &&
+ !CE_HasLabel (L[1])) {
+ return 2;
+ } else if (L[0]->OPC == OP65_SEC &&
+ (L[1] = CS_GetNextEntry (S, I)) != 0 &&
+ L[1]->OPC == OP65_SBC &&
+ !CE_HasLabel (L[1])) {
+ return 2;
+ }
+
+
+
+ /* Not found */
+ return 0;
+}
+
+
+
+static unsigned OptPtrStore1 (CodeSeg* S)
+/* Search for the sequence:
+ *
+ * jsr pushax
+ * ldy xxx
+ * jsr ldauidx
+ * subop
+ * ldy yyy
+ * jsr staspidx
+ *
+ * and replace it by:
+ *
+ * sta ptr1
+ * stx ptr1+1
+ * ldy xxx
+ * ldx #$00
+ * lda (ptr1),y
+ * subop
+ * ldy yyy
+ * sta (ptr1),y
+ */
+{
+ unsigned Changes = 0;
+
+ /* Walk over the entries */
+ unsigned I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ unsigned K;
+ CodeEntry* L[10];
+
+ /* Get next entry */
+ L[0] = CS_GetEntry (S, I);
+
+ /* Check for the sequence */
+ if (CE_IsCall (L[0], "pushax") &&
+ CS_GetEntries (S, L+1, I+1, 3) &&
+ L[1]->OPC == OP65_LDY &&
+ CE_KnownImm (L[1]) &&
+ !CE_HasLabel (L[1]) &&
+ CE_IsCall (L[2], "ldauidx") &&
+ !CE_HasLabel (L[2]) &&
+ (K = OptPtrStore1Sub (S, I+3, L+3)) > 0 &&
+ CS_GetEntries (S, L+3+K, I+3+K, 2) &&
+ L[3+K]->OPC == OP65_LDY &&
+ CE_KnownImm (L[3+K]) &&
+ !CE_HasLabel (L[3+K]) &&
+ CE_IsCall (L[4+K], "staspidx") &&
+ !CE_HasLabel (L[4+K])) {
+
+ CodeEntry* X;
+
+ /* Create and insert the stores */
+ X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+1);
+
+ X = NewCodeEntry (OP65_STX, AM65_ZP, "ptr1+1", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+2);
+
+ /* Delete the call to pushax */
+ CS_DelEntry (S, I);
+
+ /* Delete the call to ldauidx */
+ CS_DelEntry (S, I+3);
+
+ /* Insert the load from ptr1 */
+ X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[3]->LI);
+ CS_InsertEntry (S, X, I+3);
+ X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, "ptr1", 0, L[2]->LI);
+ CS_InsertEntry (S, X, I+4);
+
+ /* Insert the store through ptr1 */
+ X = NewCodeEntry (OP65_STA, AM65_ZP_INDY, "ptr1", 0, L[3]->LI);
+ CS_InsertEntry (S, X, I+6+K);
+
+ /* Delete the call to staspidx */
+ CS_DelEntry (S, I+7+K);
+
+ /* Remember, we had changes */
+ ++Changes;
+
+ }
+
+ /* Next entry */
+ ++I;
+
+ }
+
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
+static unsigned OptPtrStore2 (CodeSeg* S)
+/* Search for the sequence:
+ *
+ * jsr pushax
+ * lda xxx
+ * ldy yyy
+ * jsr staspidx
+ *
+ * and replace it by:
+ *
+ * sta ptr1
+ * stx ptr1+1
+ * lda xxx
+ * ldy yyy
+ * sta (ptr1),y
+ */
+{
+ unsigned Changes = 0;
+
+ /* Walk over the entries */
+ unsigned I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ CodeEntry* L[4];
+
+ /* Get next entry */
+ L[0] = CS_GetEntry (S, I);
+
+ /* Check for the sequence */
+ if (CE_IsCall (L[0], "pushax") &&
+ CS_GetEntries (S, L+1, I+1, 3) &&
+ L[1]->OPC == OP65_LDA &&
+ !CE_HasLabel (L[1]) &&
+ L[2]->OPC == OP65_LDY &&
+ !CE_HasLabel (L[2]) &&
+ CE_IsCall (L[3], "staspidx") &&
+ !CE_HasLabel (L[3])) {
+
+ CodeEntry* X;
+
+ /* Create and insert the stores */
+ X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+1);
+
+ X = NewCodeEntry (OP65_STX, AM65_ZP, "ptr1+1", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+2);
+
+ /* Delete the call to pushax */
+ CS_DelEntry (S, I);
+
+ /* Insert the store through ptr1 */
+ X = NewCodeEntry (OP65_STA, AM65_ZP_INDY, "ptr1", 0, L[3]->LI);
+ CS_InsertEntry (S, X, I+4);
+
+ /* Delete the call to staspidx */
+ CS_DelEntry (S, I+5);
+
+ /* Remember, we had changes */
+ ++Changes;
+
+ }
+
+ /* Next entry */
+ ++I;
+
+ }
+
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
+/*****************************************************************************/
+/* Optimize loads through pointers */
+/*****************************************************************************/
+
+
+
+static unsigned OptPtrLoad1 (CodeSeg* S)
+/* Search for the sequence:
+ *
+ * tax
+ * dey
+ * lda (sp),y # May be any destination
+ * ldy ...
+ * jsr ldauidx
+ *
+ * and replace it by:
+ *
+ * sta ptr1+1
+ * dey
+ * lda (sp),y
+ * sta ptr1
+ * ldy ...
