#include "binarybuffer.h"
-static int cfi_register_commands(struct command_context_s *cmd_ctx);
-static int cfi_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
-static int cfi_erase(struct flash_bank_s *bank, int first, int last);
-static int cfi_protect(struct flash_bank_s *bank, int set, int first, int last);
-static int cfi_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset, uint32_t count);
-static int cfi_probe(struct flash_bank_s *bank);
-static int cfi_auto_probe(struct flash_bank_s *bank);
-static int cfi_protect_check(struct flash_bank_s *bank);
-static int cfi_info(struct flash_bank_s *bank, char *buf, int buf_size);
-
-//static int cfi_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
#define CFI_MAX_BUS_WIDTH 4
#define CFI_MAX_CHIP_WIDTH 4
/* defines internal maximum size for code fragment in cfi_intel_write_block() */
#define CFI_MAX_INTEL_CODESIZE 256
-flash_driver_t cfi_flash =
-{
- .name = "cfi",
- .register_commands = cfi_register_commands,
- .flash_bank_command = cfi_flash_bank_command,
- .erase = cfi_erase,
- .protect = cfi_protect,
- .write = cfi_write,
- .probe = cfi_probe,
- .auto_probe = cfi_auto_probe,
- .erase_check = default_flash_blank_check,
- .protect_check = cfi_protect_check,
- .info = cfi_info
-};
-
static cfi_unlock_addresses_t cfi_unlock_addresses[] =
{
[CFI_UNLOCK_555_2AA] = { .unlock1 = 0x555, .unlock2 = 0x2aa },
static void cfi_fixup_atmel_reversed_erase_regions(flash_bank_t *flash, void *param);
/* fixup after reading cmdset 0002 primary query table */
-static cfi_fixup_t cfi_0002_fixups[] = {
+static const cfi_fixup_t cfi_0002_fixups[] = {
{CFI_MFR_SST, 0x00D4, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
{CFI_MFR_SST, 0x00D5, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
{CFI_MFR_SST, 0x00D6, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
};
/* fixup after reading cmdset 0001 primary query table */
-static cfi_fixup_t cfi_0001_fixups[] = {
+static const cfi_fixup_t cfi_0001_fixups[] = {
{0, 0, NULL, NULL}
};
-static void cfi_fixup(flash_bank_t *bank, cfi_fixup_t *fixups)
+static void cfi_fixup(flash_bank_t *bank, const cfi_fixup_t *fixups)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- cfi_fixup_t *f;
+ const cfi_fixup_t *f;
for (f = fixups; f->fixup; f++)
{
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- if(cfi_info->x16_as_x8) offset*=2;
+ if (cfi_info->x16_as_x8) offset *= 2;
/* while the sector list isn't built, only accesses to sector 0 work */
if (sector == 0)
cfi_flash_bank_t *cfi_info = bank->driver_priv;
uint8_t data[CFI_MAX_BUS_WIDTH * 2];
- if(cfi_info->x16_as_x8)
+ if (cfi_info->x16_as_x8)
{
uint8_t i;
- for(i=0;i<2;i++)
- target_read_memory(target, flash_address(bank, sector, offset+i), bank->bus_width, 1,
- &data[i*bank->bus_width] );
+ for (i = 0;i < 2;i++)
+ target_read_memory(target, flash_address(bank, sector, offset + i), bank->bus_width, 1,
+ &data[i*bank->bus_width]);
}
else
target_read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 2, data);
cfi_flash_bank_t *cfi_info = bank->driver_priv;
uint8_t data[CFI_MAX_BUS_WIDTH * 4];
- if(cfi_info->x16_as_x8)
+ if (cfi_info->x16_as_x8)
{
uint8_t i;
- for(i=0;i<4;i++)
- target_read_memory(target, flash_address(bank, sector, offset+i), bank->bus_width, 1,
- &data[i*bank->bus_width] );
+ for (i = 0;i < 4;i++)
+ target_read_memory(target, flash_address(bank, sector, offset + i), bank->bus_width, 1,
+ &data[i*bank->bus_width]);
}
else
target_read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 4, data);
if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I'))
{
cfi_command(bank, 0xf0, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0xff, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
pri_ext->suspend_cmd_support = cfi_query_u8(bank, 0, cfi_info->pri_addr + 9);
pri_ext->blk_status_reg_mask = cfi_query_u16(bank, 0, cfi_info->pri_addr + 0xa);
