+static void CS_MoveLabelsToEntry (CodeSeg* S, CodeEntry* E)
+/* Move all labels from the label pool to the given entry and remove them
+ * from the pool.
+ */
+{
+ /* Transfer the labels if we have any */
+ unsigned I;
+ unsigned LabelCount = CollCount (&S->Labels);
+ for (I = 0; I < LabelCount; ++I) {
+
+ /* Get the label */
+ CodeLabel* L = CollAt (&S->Labels, I);
+
+ /* Attach it to the entry */
+ CE_AttachLabel (E, L);
+ }
+
+ /* Delete the transfered labels */
+ CollDeleteAll (&S->Labels);
+}
+
+
+
static void CS_MoveLabelsToPool (CodeSeg* S, CodeEntry* E)
/* Move the labels of the code entry E to the label pool of the code segment */
{
unsigned LabelCount = CE_GetLabelCount (E);
while (LabelCount--) {
- CodeLabel* L = CE_GetLabel (E, LabelCount);
+ CodeLabel* L = CE_GetLabel (E, LabelCount);
L->Owner = 0;
CollAppend (&S->Labels, L);
}
/* Add an entry to the given code segment */
{
/* Transfer the labels if we have any */
- unsigned I;
- unsigned LabelCount = CollCount (&S->Labels);
- for (I = 0; I < LabelCount; ++I) {
-
- /* Get the label */
- CodeLabel* L = CollAt (&S->Labels, I);
-
- /* Attach it to the entry */
- CE_AttachLabel (E, L);
- }
-
- /* Delete the transfered labels */
- CollDeleteAll (&S->Labels);
+ CS_MoveLabelsToEntry (S, E);
/* Add the entry to the list of code entries in this segment */
CollAppend (&S->Entries, E);
+void CS_MoveEntries (CodeSeg* S, unsigned Start, unsigned Count, unsigned NewPos)
+/* Move a range of entries from one position to another. Start is the index
+ * of the first entry to move, Count is the number of entries and NewPos is
+ * the index of the target entry. The entry with the index Start will later
+ * have the index NewPos. All entries with indices NewPos and above are
+ * moved to higher indices. If the code block is moved to the end of the
+ * current code, and if pending labels exist, these labels will get attached
+ * to the first instruction of the moved block (the first one after the
+ * current code end)
+ */
+{
+ /* If NewPos is at the end of the code segment, move any labels from the
+ * label pool to the first instruction of the moved range.
+ */
+ if (NewPos == CS_GetEntryCount (S)) {
+ CS_MoveLabelsToEntry (S, CS_GetEntry (S, Start));
+ }
+
+ /* Move the code block to the destination */
+ CollMoveMultiple (&S->Entries, Start, Count, NewPos);
+}
+
+
+
+struct CodeEntry* CS_GetPrevEntry (CodeSeg* S, unsigned Index)
+/* Get the code entry preceeding the one with the index Index. If there is no
+ * preceeding code entry, return NULL.
+ */
+{
+ if (Index == 0) {
+ /* This is the first entry */
+ return 0;
+ } else {
+ /* Previous entry available */
+ return CollAtUnchecked (&S->Entries, Index-1);
+ }
+}
+
+
+
struct CodeEntry* CS_GetNextEntry (CodeSeg* S, unsigned Index)
/* Get the code entry following the one with the index Index. If there is no
* following code entry, return NULL.
+void CS_FreeRegInfo (CodeSeg* S)
+/* Free register infos for all instructions */
+{
+ unsigned I;
+ for (I = 0; I < CS_GetEntryCount (S); ++I) {
+ CE_FreeRegInfo (CS_GetEntry(S, I));
+ }
+}
+
+
+
+void CS_GenRegInfo (CodeSeg* S)
+/* Generate register infos for all instructions */
+{
+ unsigned I;
+ RegContents Regs;
+ RegContents* CurrentRegs;
+ int WasJump;
+
+ /* Be sure to delete all register infos */
+ CS_FreeRegInfo (S);
+
+ /* On entry, the register contents are unknown */
+ RC_Invalidate (&Regs);
+ CurrentRegs = &Regs;
+
+ /* First pass. Walk over all insns an note just the changes from one
+ * insn to the next one.
+ */
+ WasJump = 0;
+ for (I = 0; I < CS_GetEntryCount (S); ++I) {
+
+ CodeEntry* P;
+
+ /* Get the next instruction */
+ CodeEntry* E = CollAtUnchecked (&S->Entries, I);
+
+ /* If the instruction has a label, we need some special handling */
+ unsigned LabelCount = CE_GetLabelCount (E);
+ if (LabelCount > 0) {
+
+ /* Loop over all entry points that jump here. If these entry
+ * points already have register info, check if all values are
+ * known and identical. If all values are identical, and the
+ * preceeding instruction was not an unconditional branch, check
+ * if the register value on exit of the preceeding instruction
+ * is also identical. If all these values are identical, the
+ * value of a register is known, otherwise it is unknown.