+ * ldx #$00
+ * lda (ptr1),y
+ */
+{
+ unsigned Changes = 0;
+
+ /* Walk over the entries */
+ unsigned I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ CodeEntry* L[5];
+
+ /* Get next entry */
+ L[0] = CS_GetEntry (S, I);
+
+ /* Check for the sequence */
+ if (L[0]->OPC == OP65_TAX &&
+ CS_GetEntries (S, L+1, I+1, 4) &&
+ L[1]->OPC == OP65_DEY &&
+ !CE_HasLabel (L[1]) &&
+ L[2]->OPC == OP65_LDA &&
+ !CE_HasLabel (L[2]) &&
+ L[3]->OPC == OP65_LDY &&
+ !CE_HasLabel (L[3]) &&
+ CE_IsCall (L[4], "ldauidx") &&
+ !CE_HasLabel (L[4])) {
+
+ CodeEntry* X;
+
+ /* Store the high byte and remove the TAX instead */
+ X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1+1", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+1);
+ CS_DelEntry (S, I);
+
+ /* Store the low byte */
+ X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1", 0, L[2]->LI);
+ CS_InsertEntry (S, X, I+3);
+
+ /* Delete the call to ldauidx */
+ CS_DelEntry (S, I+5);
+
+ /* Load high and low byte */
+ X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[3]->LI);
+ CS_InsertEntry (S, X, I+5);
+ X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, "ptr1", 0, L[3]->LI);
+ CS_InsertEntry (S, X, I+6);
+
+ /* Remember, we had changes */
+ ++Changes;
+
+ }
+
+ /* Next entry */
+ ++I;
+
+ }
+
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
+static unsigned OptPtrLoad2 (CodeSeg* S)
+/* Search for the sequence:
+ *
+ * clc
+ * adc xxx
+ * tay
+ * txa
+ * adc yyy
+ * tax
+ * tya
+ * ldy
+ * jsr ldauidx
+ *
+ * and replace it by:
+ *
+ * clc
+ * adc xxx
+ * sta ptr1
+ * txa
+ * adc yyy
+ * sta ptr1+1
+ * ldy
+ * ldx #$00
+ * lda (ptr1),y
+ */
+{
+ unsigned Changes = 0;
+
+ /* Walk over the entries */
+ unsigned I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ CodeEntry* L[9];
+
+ /* Get next entry */
+ L[0] = CS_GetEntry (S, I);
+
+ /* Check for the sequence */
+ if (L[0]->OPC == OP65_CLC &&
+ CS_GetEntries (S, L+1, I+1, 8) &&
+ L[1]->OPC == OP65_ADC &&
+ !CE_HasLabel (L[1]) &&
+ L[2]->OPC == OP65_TAY &&
+ !CE_HasLabel (L[2]) &&
+ L[3]->OPC == OP65_TXA &&
+ !CE_HasLabel (L[3]) &&
+ L[4]->OPC == OP65_ADC &&
+ !CE_HasLabel (L[4]) &&
+ L[5]->OPC == OP65_TAX &&
+ !CE_HasLabel (L[5]) &&
+ L[6]->OPC == OP65_TYA &&
+ !CE_HasLabel (L[6]) &&
+ L[7]->OPC == OP65_LDY &&
+ !CE_HasLabel (L[7]) &&
+ CE_IsCall (L[8], "ldauidx") &&
+ !CE_HasLabel (L[8])) {
+
+ CodeEntry* X;
+ CodeEntry* P;
+
+ /* Store the low byte and remove the TAY instead */
+ X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1", 0, L[1]->LI);
+ CS_InsertEntry (S, X, I+2);
+ CS_DelEntry (S, I+3);
+
+ /* Store the high byte */
+ X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1+1", 0, L[4]->LI);
+ CS_InsertEntry (S, X, I+5);
+
+ /* If the instruction before the adc is a ldx, replace the
+ * txa by and lda with the same location of the ldx.
+ */
+ if ((P = CS_GetPrevEntry (S, I)) != 0 &&
+ P->OPC == OP65_LDX &&
+ !CE_HasLabel (P)) {
+
+ X = NewCodeEntry (OP65_LDA, P->AM, P->Arg, 0, P->LI);
+ CS_InsertEntry (S, X, I+4);
+ CS_DelEntry (S, I+3);
+ }
+
+ /* Delete more transfer insns */
+ CS_DelEntry (S, I+7);
+ CS_DelEntry (S, I+6);
+
+ /* Delete the call to ldauidx */
+ CS_DelEntry (S, I+7);
+
+ /* Load high and low byte */
+ X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[7]->LI);
+ CS_InsertEntry (S, X, I+7);
+ X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, "ptr1", 0, L[7]->LI);
+ CS_InsertEntry (S, X, I+8);
+
+ /* Remember, we had changes */
+ ++Changes;
+
+ }
+
+ /* Next entry */
+ ++I;
+
+ }
+
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
+static unsigned OptPtrLoad3 (CodeSeg* S)
+/* Search for the sequence:
+ *
+ * adc xxx
+ * pha
+ * txa
+ * iny
+ * adc yyy
+ * tax
+ * pla
+ * ldy
+ * jsr ldauidx
+ *
+ * and replace it by:
+ *
+ * adc xxx
+ * sta ptr1
+ * txa
+ * iny
+ * adc yyy
+ * sta ptr1+1
+ * ldy
+ * ldx #$00
+ * lda (ptr1),y
+ */
+{
+ unsigned Changes = 0;
+
+ /* Walk over the entries */
+ unsigned I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ CodeEntry* L[9];
+
+ /* Get next entry */
+ L[0] = CS_GetEntry (S, I);
+
+ /* Check for the sequence */
+ if (L[0]->OPC == OP65_ADC &&
+ CS_GetEntries (S, L+1, I+1, 8) &&
+ L[1]->OPC == OP65_PHA &&
+ !CE_HasLabel (L[1]) &&
+ L[2]->OPC == OP65_TXA &&
+ !CE_HasLabel (L[2]) &&
+ L[3]->OPC == OP65_INY &&
+ !CE_HasLabel (L[3]) &&
+ L[4]->OPC == OP65_ADC &&
+ !CE_HasLabel (L[4]) &&
+ L[5]->OPC == OP65_TAX &&
+ !CE_HasLabel (L[5]) &&
+ L[6]->OPC == OP65_PLA &&
+ !CE_HasLabel (L[6]) &&
+ L[7]->OPC == OP65_LDY &&
+ !CE_HasLabel (L[7]) &&
+ CE_IsCall (L[8], "ldauidx") &&
+ !CE_HasLabel (L[8])) {
+
+ CodeEntry* X;
+
+ /* Store the low byte and remove the PHA instead */
+ X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+1);
+ CS_DelEntry (S, I+2);
+
+ /* Store the high byte */
+ X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1+1", 0, L[4]->LI);
+ CS_InsertEntry (S, X, I+5);
+
+ /* Delete more transfer and PLA insns */
+ CS_DelEntry (S, I+7);
+ CS_DelEntry (S, I+6);
+
+ /* Delete the call to ldauidx */
+ CS_DelEntry (S, I+7);
+
+ /* Load high and low byte */
+ X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[6]->LI);
+ CS_InsertEntry (S, X, I+7);
+ X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, "ptr1", 0, L[6]->LI);
+ CS_InsertEntry (S, X, I+8);
+
+ /* Remember, we had changes */
+ ++Changes;
+
+ }
+
+ /* Next entry */
+ ++I;
+
+ }
+
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
+static unsigned OptPtrLoad4 (CodeSeg* S)
+/* Search for the sequence:
+ *
+ * lda #<(label+0)
+ * ldx #>(label+0)
+ * clc
+ * adc xxx
+ * bcc L
+ * inx
+ * L: ldy #$00
+ * jsr ldauidx
+ *
+ * and replace it by:
+ *
+ * ldy xxx
+ * ldx #$00
+ * lda label,y
+ */
+{
+ unsigned Changes = 0;
+
+ /* Walk over the entries */
+ unsigned I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ CodeEntry* L[8];
+ unsigned Len;
+
+ /* Get next entry */
+ L[0] = CS_GetEntry (S, I);
+
+ /* Check for the sequence */
+ if (L[0]->OPC == OP65_LDA &&
+ L[0]->AM == AM65_IMM &&
+ CS_GetEntries (S, L+1, I+1, 7) &&
+ L[1]->OPC == OP65_LDX &&
+ L[1]->AM == AM65_IMM &&
+ !CE_HasLabel (L[1]) &&
+ L[2]->OPC == OP65_CLC &&
+ !CE_HasLabel (L[2]) &&
+ L[3]->OPC == OP65_ADC &&
+ (L[3]->AM == AM65_ABS || L[3]->AM == AM65_ZP) &&
+ !CE_HasLabel (L[3]) &&
+ (L[4]->OPC == OP65_BCC || L[4]->OPC == OP65_JCC) &&
+ L[4]->JumpTo != 0 &&
+ L[4]->JumpTo->Owner == L[6] &&
+ !CE_HasLabel (L[4]) &&
+ L[5]->OPC == OP65_INX &&
+ !CE_HasLabel (L[5]) &&
+ L[6]->OPC == OP65_LDY &&
+ CE_KnownImm (L[6]) &&
+ L[6]->Num == 0 &&
+ CE_IsCall (L[7], "ldauidx") &&
+ !CE_HasLabel (L[7]) &&
+ /* Check the label last because this is quite costly */
+ (Len = strlen (L[0]->Arg)) > 3 &&
+ L[0]->Arg[0] == '<' &&
+ L[0]->Arg[1] == '(' &&
+ strlen (L[1]->Arg) == Len &&
+ L[1]->Arg[0] == '>' &&
+ memcmp (L[0]->Arg+1, L[1]->Arg+1, Len-1) == 0) {
+
+ CodeEntry* X;
+ char* Label;
+
+ /* We will create all the new stuff behind the current one so
+ * we keep the line references.