- LOG_DEBUG("feature_support: 0x%x, suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
+ LOG_DEBUG("feature_support: 0x%" PRIx32 ", suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x",
+ pri_ext->feature_support,
+ pri_ext->suspend_cmd_support,
+ pri_ext->blk_status_reg_mask);
pri_ext->vcc_optimal = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xc);
pri_ext->vpp_optimal = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xd);
if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I'))
{
cfi_command(bank, 0xf0, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
if ((atmel_pri_ext.pri[0] != 'P') || (atmel_pri_ext.pri[1] != 'R') || (atmel_pri_ext.pri[2] != 'I'))
{
cfi_command(bank, 0xf0, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
buf += printed;
buf_size -= printed;
- printed = snprintf(buf, buf_size, "feature_support: 0x%x, suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
+ printed = snprintf(buf, buf_size, "feature_support: 0x%" PRIx32 ", suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
buf += printed;
buf_size -= printed;
/* flash_bank cfi <base> <size> <chip_width> <bus_width> <target#> [options]
*/
-static int cfi_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+FLASH_BANK_COMMAND_HANDLER(cfi_flash_bank_command)
{
cfi_flash_bank_t *cfi_info;
int i;
return ERROR_FLASH_BANK_INVALID;
}
- if ((strtoul(args[4], NULL, 0) > CFI_MAX_CHIP_WIDTH)
- || (strtoul(args[3], NULL, 0) > CFI_MAX_BUS_WIDTH))
+ uint16_t chip_width, bus_width;
+ COMMAND_PARSE_NUMBER(u16, args[3], bus_width);
+ COMMAND_PARSE_NUMBER(u16, args[4], chip_width);
+
+ if ((chip_width > CFI_MAX_CHIP_WIDTH)
+ || (bus_width > CFI_MAX_BUS_WIDTH))
{
LOG_ERROR("chip and bus width have to specified in bytes");
return ERROR_FLASH_BANK_INVALID;
for (i = first; i <= last; i++)
{
cfi_command(bank, 0x20, command);
- if((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0xd0, command);
- if((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
else
{
cfi_command(bank, 0xff, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
- LOG_ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
+ LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32 , i, bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
for (i = first; i <= last; i++)
{
cfi_command(bank, 0xaa, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0x55, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0x80, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0xaa, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0x55, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0x30, command);
- if((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
else
{
cfi_command(bank, 0xf0, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
- LOG_ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
+ LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32, i, bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
- switch(cfi_info->pri_id)
+ switch (cfi_info->pri_id)
{
case 1:
case 3:
for (i = first; i <= last; i++)
{
cfi_command(bank, 0x60, command);
- LOG_DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
- if((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ LOG_DEBUG("address: 0x%4.4" PRIx32 ", command: 0x%4.4" PRIx32, flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
+ if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
if (set)
{
cfi_command(bank, 0x01, command);
- LOG_DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
- if((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ LOG_DEBUG("address: 0x%4.4" PRIx32 ", command: 0x%4.4" PRIx32 , flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
+ if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
else
{
cfi_command(bank, 0xd0, command);
- LOG_DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
- if((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ LOG_DEBUG("address: 0x%4.4" PRIx32 ", command: 0x%4.4" PRIx32, flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