+ */
+ CodeLabel* Label = CE_GetLabel (E, 0);
+ unsigned Entry;
+ if (WasJump) {
+ /* Preceeding insn was an unconditional branch */
+ CodeEntry* J = CL_GetRef(Label, 0);
+ if (J->RI) {
+ Regs = J->RI->Out2;
+ } else {
+ RC_Invalidate (&Regs);
+ }
+ Entry = 1;
+ } else {
+ Regs = *CurrentRegs;
+ Entry = 0;
+ }
+
+ while (Entry < CL_GetRefCount (Label)) {
+ /* Get this entry */
+ CodeEntry* J = CL_GetRef (Label, Entry);
+ if (J->RI == 0) {
+ /* No register info for this entry, bail out */
+ RC_Invalidate (&Regs);
+ break;
+ }
+ if (J->RI->Out2.RegA != Regs.RegA) {
+ Regs.RegA = -1;
+ }
+ if (J->RI->Out2.RegX != Regs.RegX) {
+ Regs.RegX = -1;
+ }
+ if (J->RI->Out2.RegY != Regs.RegY) {
+ Regs.RegY = -1;
+ }
+ ++Entry;
+ }
+
+ /* Use this register info */
+ CurrentRegs = &Regs;
+
+ }
+
+ /* Generate register info for this instruction */
+ CE_GenRegInfo (E, CurrentRegs);
+
+ /* Remember for the next insn if this insn was an uncondition branch */
+ WasJump = (E->Info & OF_UBRA) != 0;
+
+ /* Output registers for this insn are input for the next */
+ CurrentRegs = &E->RI->Out;
+
+ /* If this insn is a branch on zero flag, we may have more info on
+ * register contents for one of both flow directions, but only if
+ * there is a previous instruction.
+ */
+ if ((E->Info & OF_ZBRA) != 0 && (P = CS_GetPrevEntry (S, I)) != 0) {
+
+ /* Get the branch condition */
+ bc_t BC = GetBranchCond (E->OPC);
+
+ /* Check the previous instruction */
+ switch (P->OPC) {
+
+ case OP65_ADC:
+ case OP65_AND:
+ case OP65_DEA:
+ case OP65_EOR:
+ case OP65_INA:
+ case OP65_LDA:
+ case OP65_ORA:
+ case OP65_PLA:
+ case OP65_SBC:
+ /* A is zero in one execution flow direction */
+ if (BC == BC_EQ) {
+ E->RI->Out2.RegA = 0;
+ } else {
+ E->RI->Out.RegA = 0;
+ }
+ break;
+
+ case OP65_CMP:
+ /* If this is an immidiate compare, the A register has
+ * the value of the compare later.
+ */
+ if (CE_KnownImm (P)) {
+ if (BC == BC_EQ) {
+ E->RI->Out2.RegA = (unsigned char)P->Num;
+ } else {
+ E->RI->Out.RegA = (unsigned char)P->Num;
+ }
+ }
+ break;
+
+ case OP65_CPX:
+ /* If this is an immidiate compare, the X register has
+ * the value of the compare later.
+ */
+ if (CE_KnownImm (P)) {
+ if (BC == BC_EQ) {
+ E->RI->Out2.RegX = (unsigned char)P->Num;
+ } else {
+ E->RI->Out.RegX = (unsigned char)P->Num;
+ }
+ }
+ break;
+
+ case OP65_CPY:
+ /* If this is an immidiate compare, the Y register has
+ * the value of the compare later.
+ */
+ if (CE_KnownImm (P)) {
+ if (BC == BC_EQ) {
+ E->RI->Out2.RegY = (unsigned char)P->Num;
+ } else {
+ E->RI->Out.RegY = (unsigned char)P->Num;
+ }
+ }
+ break;
+
+ case OP65_DEX:
+ case OP65_INX:
+ case OP65_LDX:
+ case OP65_PLX:
+ /* X is zero in one execution flow direction */
+ if (BC == BC_EQ) {
+ E->RI->Out2.RegX = 0;
+ } else {
+ E->RI->Out.RegX = 0;
+ }
+ break;
+
+ case OP65_DEY:
+ case OP65_INY:
+ case OP65_LDY:
+ case OP65_PLY:
+ /* X is zero in one execution flow direction */
+ if (BC == BC_EQ) {
+ E->RI->Out2.RegY = 0;
+ } else {
+ E->RI->Out.RegY = 0;
+ }
+ break;
+
+ case OP65_TAX:
+ case OP65_TXA:
+ /* If the branch is a beq, both A and X are zero at the
+ * branch target, otherwise they are zero at the next
+ * insn.
+ */
+ if (BC == BC_EQ) {
+ E->RI->Out2.RegA = E->RI->Out2.RegX = 0;
+ } else {
+ E->RI->Out.RegA = E->RI->Out.RegX = 0;
+ }
+ break;
+
+ case OP65_TAY:
+ case OP65_TYA:
+ /* If the branch is a beq, both A and Y are zero at the
+ * branch target, otherwise they are zero at the next
+ * insn.
+ */
+ if (BC == BC_EQ) {
+ E->RI->Out2.RegA = E->RI->Out2.RegY = 0;
+ } else {
+ E->RI->Out.RegA = E->RI->Out.RegY = 0;
+ }
+ break;
+
+ default:
+ break;
+
+ }
+ }
+ }
+}
+
+
projects / cc65 / blobdiff