+ */
+ X = NewCodeEntry (OP65_LDY, L[3]->AM, L[3]->Arg, 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+8);
+
+ X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+9);
+
+ Label = memcpy (xmalloc (Len-2), L[0]->Arg+2, Len-3);
+ Label[Len-3] = '\0';
+ X = NewCodeEntry (OP65_LDA, AM65_ABSY, Label, 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+10);
+ xfree (Label);
+
+ /* Remove the old code */
+ CS_DelEntries (S, I, 8);
+
+ /* Remember, we had changes */
+ ++Changes;
+
+ }
+
+ /* Next entry */
+ ++I;
+
+ }
+
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
+static unsigned OptPtrLoad5 (CodeSeg* S)
+/* Search for the sequence:
+ *
+ * lda #<(label+0)
+ * ldx #>(label+0)
+ * ldy #$xx
+ * clc
+ * adc (sp),y
+ * bcc L
+ * inx
+ * L: ldy #$00
+ * jsr ldauidx
+ *
+ * and replace it by:
+ *
+ * ldy #$xx
+ * lda (sp),y
+ * tay
+ * ldx #$00
+ * lda label,y
+ */
+{
+ unsigned Changes = 0;
+
+ /* Walk over the entries */
+ unsigned I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ CodeEntry* L[9];
+ unsigned Len;
+
+ /* Get next entry */
+ L[0] = CS_GetEntry (S, I);
+
+ /* Check for the sequence */
+ if (L[0]->OPC == OP65_LDA &&
+ L[0]->AM == AM65_IMM &&
+ CS_GetEntries (S, L+1, I+1, 8) &&
+ L[1]->OPC == OP65_LDX &&
+ L[1]->AM == AM65_IMM &&
+ !CE_HasLabel (L[1]) &&
+ L[2]->OPC == OP65_LDY &&
+ CE_KnownImm (L[2]) &&
+ !CE_HasLabel (L[2]) &&
+ L[3]->OPC == OP65_CLC &&
+ !CE_HasLabel (L[3]) &&
+ L[4]->OPC == OP65_ADC &&
+ L[4]->AM == AM65_ZP_INDY &&
+ !CE_HasLabel (L[4]) &&
+ (L[5]->OPC == OP65_BCC || L[5]->OPC == OP65_JCC) &&
+ L[5]->JumpTo != 0 &&
+ L[5]->JumpTo->Owner == L[7] &&
+ !CE_HasLabel (L[5]) &&
+ L[6]->OPC == OP65_INX &&
+ !CE_HasLabel (L[6]) &&
+ L[7]->OPC == OP65_LDY &&
+ CE_KnownImm (L[7]) &&
+ L[7]->Num == 0 &&
+ CE_IsCall (L[8], "ldauidx") &&
+ !CE_HasLabel (L[8]) &&
+ /* Check the label last because this is quite costly */
+ (Len = strlen (L[0]->Arg)) > 3 &&
+ L[0]->Arg[0] == '<' &&
+ L[0]->Arg[1] == '(' &&
+ strlen (L[1]->Arg) == Len &&
+ L[1]->Arg[0] == '>' &&
+ memcmp (L[0]->Arg+1, L[1]->Arg+1, Len-1) == 0) {
+
+ CodeEntry* X;
+ char* Label;
+
+ /* Add the lda */
+ X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, L[4]->Arg, 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+3);
+
+ /* Add the tay */
+ X = NewCodeEntry (OP65_TAY, AM65_IMP, 0, 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+4);
+
+ /* Add the ldx */
+ X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+5);
+
+ /* Add the lda */
+ Label = memcpy (xmalloc (Len-2), L[0]->Arg+2, Len-3);
+ Label[Len-3] = '\0';
+ X = NewCodeEntry (OP65_LDA, AM65_ABSY, Label, 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+6);
+ xfree (Label);
+
+ /* Remove the old code */
+ CS_DelEntries (S, I, 2);
+ CS_DelEntries (S, I+5, 6);
+
+ /* Remember, we had changes */
+ ++Changes;
+
+ }
+
+ /* Next entry */
+ ++I;
+
+ }
+
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
+static unsigned OptPtrLoad6 (CodeSeg* S)
+/* Search for the sequence
+ *
+ * ldy ...
+ * jsr ldauidx
+ *
+ * and replace it by:
+ *
+ * ldy ...
+ * stx ptr1+1
+ * sta ptr1
+ * ldx #$00
+ * lda (ptr1),y
+ *
+ * This step must be execute *after* OptPtrLoad1!
+ */
+{
+ unsigned Changes = 0;
+
+ /* Walk over the entries */
+ unsigned I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ CodeEntry* L[2];
+
+ /* Get next entry */
+ L[0] = CS_GetEntry (S, I);
+
+ /* Check for the sequence */
+ if (L[0]->OPC == OP65_LDY &&
+ CS_GetEntries (S, L+1, I+1, 1) &&
+ CE_IsCall (L[1], "ldauidx") &&
+ !CE_HasLabel (L[1])) {
+
+ CodeEntry* X;
+
+ /* Store the high byte */
+ X = NewCodeEntry (OP65_STA, AM65_ZP, "ptr1", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+1);
+
+ /* Store the low byte */
+ X = NewCodeEntry (OP65_STX, AM65_ZP, "ptr1+1", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+2);
+
+ /* Delete the call to ldauidx */
+ CS_DelEntry (S, I+3);
+
+ /* Load the high and low byte */
+ X = NewCodeEntry (OP65_LDX, AM65_IMM, "$00", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+3);
+ X = NewCodeEntry (OP65_LDA, AM65_ZP_INDY, "ptr1", 0, L[0]->LI);
+ CS_InsertEntry (S, X, I+4);
+
+ /* Remember, we had changes */
+ ++Changes;
+
+ }
+
+ /* Next entry */
+ ++I;
- /* Get the number of entries, bail out if we have less than two entries */
- unsigned Count = CollCount (&S->Entries);
- if (Count < 2) {
- return;
}
- /* Walk over all entries minus the last one */
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
+/*****************************************************************************/
+/* Decouple operations */
+/*****************************************************************************/
+
+
+
+static unsigned OptDecouple (CodeSeg* S)
+/* Decouple operations, that is, do the following replacements:
+ *
+ * dex -> ldx #imm
+ * inx -> ldx #imm
+ * dey -> ldy #imm
+ * iny -> ldy #imm
+ * tax -> ldx #imm
+ * txa -> lda #imm
+ * tay -> ldy #imm
+ * tya -> lda #imm
+ * lda sreg -> lda #imm
+ * ldx sreg -> ldx #imm
+ * ldy sreg -> ldy #imm
+ *
+ * Provided that the register values are known of course.