+ if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
uint8_t block_status;
/* read block lock bit, to verify status */
cfi_command(bank, 0x90, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
{
LOG_ERROR("couldn't change block lock status (set = %i, block_status = 0x%2.2x)", set, block_status);
cfi_command(bank, 0x70, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_intel_clear_status_register(bank);
cfi_command(bank, 0x60, command);
- if((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0x01, command);
- if((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
- switch(cfi_info->pri_id)
+ switch (cfi_info->pri_id)
{
case 1:
case 3:
static void cfi_fix_code_endian(target_t *target, uint8_t *dest, const uint32_t *src, uint32_t count)
{
uint32_t i;
- for (i=0; i< count; i++)
+ for (i = 0; i< count; i++)
{
target_buffer_set_u32(target, dest, *src);
- dest+=4;
+ dest += 4;
src++;
}
}
armv4_5_info.core_state = ARMV4_5_STATE_ARM;
/* If we are setting up the write_algorith, we need target_code_src */
- /* if not we only need target_code_size. */
- /* */
- /* However, we don't want to create multiple code paths, so we */
- /* do the unecessary evaluation of target_code_src, which the */
- /* compiler will probably nicely optimize away if not needed */
+ /* if not we only need target_code_size. */
+
+ /* However, we don't want to create multiple code paths, so we */
+ /* do the unecessary evaluation of target_code_src, which the */
+ /* compiler will probably nicely optimize away if not needed */
/* prepare algorithm code for target endian */
switch (bank->bus_width)
/* flash write code */
if (!cfi_info->write_algorithm)
{
- if ( target_code_size > sizeof(target_code) )
+ if (target_code_size > sizeof(target_code))
{
LOG_WARNING("Internal error - target code buffer to small. Increase CFI_MAX_INTEL_CODESIZE and recompile.");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
busy_pattern_val = cfi_command_val(bank, 0x80);
error_pattern_val = cfi_command_val(bank, 0x7e);
- LOG_INFO("Using target buffer at 0x%08x and of size 0x%04x", source->address, buffer_size );
+ LOG_INFO("Using target buffer at 0x%08" PRIx32 " and of size 0x%04" PRIx32, source->address, buffer_size);
/* Programming main loop */
while (count > 0)
uint32_t thisrun_count = (count > buffer_size) ? buffer_size : count;
uint32_t wsm_error;
- if((retval = target_write_buffer(target, source->address, thisrun_count, buffer)) != ERROR_OK)
+ if ((retval = target_write_buffer(target, source->address, thisrun_count, buffer)) != ERROR_OK)
{
goto cleanup;
}
buf_set_u32(reg_params[5].value, 0, 32, busy_pattern_val);
buf_set_u32(reg_params[6].value, 0, 32, error_pattern_val);
- LOG_INFO("Write 0x%04x bytes to flash at 0x%08x", thisrun_count, address );
+ LOG_INFO("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32 , thisrun_count, address);
/* Execute algorithm, assume breakpoint for last instruction */
retval = target_run_algorithm(target, 0, NULL, 7, reg_params,
0xeafffffe /* b 81ac <sp_16_done> */
};
+ static const uint32_t word_16_code_dq7only[] = {
+ /* <sp_16_code>: */
+ 0xe0d050b2, /* ldrh r5, [r0], #2 */
+ 0xe1c890b0, /* strh r9, [r8] */
+ 0xe1cab0b0, /* strh r11, [r10] */
+ 0xe1c830b0, /* strh r3, [r8] */
+ 0xe1c150b0, /* strh r5, [r1] */
+ 0xe1a00000, /* nop (mov r0,r0) */
+ /* */
+ /* <sp_16_busy>: */
+ 0xe1d160b0, /* ldrh r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe2177080, /* ands r7, #0x80 */
+ 0x1afffffb, /* bne 8168 <sp_16_busy> */
+ /* */
+ 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
+ 0x03a05080, /* moveq r5, #128 ; 0x80 */
+ 0x0a000001, /* beq 81ac <sp_16_done> */
+ 0xe2811002, /* add r1, r1, #2 ; 0x2 */
+ 0xeafffff0, /* b 8158 <sp_16_code> */
+ /* */
+ /* 000081ac <sp_16_done>: */
+ 0xeafffffe /* b 81ac <sp_16_done> */
+ };
+
static const uint32_t word_8_code[] = {