+ */
+{
+ unsigned Changes = 0;
+ unsigned I;
+
+ /* Generate register info for the following step */
+ CS_GenRegInfo (S);
+
+ /* Walk over the entries */
I = 0;
- while (I < Count-1) {
-
- /* Get the next entry */
- E = CollAt (&S->Entries, I);
-
- /* Check if it's a branch, if it has a local target, and if the target
- * is the next instruction.
- */
- if (E->AM == AM_BRA) {
- printf ("BRA on entry %u:\n", I);
- if (E->JumpTo) {
- printf (" JumpTo ok\n");
- if (E->JumpTo->Owner == CollAt (&S->Entries, I+1)) {
- printf (" Branch to next insn\n");
+ while (I < CS_GetEntryCount (S)) {
+
+ char Buf [16];
+
+ /* Get next entry */
+ CodeEntry* E = CS_GetEntry (S, I);
+
+ /* Assume we have no replacement */
+ CodeEntry* X = 0;
+
+ /* Check the instruction */
+ switch (E->OPC) {
+
+ case OP65_DEX:
+ if (E->RI->In.RegX >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", (E->RI->In.RegX - 1) & 0xFF);
+ X = NewCodeEntry (OP65_LDX, AM65_IMM, Buf, 0, E->LI);
+ }
+ break;
+
+ case OP65_DEY:
+ if (E->RI->In.RegY >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", (E->RI->In.RegY - 1) & 0xFF);
+ X = NewCodeEntry (OP65_LDY, AM65_IMM, Buf, 0, E->LI);
+ }
+ break;
+
+ case OP65_INX:
+ if (E->RI->In.RegX >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", (E->RI->In.RegX + 1) & 0xFF);
+ X = NewCodeEntry (OP65_LDX, AM65_IMM, Buf, 0, E->LI);
+ }
+ break;
+
+ case OP65_INY:
+ if (E->RI->In.RegY >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", (E->RI->In.RegY + 1) & 0xFF);
+ X = NewCodeEntry (OP65_LDY, AM65_IMM, Buf, 0, E->LI);
+ }
+ break;
+
+ case OP65_LDA:
+ if (E->AM == AM65_ZP) {
+ if ((E->Use & REG_SREG_LO) != 0 && E->RI->In.SRegLo >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", E->RI->In.SRegLo);
+ X = NewCodeEntry (OP65_LDA, AM65_IMM, Buf, 0, E->LI);
+ } else if ((E->Use & REG_SREG_HI) != 0 && E->RI->In.SRegHi >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", E->RI->In.SRegHi);
+ X = NewCodeEntry (OP65_LDA, AM65_IMM, Buf, 0, E->LI);
+ }
}
- }
+ break;
+
+ case OP65_LDX:
+ if (E->AM == AM65_ZP) {
+ if ((E->Use & REG_SREG_LO) != 0 && E->RI->In.SRegLo >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", E->RI->In.SRegLo);
+ X = NewCodeEntry (OP65_LDX, AM65_IMM, Buf, 0, E->LI);
+ } else if ((E->Use & REG_SREG_HI) != 0 && E->RI->In.SRegHi >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", E->RI->In.SRegHi);
+ X = NewCodeEntry (OP65_LDX, AM65_IMM, Buf, 0, E->LI);
+ }
+ }
+ break;
+
+ case OP65_LDY:
+ if (E->AM == AM65_ZP) {
+ if ((E->Use & REG_SREG_LO) != 0 && E->RI->In.SRegLo >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", E->RI->In.SRegLo);
+ X = NewCodeEntry (OP65_LDY, AM65_IMM, Buf, 0, E->LI);
+ } else if ((E->Use & REG_SREG_HI) != 0 && E->RI->In.SRegHi >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", E->RI->In.SRegHi);
+ X = NewCodeEntry (OP65_LDY, AM65_IMM, Buf, 0, E->LI);
+ }
+ }
+ break;
+
+ case OP65_TAX:
+ if (E->RI->In.RegA >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", E->RI->In.RegA);
+ X = NewCodeEntry (OP65_LDX, AM65_IMM, Buf, 0, E->LI);
+ }
+ break;
+
+ case OP65_TAY:
+ if (E->RI->In.RegA >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", E->RI->In.RegA);
+ X = NewCodeEntry (OP65_LDY, AM65_IMM, Buf, 0, E->LI);
+ }
+ break;
+
+ case OP65_TXA:
+ if (E->RI->In.RegX >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", E->RI->In.RegX);
+ X = NewCodeEntry (OP65_LDA, AM65_IMM, Buf, 0, E->LI);
+ }
+ break;
+
+ case OP65_TYA:
+ if (E->RI->In.RegY >= 0) {
+ xsprintf (Buf, sizeof (Buf), "$%02X", E->RI->In.RegY);
+ X = NewCodeEntry (OP65_LDA, AM65_IMM, Buf, 0, E->LI);
+ }
+ break;
+
+ default:
+ /* Avoid gcc warnings */
+ break;
+
}
- if (E->AM == AM_BRA && E->JumpTo && E->JumpTo->Owner == CollAt (&S->Entries, I+1)) {
+ /* Insert the replacement if we have one */
+ if (X) {
+ CS_InsertEntry (S, X, I+1);
+ CS_DelEntry (S, I);
+ ++Changes;
+ }
- /* Remember the label */
- CodeLabel* L = E->JumpTo;
+ /* Next entry */
+ ++I;
- /* Jump to next instruction, remove it */
- unsigned Remaining = RemoveLabelRef (L, E);
- CollDelete (&S->Entries, I);
- FreeCodeEntry (E);
- --Count;
+ }
- /* If the label has no more references, remove it */
- if (Remaining == 0) {
- CollDeleteItem (&L->Owner->Labels, L);
- FreeCodeLabel (L);
- }
+ /* Free register info */
+ CS_FreeRegInfo (S);
+
+ /* Return the number of changes made */
+ return Changes;
+}
+
+
+
+/*****************************************************************************/
+/* Size optimization */
+/*****************************************************************************/
+
+
+
+#if 0
+static unsigned OptSize1 (CodeSeg* S)
+/* Do size optimization by calling special subroutines that preload registers.
+ * This routine does not work standalone, it needs a following register load
+ * removal pass.