/* 000081b0 <sp_16_code_end>: */
0xe4d05001, /* ldrb r5, [r0], #1 */
armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
armv4_5_info.core_state = ARMV4_5_STATE_ARM;
+ int target_code_size;
+ const uint32_t *target_code_src;
+
+ switch (bank->bus_width)
+ {
+ case 1 :
+ target_code_src = word_8_code;
+ target_code_size = sizeof(word_8_code);
+ break;
+ case 2 :
+ /* Check for DQ5 support */
+ if( cfi_info->status_poll_mask & (1 << 5) )
+ {
+ target_code_src = word_16_code;
+ target_code_size = sizeof(word_16_code);
+ }
+ else
+ {
+ /* No DQ5 support. Use DQ7 DATA# polling only. */
+ target_code_src = word_16_code_dq7only;
+ target_code_size = sizeof(word_16_code_dq7only);
+ }
+ break;
+ case 4 :
+ target_code_src = word_32_code;
+ target_code_size = sizeof(word_32_code);
+ break;
+ default:
+ LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+
/* flash write code */
if (!cfi_info->write_algorithm)
{
uint8_t *target_code;
- int target_code_size;
- const uint32_t *src;
/* convert bus-width dependent algorithm code to correct endiannes */
- switch (bank->bus_width)
- {
- case 1:
- src = word_8_code;
- target_code_size = sizeof(word_8_code);
- break;
- case 2:
- src = word_16_code;
- target_code_size = sizeof(word_16_code);
- break;
- case 4:
- src = word_32_code;
- target_code_size = sizeof(word_32_code);
- break;
- default:
- LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
- return ERROR_FLASH_OPERATION_FAILED;
- }
target_code = malloc(target_code_size);
- cfi_fix_code_endian(target, target_code, src, target_code_size / 4);
+ cfi_fix_code_endian(target, target_code, target_code_src, target_code_size / 4);
/* allocate working area */
- retval=target_alloc_working_area(target, target_code_size,
+ retval = target_alloc_working_area(target, target_code_size,
&cfi_info->write_algorithm);
if (retval != ERROR_OK)
{
}
/* write algorithm code to working area */
- if((retval = target_write_buffer(target, cfi_info->write_algorithm->address,
+ if ((retval = target_write_buffer(target, cfi_info->write_algorithm->address,
target_code_size, target_code)) != ERROR_OK)
{
free(target_code);
retval = target_run_algorithm(target, 0, NULL, 10, reg_params,
cfi_info->write_algorithm->address,
- cfi_info->write_algorithm->address + ((24 * 4) - 4),
+ cfi_info->write_algorithm->address + ((target_code_size) - 4),
10000, &armv4_5_info);
status = buf_get_u32(reg_params[5].value, 0, 32);
if ((retval != ERROR_OK) || (retvaltemp != ERROR_OK) || status != 0x80)
{
- LOG_DEBUG("status: 0x%x", status);
+ LOG_DEBUG("status: 0x%" PRIx32 , status);
exit_code = ERROR_FLASH_OPERATION_FAILED;
break;
}
count -= thisrun_count;
}
- target_free_working_area(target, source);
+ target_free_all_working_areas(target);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
cfi_intel_clear_status_register(bank);
cfi_command(bank, 0x40, command);
- if((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
- if((retval = target_write_memory(target, address, bank->bus_width, 1, word)) != ERROR_OK)
+ if ((retval = target_write_memory(target, address, bank->bus_width, 1, word)) != ERROR_OK)
{
return retval;
}
if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->word_write_timeout_max)) != 0x80)
{
cfi_command(bank, 0xff, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
- LOG_ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
+ LOG_ERROR("couldn't write word at base 0x%" PRIx32 ", address %" PRIx32 , bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
/* Check for valid range */
if (address & buffermask)
{
- LOG_ERROR("Write address at base 0x%x, address %x not aligned to 2^%d boundary", bank->base, address, cfi_info->max_buf_write_size);
+ LOG_ERROR("Write address at base 0x%" PRIx32 ", address %" PRIx32 " not aligned to 2^%d boundary",
+ bank->base, address, cfi_info->max_buf_write_size);
return ERROR_FLASH_OPERATION_FAILED;
}
- switch(bank->chip_width)
+ switch (bank->chip_width)
{
case 4 : bufferwsize = buffersize / 4; break;
case 2 : bufferwsize = buffersize / 2; break;
/* Check for valid size */
if (wordcount > bufferwsize)
{
- LOG_ERROR("Number of data words %d exceeds available buffersize %d", wordcount, buffersize);
+ LOG_ERROR("Number of data words %" PRId32 " exceeds available buffersize %" PRId32 , wordcount, buffersize);
return ERROR_FLASH_OPERATION_FAILED;
}
/* Initiate buffer operation _*/
cfi_command(bank, 0xE8, command);
- if((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->buf_write_timeout_max)) != 0x80)
{
cfi_command(bank, 0xff, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
- LOG_ERROR("couldn't start buffer write operation at base 0x%x, address %x", bank->base, address);
+ LOG_ERROR("couldn't start buffer write operation at base 0x%" PRIx32 ", address %" PRIx32 , bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
/* Write buffer wordcount-1 and data words */
cfi_command(bank, bufferwsize-1, command);
- if((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
- if((retval = target_write_memory(target, address, bank->bus_width, bufferwsize, word)) != ERROR_OK)
+ if ((retval = target_write_memory(target, address, bank->bus_width, bufferwsize, word)) != ERROR_OK)
{
return retval;
}
/* Commit write operation */
cfi_command(bank, 0xd0, command);
- if((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->buf_write_timeout_max)) != 0x80)
{
cfi_command(bank, 0xff, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
- LOG_ERROR("Buffer write at base 0x%x, address %x failed.", bank->base, address);
+ LOG_ERROR("Buffer write at base 0x%" PRIx32 ", address %" PRIx32 " failed.", bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
uint8_t command[8];
cfi_command(bank, 0xaa, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0x55, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0xa0, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
- if((retval = target_write_memory(target, address, bank->bus_width, 1, word)) != ERROR_OK)
+ if ((retval = target_write_memory(target, address, bank->bus_width, 1, word)) != ERROR_OK)
{
return retval;
}
if (cfi_spansion_wait_status_busy(bank, 1000 * (1 << cfi_info->word_write_timeout_max)) != ERROR_OK)
{
cfi_command(bank, 0xf0, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
- LOG_ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
+ LOG_ERROR("couldn't write word at base 0x%" PRIx32 ", address %" PRIx32 , bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
/* Check for valid range */
if (address & buffermask)
{
- LOG_ERROR("Write address at base 0x%x, address %x not aligned to 2^%d boundary", bank->base, address, cfi_info->max_buf_write_size);
+ LOG_ERROR("Write address at base 0x%" PRIx32 ", address %" PRIx32 " not aligned to 2^%d boundary", bank->base, address, cfi_info->max_buf_write_size);
return ERROR_FLASH_OPERATION_FAILED;
}
- switch(bank->chip_width)
+ switch (bank->chip_width)
{
case 4 : bufferwsize = buffersize / 4; break;
case 2 : bufferwsize = buffersize / 2; break;
/* Check for valid size */
if (wordcount > bufferwsize)
{
- LOG_ERROR("Number of data words %d exceeds available buffersize %d", wordcount, buffersize);
+ LOG_ERROR("Number of data words %" PRId32 " exceeds available buffersize %" PRId32, wordcount, buffersize);
return ERROR_FLASH_OPERATION_FAILED;
}
// Unlock
cfi_command(bank, 0xaa, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0x55, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
// Buffer load command
cfi_command(bank, 0x25, command);
- if((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
/* Write buffer wordcount-1 and data words */
cfi_command(bank, bufferwsize-1, command);
- if((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
- if((retval = target_write_memory(target, address, bank->bus_width, bufferwsize, word)) != ERROR_OK)