+ */
+{
+ static const char* Func = {
+ "stax0sp", /* staxysp, y = 0 */
+ "addeq0sp",
+ "ldax0sp", /* ldaxysp, y = 1 */
+ "ldeax0sp", /* ldeaxysp, y = 3 */
+ "push0", /* pushax, a = 0, x = 0 */
+ "pusha0", /* pushax, x = 0 */
+ "pushaFF", /* pushax, x = ff */
+ "pusha0sp", /* pushaysp, y = 0 */
+ "tosadda0", /* tosaddax, x = 0 */
+ "tosanda0", /* tosandax, x = 0 */
+ "tosdiva0", /* tosdivax, x = 0 */
+ "toseqa0", /* toseqax, x = 0 */
+ "tosgea0", /* tosgeax, x = 0 */
+ "tosgta0", /* tosgtax, x = 0 */
+ "tosadd0ax", /* tosaddeax, sreg = 0 */
+ "laddeqa", /* laddeq, sreg = 0, x = 0 */
+ "laddeq1", /* laddeq, sreg = 0, x = 0, a = 1 */
+ "laddeq0sp", /* laddeqysp, y = 0 */
+ "tosand0ax", /* tosandeax, sreg = 0 */
+ "ldaxi", /* ldaxidx, y = 1 */
+ "ldeaxi", /* ldeaxidx, y = 3 */
+ "ldeax0sp", /* ldeaxysp, y = 3 */
+ "tosdiv0ax", /* tosdiveax, sreg = 0 */
+ "toslea0", /* tosleax, x = 0 */
+ "tosmod0ax", /* tosmodeax, sreg = 0 */
+ "tosmul0ax", /* tosmuleax, sreg = 0 */
+ "tosumul0ax", /* tosumuleax, sreg = 0 */
+ "tosor0ax", /* tosoreax, sreg = 0 */
+ "push0ax", /* pusheax, sreg = 0 */
+ "tosrsub0ax", /* tosrsubeax, sreg = 0 */
+ "tosshl0ax", /* tosshleax, sreg = 0 */
+ "tosasl0ax", /* tosasleax, sreg = 0 */
+ "tosshr0ax", /* tosshreax, sreg = 0 */
+ "tosasr0ax", /* tosasreax, sreg = 0 */
+ "tossub0ax", /* tossubeax, sreg = 0 */
+ "lsubeqa", /* lsubeq, sreg = 0, x = 0 */
+ "lsubeq1", /* lsubeq, sreg = 0, x = 0, a = 1 */
+ "lsubeq0sp", /* lsubeqysp, y = 0 */
+ "toslta0", /* tosltax, x = 0 */
+ "tosudiv0ax", /* tosudiveax, sreg = 0 */
+ "tosumod0ax", /* tosumodeax, sreg = 0 */
+ "tosxor0ax", /* tosxoreax, sreg = 0 */
+ "tosmoda0", /* tosmodax, x = 0 */
+ "tosmula0", /* tosmulax, x = 0 */
+ "tosumula0", /* tosumulax, x = 0 */
+ "tosnea0", /* tosneax, x = 0 */
+ "tosora0", /* tosorax, x = 0 */
+ "push1", /* pushax, x = 0, a = 1 */
+ "push2", /* pushax, x = 0, a = 2 */
+ "push3", /* pushax, x = 0, a = 3 */
+ "push4", /* pushax, x = 0, a = 4 */
+ "push5", /* pushax, x = 0, a = 5 */
+ "push6", /* pushax, x = 0, a = 6 */
+ "push7", /* pushax, x = 0, a = 7 */
+ "pushc0", /* pusha, a = 0 */
+ "pushc1", /* pusha, a = 1 */
+ "pushc2", /* pusha, a = 2 */
+ "tosrsuba0", /* tosrsubax, x = 0 */
+ "tosshla0", /* tosshlax, x = 0 */
+ "tosasla0", /* tosaslax, x = 0 */
+ "tosshra0", /* tosshrax, x = 0 */
+ "tosasra0", /* tosasrax, x = 0 */
+ "steax0sp", /* steaxsp, y = 0 */
+ "tossuba0", /* tossubax, x = 0 */
+ "subeq0sp", /* subeqysp, y = 0 */
+ "tosudiva0", /* tosudivax, x = 0 */
+ "tosugea0", /* tosugeax, x = 0 */
+ "tosugta0", /* tosugtax, x = 0 */
+ "tosulea0", /* tosuleax, x = 0 */
+ "tosulta0", /* tosultax, x = 0 */
+ "tosumoda0", /* tosumodax, x = 0 */
+ "tosxora0", /* tosxorax, x = 0 */
+ };
+
+ unsigned Changes = 0;
+ unsigned I;
+
+ /* Generate register info for the following step */
+ CS_GenRegInfo (S);
+
+ /* Walk over the entries */
+ I = 0;
+ while (I < CS_GetEntryCount (S)) {
+
+ /* Get next entry */
+ CodeEntry* E = CS_GetEntry (S, I);
+
+
+ /* Next entry */
+ ++I;
+
+ }
+
+ /* Free register info */
+ CS_FreeRegInfo (S);
+
+ /* Return the number of changes made */
+ return Changes;
+}
+#endif
+
+
+
+static unsigned OptSize2 (CodeSeg* S)
+/* Do size optimization by using shorter code sequences, even if this
+ * introduces relations between instructions. This step must be one of the
+ * last steps, because it makes further work much more difficult.
+ */
+{
+ unsigned Changes = 0;
+ unsigned I;
+
+ /* Generate register info for the following step */
+ CS_GenRegInfo (S);
+
+ /* Walk over the entries */
+ I = 0;
+ while (I < CS_GetEntryCount (S)) {
- /* Remember we had changes */
- ++OptChanges;
- } else {
+ /* Get next entry */
+ CodeEntry* E = CS_GetEntry (S, I);
- /* Next entry */
- ++I;
+ /* Assume we have no replacement */
+ CodeEntry* X = 0;
+
+ /* Check the instruction */
+ switch (E->OPC) {
+
+ case OP65_LDA:
+ if (CE_KnownImm (E)) {
+ short Val = (short) E->Num;
+ if (Val == E->RI->In.RegX) {
+ X = NewCodeEntry (OP65_TXA, AM65_IMP, 0, 0, E->LI);
+ } else if (Val == E->RI->In.RegY) {
+ X = NewCodeEntry (OP65_TYA, AM65_IMP, 0, 0, E->LI);
+ } else if (E->RI->In.RegA >= 0 && CPU >= CPU_65C02) {
+ if (Val == ((E->RI->In.RegA - 1) & 0xFF)) {
+ X = NewCodeEntry (OP65_DEA, AM65_IMP, 0, 0, E->LI);
+ } else if (Val == ((E->RI->In.RegA + 1) & 0xFF)) {
+ X = NewCodeEntry (OP65_INA, AM65_IMP, 0, 0, E->LI);
+ }
+ }
+ }
+ break;
+
+ case OP65_LDX:
+ if (CE_KnownImm (E)) {
+ short Val = (short) E->Num;
+ if (E->RI->In.RegX >= 0 && Val == ((E->RI->In.RegX - 1) & 0xFF)) {
+ X = NewCodeEntry (OP65_DEX, AM65_IMP, 0, 0, E->LI);
+ } else if (E->RI->In.RegX >= 0 && Val == ((E->RI->In.RegX + 1) & 0xFF)) {
+ X = NewCodeEntry (OP65_INX, AM65_IMP, 0, 0, E->LI);
+ } else if (Val == E->RI->In.RegA) {
+ X = NewCodeEntry (OP65_TAX, AM65_IMP, 0, 0, E->LI);
+ }
+ }
+ break;
+
+ case OP65_LDY:
+ if (CE_KnownImm (E)) {
+ short Val = (short) E->Num;
+ if (E->RI->In.RegY >= 0 && Val == ((E->RI->In.RegY - 1) & 0xFF)) {
+ X = NewCodeEntry (OP65_DEY, AM65_IMP, 0, 0, E->LI);
+ } else if (E->RI->In.RegY >= 0 && Val == ((E->RI->In.RegY + 1) & 0xFF)) {
+ X = NewCodeEntry (OP65_INY, AM65_IMP, 0, 0, E->LI);
+ } else if (Val == E->RI->In.RegA) {
+ X = NewCodeEntry (OP65_TAY, AM65_IMP, 0, 0, E->LI);
+ }
+ }
+ break;
+
+ default:
+ /* Avoid gcc warnings */
+ break;
}
+
+ /* Insert the replacement if we have one */
+ if (X) {
+ CS_InsertEntry (S, X, I+1);
+ CS_DelEntry (S, I);
+ ++Changes;
+ }
+
+ /* Next entry */
+ ++I;
+
}
+
+ /* Free register info */
+ CS_FreeRegInfo (S);
+
+ /* Return the number of changes made */
+ return Changes;
}
/*****************************************************************************/
-/* Code */
+/* struct OptFunc */
/*****************************************************************************/
+typedef struct OptFunc OptFunc;
+struct OptFunc {
+ unsigned (*Func) (CodeSeg*); /* Optimizer function */
+ const char* Name; /* Name of the function/group */
+ unsigned CodeSizeFactor; /* Code size factor for this opt func */
+ unsigned long TotalRuns; /* Total number of runs */
+ unsigned long LastRuns; /* Last number of runs */