+ if ((retval = target_write_memory(target, address, bank->bus_width, bufferwsize, word)) != ERROR_OK)
{
return retval;
}
/* Commit write operation */
cfi_command(bank, 0x29, command);
- if((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
if (cfi_spansion_wait_status_busy(bank, 1000 * (1 << cfi_info->word_write_timeout_max)) != ERROR_OK)
{
cfi_command(bank, 0xf0, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
- LOG_ERROR("couldn't write block at base 0x%x, address %x, size %x", bank->base, address, bufferwsize);
+ LOG_ERROR("couldn't write block at base 0x%" PRIx32 ", address %" PRIx32 ", size %" PRIx32 , bank->base, address, bufferwsize);
return ERROR_FLASH_OPERATION_FAILED;
}
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- switch(cfi_info->pri_id)
+ switch (cfi_info->pri_id)
{
case 1:
case 3:
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- switch(cfi_info->pri_id)
+ switch (cfi_info->pri_id)
{
case 1:
case 3:
write_p = address & ~(bank->bus_width - 1);
if ((align = address - write_p) != 0)
{
- LOG_INFO("Fixup %d unaligned head bytes", align );
+ LOG_INFO("Fixup %d unaligned head bytes", align);
for (i = 0; i < bank->bus_width; i++)
current_word[i] = 0;
for (i = 0; i < align; ++i, ++copy_p)
{
uint8_t byte;
- if((retval = target_read_memory(target, copy_p, 1, 1, &byte)) != ERROR_OK)
+ if ((retval = target_read_memory(target, copy_p, 1, 1, &byte)) != ERROR_OK)
{
return retval;
}
for (; (count == 0) && (i < bank->bus_width); ++i, ++copy_p)
{
uint8_t byte;
- if((retval = target_read_memory(target, copy_p, 1, 1, &byte)) != ERROR_OK)
+ if ((retval = target_read_memory(target, copy_p, 1, 1, &byte)) != ERROR_OK)
{
return retval;
}
/* handle blocks of bus_size aligned bytes */
blk_count = count & ~(bank->bus_width - 1); /* round down, leave tail bytes */
- switch(cfi_info->pri_id)
+ switch (cfi_info->pri_id)
{
/* try block writes (fails without working area) */
case 1:
uint32_t buffermask = buffersize-1;
uint32_t bufferwsize;
- switch(bank->chip_width)
+ switch (bank->chip_width)
{
case 4 : bufferwsize = buffersize / 4; break;
case 2 : bufferwsize = buffersize / 2; break;
int fallback;
if ((write_p & 0xff) == 0)
{
- LOG_INFO("Programming at %08x, count %08x bytes remaining", write_p, count);
+ LOG_INFO("Programming at %08" PRIx32 ", count %08" PRIx32 " bytes remaining", write_p, count);
}
fallback = 1;
if ((bufferwsize > 0) && (count >= buffersize) && !(write_p & buffermask))
buffer += buffersize;
write_p += buffersize;
count -= buffersize;
- fallback=0;
+ fallback = 0;
}
}
/* try the slow way? */
/* return to read array mode, so we can read from flash again for padding */
cfi_command(bank, 0xf0, current_word);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0xff, current_word);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word)) != ERROR_OK)
{
return retval;
}
/* handle unaligned tail bytes */
if (count > 0)
{
- LOG_INFO("Fixup %d unaligned tail bytes", count );
+ LOG_INFO("Fixup %" PRId32 " unaligned tail bytes", count);
copy_p = write_p;
for (i = 0; i < bank->bus_width; i++)
for (; i < bank->bus_width; ++i, ++copy_p)
{
uint8_t byte;
- if((retval = target_read_memory(target, copy_p, 1, 1, &byte)) != ERROR_OK)
+ if ((retval = target_read_memory(target, copy_p, 1, 1, &byte)) != ERROR_OK)
{
return retval;
}
/* return to read array mode */
cfi_command(bank, 0xf0, current_word);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word)) != ERROR_OK)
{
return retval;
}
pri_ext->_unlock2 = unlock_addresses->unlock2;
}
+
+static int cfi_query_string(struct flash_bank_s *bank, int address)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ target_t *target = bank->target;
+ int retval;
+ uint8_t command[8];
+
+ cfi_command(bank, 0x98, command);
+ if ((retval = target_write_memory(target, flash_address(bank, 0, address), bank->bus_width, 1, command)) != ERROR_OK)
+ {
+ return retval;
+ }
+
+ cfi_info->qry[0] = cfi_query_u8(bank, 0, 0x10);