+ unsigned long TotalChanges; /* Total number of changes */
+ unsigned long LastChanges; /* Last number of changes */
+ char Disabled; /* True if function disabled */
+};
+
+
+
+/*****************************************************************************/
+/* Code */
+/*****************************************************************************/
+
+
+
+/* Macro that builds a function description */
+#define OptFuncEntry(func) static OptFuncDesc D##func = { func, #func, 0 }
+
+/* A list of all the function descriptions */
+static OptFunc DOpt65C02Ind = { Opt65C02Ind, "Opt65C02Ind", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptAdd1 = { OptAdd1, "OptAdd1", 60, 0, 0, 0, 0, 0 };
+static OptFunc DOptAdd2 = { OptAdd2, "OptAdd2", 200, 0, 0, 0, 0, 0 };
+static OptFunc DOptAdd3 = { OptAdd3, "OptAdd3", 40, 0, 0, 0, 0, 0 };
+static OptFunc DOptBoolTrans = { OptBoolTrans, "OptBoolTrans", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptBranchDist = { OptBranchDist, "OptBranchDist", 0, 0, 0, 0, 0, 0 };
+static OptFunc DOptCmp1 = { OptCmp1, "OptCmp1", 85, 0, 0, 0, 0, 0 };
+static OptFunc DOptCmp2 = { OptCmp2, "OptCmp2", 75, 0, 0, 0, 0, 0 };
+static OptFunc DOptCmp3 = { OptCmp3, "OptCmp3", 75, 0, 0, 0, 0, 0 };
+static OptFunc DOptCmp4 = { OptCmp4, "OptCmp4", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptCmp5 = { OptCmp5, "OptCmp5", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptCmp6 = { OptCmp6, "OptCmp6", 85, 0, 0, 0, 0, 0 };
+static OptFunc DOptCmp7 = { OptCmp7, "OptCmp7", 50, 0, 0, 0, 0, 0 };
+static OptFunc DOptCondBranches = { OptCondBranches, "OptCondBranches", 80, 0, 0, 0, 0, 0 };
+static OptFunc DOptDeadCode = { OptDeadCode, "OptDeadCode", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptDeadJumps = { OptDeadJumps, "OptDeadJumps", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptDecouple = { OptDecouple, "OptDecouple", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptDupLoads = { OptDupLoads, "OptDupLoads", 0, 0, 0, 0, 0, 0 };
+static OptFunc DOptJumpCascades = { OptJumpCascades, "OptJumpCascades", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptJumpTarget = { OptJumpTarget, "OptJumpTarget", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptRTS = { OptRTS, "OptRTS", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptRTSJumps1 = { OptRTSJumps1, "OptRTSJumps1", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptRTSJumps2 = { OptRTSJumps2, "OptRTSJumps2", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptNegA1 = { OptNegA1, "OptNegA1", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptNegA2 = { OptNegA2, "OptNegA2", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptNegAX1 = { OptNegAX1, "OptNegAX1", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptNegAX2 = { OptNegAX2, "OptNegAX2", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptNegAX3 = { OptNegAX3, "OptNegAX3", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptNegAX4 = { OptNegAX4, "OptNegAX4", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad1 = { OptPtrLoad1, "OptPtrLoad1", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad2 = { OptPtrLoad2, "OptPtrLoad2", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad3 = { OptPtrLoad3, "OptPtrLoad3", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad4 = { OptPtrLoad4, "OptPtrLoad4", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad5 = { OptPtrLoad5, "OptPtrLoad5", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrLoad6 = { OptPtrLoad6, "OptPtrLoad6", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrStore1 = { OptPtrStore1, "OptPtrStore1", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptPtrStore2 = { OptPtrStore2, "OptPtrStore2", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptPush1 = { OptPush1, "OptPush1", 65, 0, 0, 0, 0, 0 };
+static OptFunc DOptShift1 = { OptShift1, "OptShift1", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptShift2 = { OptShift2, "OptShift2", 100, 0, 0, 0, 0, 0 };
+/*static OptFunc DOptSize1 = { OptSize1, "OptSize1", 100, 0, 0, 0, 0, 0 };*/
+static OptFunc DOptSize2 = { OptSize2, "OptSize2", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptStackOps = { OptStackOps, "OptStackOps", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptStoreLoad = { OptStoreLoad, "OptStoreLoad", 0, 0, 0, 0, 0, 0 };
+static OptFunc DOptSub1 = { OptSub1, "OptSub1", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptSub2 = { OptSub2, "OptSub2", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptTest1 = { OptTest1, "OptTest1", 100, 0, 0, 0, 0, 0 };
+static OptFunc DOptTransfers = { OptTransfers, "OptTransfers", 0, 0, 0, 0, 0, 0 };
+static OptFunc DOptUnusedLoads = { OptUnusedLoads, "OptUnusedLoads", 0, 0, 0, 0, 0, 0 };
+static OptFunc DOptUnusedStores = { OptUnusedStores, "OptUnusedStores", 0, 0, 0, 0, 0, 0 };
+
+
+/* Table containing all the steps in alphabetical order */
+static OptFunc* OptFuncs[] = {
+ &DOpt65C02Ind,
+ &DOptAdd1,
+ &DOptAdd2,
+ &DOptAdd3,
+ &DOptBoolTrans,
+ &DOptBranchDist,
+ &DOptCmp1,
+ &DOptCmp2,
+ &DOptCmp3,
+ &DOptCmp4,
+ &DOptCmp5,
+ &DOptCmp6,
+ &DOptCmp7,
+ &DOptCondBranches,
+ &DOptDeadCode,
+ &DOptDeadJumps,
+ &DOptDecouple,
+ &DOptDupLoads,
+ &DOptJumpCascades,
+ &DOptJumpTarget,
+ &DOptNegA1,
+ &DOptNegA2,
+ &DOptNegAX1,
+ &DOptNegAX2,
+ &DOptNegAX3,
+ &DOptNegAX4,
+ &DOptPtrLoad1,
+ &DOptPtrLoad2,
+ &DOptPtrLoad3,
+ &DOptPtrLoad4,
+ &DOptPtrLoad5,
+ &DOptPtrLoad6,
+ &DOptPtrStore1,
+ &DOptPtrStore2,
+ &DOptPush1,
+ &DOptRTS,
+ &DOptRTSJumps1,
+ &DOptRTSJumps2,
+ &DOptShift1,
+ &DOptShift2,
+ /*&DOptSize1,*/
+ &DOptSize2,
+ &DOptStackOps,
+ &DOptStoreLoad,
+ &DOptSub1,
+ &DOptSub2,
+ &DOptTest1,
+ &DOptTransfers,
+ &DOptUnusedLoads,
+ &DOptUnusedStores,
+};
+#define OPTFUNC_COUNT (sizeof(OptFuncs) / sizeof(OptFuncs[0]))
+
+
+
+static int CmpOptStep (const void* Key, const void* Func)
+/* Compare function for bsearch */
+{
+ return strcmp (Key, (*(const OptFunc**)Func)->Name);
+}
+
+
+
+static OptFunc* FindOptFunc (const char* Name)
+/* Find an optimizer step by name in the table and return a pointer. Return
+ * NULL if no such step is found.