+ cfi_info->qry[1] = cfi_query_u8(bank, 0, 0x11);
+ cfi_info->qry[2] = cfi_query_u8(bank, 0, 0x12);
+
+ LOG_DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]);
+
+ if ((cfi_info->qry[0] != 'Q') || (cfi_info->qry[1] != 'R') || (cfi_info->qry[2] != 'Y'))
+ {
+ cfi_command(bank, 0xf0, command);
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ {
+ return retval;
+ }
+ cfi_command(bank, 0xff, command);
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ {
+ return retval;
+ }
+ LOG_ERROR("Could not probe bank: no QRY");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ return ERROR_OK;
+}
+
static int cfi_probe(struct flash_bank_s *bank)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
/* switch to read identifier codes mode ("AUTOSELECT") */
cfi_command(bank, 0xaa, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, unlock1), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, unlock1), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0x55, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, unlock2), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, unlock2), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0x90, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, unlock1), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, unlock1), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
if (bank->chip_width == 1)
{
uint8_t manufacturer, device_id;
- if((retval = target_read_u8(target, flash_address(bank, 0, 0x00), &manufacturer)) != ERROR_OK)
+ if ((retval = target_read_u8(target, flash_address(bank, 0, 0x00), &manufacturer)) != ERROR_OK)
{
return retval;
}
- if((retval = target_read_u8(target, flash_address(bank, 0, 0x01), &device_id)) != ERROR_OK)
+ if ((retval = target_read_u8(target, flash_address(bank, 0, 0x01), &device_id)) != ERROR_OK)
{
return retval;
}
}
else if (bank->chip_width == 2)
{
- if((retval = target_read_u16(target, flash_address(bank, 0, 0x00), &cfi_info->manufacturer)) != ERROR_OK)
+ if ((retval = target_read_u16(target, flash_address(bank, 0, 0x00), &cfi_info->manufacturer)) != ERROR_OK)
{
return retval;
}
- if((retval = target_read_u16(target, flash_address(bank, 0, 0x02), &cfi_info->device_id)) != ERROR_OK)
+ if ((retval = target_read_u16(target, flash_address(bank, 0, 0x01), &cfi_info->device_id)) != ERROR_OK)
{
return retval;
}
LOG_INFO("Flash Manufacturer/Device: 0x%04x 0x%04x", cfi_info->manufacturer, cfi_info->device_id);
/* switch back to read array mode */
cfi_command(bank, 0xf0, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x00), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x00), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0xff, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x00), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x00), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
*/
if (cfi_info->not_cfi == 0)
{
+ int retval;
+
/* enter CFI query mode
* according to JEDEC Standard No. 68.01,
* a single bus sequence with address = 0x55, data = 0x98 should put
*
* SST flashes clearly violate this, and we will consider them incompatbile for now
*/
- cfi_command(bank, 0x98, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command)) != ERROR_OK)
- {
- return retval;
- }
-
- cfi_info->qry[0] = cfi_query_u8(bank, 0, 0x10);
- cfi_info->qry[1] = cfi_query_u8(bank, 0, 0x11);
- cfi_info->qry[2] = cfi_query_u8(bank, 0, 0x12);
-
- LOG_DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]);
- if ((cfi_info->qry[0] != 'Q') || (cfi_info->qry[1] != 'R') || (cfi_info->qry[2] != 'Y'))
+ retval = cfi_query_string(bank, 0x55);
+ if (retval != ERROR_OK)
{
- cfi_command(bank, 0xf0, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
- {
- return retval;
- }
- cfi_command(bank, 0xff, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
- {
- return retval;
- }
- LOG_ERROR("Could not probe bank: no QRY");
- return ERROR_FLASH_BANK_INVALID;