+ */
+{
+ /* Search for the function in the list */
+ OptFunc** O = bsearch (Name, OptFuncs, OPTFUNC_COUNT, sizeof (OptFuncs[0]), CmpOptStep);
+ return O? *O : 0;
+}
+
+
+
+static OptFunc* GetOptFunc (const char* Name)
+/* Find an optimizer step by name in the table and return a pointer. Print an
+ * error and call AbEnd if not found.
+ */
+{
+ /* Search for the function in the list */
+ OptFunc* F = FindOptFunc (Name);
+ if (F == 0) {
+ /* Not found */
+ AbEnd ("Optimization step `%s' not found", Name);
+ }
+ return F;
+}
+
+
+
+void DisableOpt (const char* Name)
+/* Disable the optimization with the given name */
+{
+ if (strcmp (Name, "any") == 0) {
+ unsigned I;
+ for (I = 0; I < OPTFUNC_COUNT; ++I) {
+ OptFuncs[I]->Disabled = 1;
+ }
+ } else {
+ GetOptFunc(Name)->Disabled = 1;
+ }
+}
+
+
+
+void EnableOpt (const char* Name)
+/* Enable the optimization with the given name */
+{
+ if (strcmp (Name, "any") == 0) {
+ unsigned I;
+ for (I = 0; I < OPTFUNC_COUNT; ++I) {
+ OptFuncs[I]->Disabled = 0;
+ }
+ } else {
+ GetOptFunc(Name)->Disabled = 0;
+ }
+}
+
+
+
+void ListOptSteps (FILE* F)
+/* List all optimization steps */
+{
+ unsigned I;
+ for (I = 0; I < OPTFUNC_COUNT; ++I) {
+ fprintf (F, "%s\n", OptFuncs[I]->Name);
+ }
+}
+
+
+
+static void ReadOptStats (const char* Name)
+/* Read the optimizer statistics file */
+{
+ char Buf [256];
+ unsigned Lines;
+
+ /* Try to open the file */
+ FILE* F = fopen (Name, "r");
+ if (F == 0) {
+ /* Ignore the error */
+ return;
+ }
+
+ /* Read and parse the lines */
+ Lines = 0;
+ while (fgets (Buf, sizeof (Buf), F) != 0) {
+
+ char* B;
+ unsigned Len;
+ OptFunc* Func;
+
+ /* Fields */
+ char Name[32];
+ unsigned long TotalRuns;
+ unsigned long TotalChanges;
+
+ /* Count lines */
+ ++Lines;
+
+ /* Remove trailing white space including the line terminator */
+ B = Buf;
+ Len = strlen (B);
+ while (Len > 0 && IsSpace (B[Len-1])) {
+ --Len;
+ }
+ B[Len] = '\0';
+
+ /* Remove leading whitespace */
+ while (IsSpace (*B)) {
+ ++B;
+ }
+
+ /* Check for empty and comment lines */
+ if (*B == '\0' || *B == ';' || *B == '#') {
+ continue;
+ }
+
+ /* Parse the line */
+ if (sscanf (B, "%31s %lu %*u %lu %*u", Name, &TotalRuns, &TotalChanges) != 3) {
+ /* Syntax error */
+ continue;
+ }
+
+ /* Search for the optimizer step. */
+ Func = FindOptFunc (Name);
+ if (Func == 0) {
+ /* Not found */
+ continue;
+ }
+
+ /* Found the step, set the fields */
+ Func->TotalRuns = TotalRuns;
+ Func->TotalChanges = TotalChanges;
+
+ }
+
+ /* Close the file, ignore errors here. */
+ fclose (F);
+}
+
+
+
+static void WriteOptStats (const char* Name)
+/* Write the optimizer statistics file */
+{
+ unsigned I;
+
+ /* Try to open the file */
+ FILE* F = fopen (Name, "w");
+ if (F == 0) {
+ /* Ignore the error */
+ return;
+ }
+
+ /* Write the file */
+ for (I = 0; I < OPTFUNC_COUNT; ++I) {
+ const OptFunc* O = OptFuncs[I];
+ fprintf (F,
+ "%-20s %6lu %6lu %6lu %6lu\n",
+ O->Name,
+ O->TotalRuns,
+ O->LastRuns,
+ O->TotalChanges,
+ O->LastChanges);
+ }
+
+ /* Close the file, ignore errors here. */
+ fclose (F);
+}
+
+
+
+static unsigned RunOptFunc (CodeSeg* S, OptFunc* F, unsigned Max)
+/* Run one optimizer function Max times or until there are no more changes */
+{
+ unsigned Changes, C;
+
+ /* Don't run the function if it is disabled or if it is prohibited by the
+ * code size factor
+ */
+ if (F->Disabled || CodeSizeFactor < F->CodeSizeFactor) {
+ return 0;
+ }
+
+ /* Run this until there are no more changes */
+ Changes = 0;
+ do {
+
+ /* Run the function */
+ C = F->Func (S);
+ Changes += C;
+
+ /* Do statistics */
+ ++F->TotalRuns;
+ ++F->LastRuns;
+ F->TotalChanges += C;
+ F->LastChanges += C;
+
+ } while (--Max && C > 0);
+
+ /* Return the number of changes */
+ return Changes;
+}
+
+
+
+static unsigned RunOptGroup1 (CodeSeg* S)
+/* Run the first group of optimization steps. These steps translate known
+ * patterns emitted by the code generator into more optimal patterns. Order
+ * of the steps is important, because some of the steps done earlier cover
+ * the same patterns as later steps as subpatterns.
+ */
+{
+ unsigned Changes = 0;
+
+ Changes += RunOptFunc (S, &DOptPtrStore1, 1);
+ Changes += RunOptFunc (S, &DOptPtrStore2, 1);
+ Changes += RunOptFunc (S, &DOptPtrLoad1, 1);
+ Changes += RunOptFunc (S, &DOptPtrLoad2, 1);
+ Changes += RunOptFunc (S, &DOptPtrLoad3, 1);
+ Changes += RunOptFunc (S, &DOptPtrLoad4, 1);
+ Changes += RunOptFunc (S, &DOptPtrLoad5, 1);
+ Changes += RunOptFunc (S, &DOptNegAX1, 1);
+ Changes += RunOptFunc (S, &DOptNegAX2, 1);
+ Changes += RunOptFunc (S, &DOptNegAX3, 1);
+ Changes += RunOptFunc (S, &DOptNegAX4, 1);
+ Changes += RunOptFunc (S, &DOptAdd1, 1);
+ Changes += RunOptFunc (S, &DOptAdd2, 1);
+ Changes += RunOptFunc (S, &DOptShift1, 1);
+ Changes += RunOptFunc (S, &DOptShift2, 1);
+
+ /* Return the number of changes */
+ return Changes;
+}
+
+
+
+static unsigned RunOptGroup2 (CodeSeg* S)
+/* Run one group of optimization steps. This step involves just decoupling
+ * instructions by replacing them by instructions that do not depend on
+ * previous instructions. This makes it easier to find instructions that
+ * aren't used.
+ */
+{
+ unsigned Changes = 0;
+
+ Changes += RunOptFunc (S, &DOptDecouple, 1);
+
+ /* Return the number of changes */
+ return Changes;
+}
+
+
+
+static unsigned RunOptGroup3 (CodeSeg* S)
+/* Run one group of optimization steps. These steps depend on each other,
+ * that means that one step may allow another step to do additional work,
+ * so we will repeat the steps as long as we see any changes.
+ */
+{
+ unsigned Changes, C;
+
+ Changes = 0;
+ do {
+ C = 0;
+
+ C += RunOptFunc (S, &DOptPtrLoad6, 1);
+ C += RunOptFunc (S, &DOptNegA1, 1);
+ C += RunOptFunc (S, &DOptNegA2, 1);
+ C += RunOptFunc (S, &DOptSub1, 1);
+ C += RunOptFunc (S, &DOptSub2, 1);
+ C += RunOptFunc (S, &DOptAdd3, 1);
+ C += RunOptFunc (S, &DOptStackOps, 1);
+ C += RunOptFunc (S, &DOptJumpCascades, 1);
+ C += RunOptFunc (S, &DOptDeadJumps, 1);
+ C += RunOptFunc (S, &DOptRTS, 1);
+ C += RunOptFunc (S, &DOptDeadCode, 1);
+ C += RunOptFunc (S, &DOptJumpTarget, 1);
+ C += RunOptFunc (S, &DOptCondBranches, 1);
+ C += RunOptFunc (S, &DOptRTSJumps1, 1);
+ C += RunOptFunc (S, &DOptBoolTrans, 1);
+ C += RunOptFunc (S, &DOptCmp1, 1);
+ C += RunOptFunc (S, &DOptCmp2, 1);
+ C += RunOptFunc (S, &DOptCmp3, 1);
+ C += RunOptFunc (S, &DOptCmp4, 1);
+ C += RunOptFunc (S, &DOptCmp5, 1);
+ C += RunOptFunc (S, &DOptCmp6, 1);
+ C += RunOptFunc (S, &DOptCmp7, 1);
+ C += RunOptFunc (S, &DOptTest1, 1);
+ C += RunOptFunc (S, &DOptUnusedLoads, 1);
+ C += RunOptFunc (S, &DOptUnusedStores, 1);
+ C += RunOptFunc (S, &DOptDupLoads, 1);
+ C += RunOptFunc (S, &DOptStoreLoad, 1);
+ C += RunOptFunc (S, &DOptTransfers, 1);
+
+ Changes += C;
+
+ } while (C);
+
+ /* Return the number of changes */
+ return Changes;
+}
+
+
+
+static unsigned RunOptGroup4 (CodeSeg* S)
+/* 65C02 specific optimizations. */
+{
+ unsigned Changes = 0;
+
+ if (CPU >= CPU_65C02) {
+ /* Replace (zp),y by (zp) if Y is zero. If we have changes, run register
+ * load optimization again, since loads of Y may have become unnecessary.
+ */
+ unsigned C = RunOptFunc (S, &DOpt65C02Ind, 1);
+ Changes += C;
+ if (C) {
+ Changes += RunOptFunc (S, &DOptUnusedLoads, 1);
+ }
+ }
+
+ /* Return the number of changes */
+ return Changes;
+}
+
+
+
+static unsigned RunOptGroup5 (CodeSeg* S)
+/* Run another round of pattern replacements. These are done late, since there
+ * may be better replacements before.
+ */
+{
+ unsigned Changes = 0;
+
+ Changes += RunOptFunc (S, &DOptPush1, 1);
+
+ /* Return the number of changes */
+ return Changes;
+}
+
+
+
+static unsigned RunOptGroup6 (CodeSeg* S)
+/* The last group of optimization steps. Adjust branches, do size optimizations.
+ */
+{
+ unsigned Changes = 0;
+ unsigned C;
+
+ /* Optimize for size, that is replace operations by shorter ones, even
+ * if this does hinder further optimizations (no problem since we're
+ * done soon).
+ */
+ Changes += RunOptFunc (S, &DOptSize2, 1);
+
+ /* Run the jump target optimization again, since the size optimization
+ * above may have opened new oportunities.
+ */
+ Changes += RunOptFunc (S, &DOptJumpTarget, 5);
+
+ /* Adjust branch distances */
+ Changes += RunOptFunc (S, &DOptBranchDist, 3);
+
+ /* Replace conditional branches to RTS. If we had changes, we must run dead
+ * code elimination again, since the change may have introduced dead code.
+ */
+ C = RunOptFunc (S, &DOptRTSJumps2, 1);
+ Changes += C;
+ if (C) {
+ Changes += RunOptFunc (S, &DOptDeadCode, 1);
+ }
+
+ /* Return the number of changes */
+ return Changes;
+}
+
+
+
void RunOpt (CodeSeg* S)
/* Run the optimizer */
{
- printf ("Optimize\n");
+ const char* StatFileName;
- /* Repeat all steps until there are no more changes */
- do {
+ /* If we shouldn't run the optimizer, bail out */
+ if (!Optimize) {
+ return;
+ }
- /* Reset the number of changes */
- OptChanges = 0;
+ /* Check if we are requested to write optimizer statistics */
+ StatFileName = getenv ("CC65_OPTSTATS");
+ if (StatFileName) {
+ ReadOptStats (StatFileName);
+ }
- OptDeadJumps (S);
+ /* Print the name of the function we are working on */
+ if (S->Func) {
+ Print (stdout, 1, "Running optimizer for function `%s'\n", S->Func->Name);
+ } else {
+ Print (stdout, 1, "Running optimizer for global code segment\n");
+ }
+
+ /* Run groups of optimizations */
+ RunOptGroup1 (S);
+ RunOptGroup2 (S);
+ RunOptGroup3 (S);
+ RunOptGroup4 (S);
+ RunOptGroup5 (S);
+ RunOptGroup6 (S);
- } while (OptChanges > 0);
+ /* Write statistics */
+ if (StatFileName) {
+ WriteOptStats (StatFileName);
+ }
}
projects / cc65 / blobdiff