+ /*
+ * Spansion S29WS-N CFI query fix is to try 0x555 if 0x55 fails. Should
+ * be harmless enough:
+ *
+ * http://www.infradead.org/pipermail/linux-mtd/2005-September/013618.html
+ */
+ LOG_USER("Try workaround w/0x555 instead of 0x55 to get QRY.");
+ retval = cfi_query_string(bank, 0x555);
}
+ if (retval != ERROR_OK)
+ return retval;
cfi_info->pri_id = cfi_query_u16(bank, 0, 0x13);
cfi_info->pri_addr = cfi_query_u16(bank, 0, 0x15);
(1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
(1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
- cfi_info->dev_size = 1<<cfi_query_u8(bank, 0, 0x27);
+ cfi_info->dev_size = 1 << cfi_query_u8(bank, 0, 0x27);
cfi_info->interface_desc = cfi_query_u16(bank, 0, 0x28);
cfi_info->max_buf_write_size = cfi_query_u16(bank, 0, 0x2a);
cfi_info->num_erase_regions = cfi_query_u8(bank, 0, 0x2c);
- LOG_DEBUG("size: 0x%x, interface desc: %i, max buffer write size: %x", cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size));
+ LOG_DEBUG("size: 0x%" PRIx32 ", interface desc: %i, max buffer write size: %x", cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size));
if (cfi_info->num_erase_regions)
{
for (i = 0; i < cfi_info->num_erase_regions; i++)
{
cfi_info->erase_region_info[i] = cfi_query_u32(bank, 0, 0x2d + (4 * i));
- LOG_DEBUG("erase region[%i]: %i blocks of size 0x%x", i, (cfi_info->erase_region_info[i] & 0xffff) + 1, (cfi_info->erase_region_info[i] >> 16) * 256);
+ LOG_DEBUG("erase region[%i]: %" PRIu32 " blocks of size 0x%" PRIx32 "",
+ i,
+ (cfi_info->erase_region_info[i] & 0xffff) + 1,
+ (cfi_info->erase_region_info[i] >> 16) * 256);
}
}
else
/* We need to read the primary algorithm extended query table before calculating
* the sector layout to be able to apply fixups
*/
- switch(cfi_info->pri_id)
+ switch (cfi_info->pri_id)
{
/* Intel command set (standard and extended) */
case 0x0001:
* we use both reset commands, as some Intel flashes fail to recognize the 0xF0 command
*/
cfi_command(bank, 0xf0, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0xff, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
} /* end CFI case */
/* apply fixups depending on the primary command set */
- switch(cfi_info->pri_id)
+ switch (cfi_info->pri_id)
{
/* Intel command set (standard and extended) */
case 0x0001:
if ((cfi_info->dev_size * bank->bus_width / bank->chip_width) != bank->size)
{
- LOG_WARNING("configuration specifies 0x%x size, but a 0x%x size flash was found", bank->size, cfi_info->dev_size);
+ LOG_WARNING("configuration specifies 0x%" PRIx32 " size, but a 0x%" PRIx32 " size flash was found", bank->size, cfi_info->dev_size);
}
if (cfi_info->num_erase_regions == 0)
sector++;
}
}
- if (offset != cfi_info->dev_size)
+ if (offset != (cfi_info->dev_size * bank->bus_width / bank->chip_width))
{
- LOG_WARNING("CFI size is 0x%x, but total sector size is 0x%x", cfi_info->dev_size, offset);
+ LOG_WARNING("CFI size is 0x%" PRIx32 ", but total sector size is 0x%" PRIx32 "", \
+ (cfi_info->dev_size * bank->bus_width / bank->chip_width), offset);
}
}
return ERROR_FLASH_OPERATION_FAILED;
cfi_command(bank, 0x90, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
int i;
cfi_command(bank, 0xaa, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0x55, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
cfi_command(bank, 0x90, command);
- if((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
+ if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
}
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
- switch(cfi_info->pri_id)
+ switch (cfi_info->pri_id)
{
case 1:
case 3:
buf += printed;
buf_size -= printed;
- printed = snprintf(buf, buf_size, "size: 0x%x, interface desc: %i, max buffer write size: %x\n",
+ printed = snprintf(buf, buf_size, "size: 0x%" PRIx32 ", interface desc: %i, max buffer write size: %x\n",
cfi_info->dev_size,
cfi_info->interface_desc,
1 << cfi_info->max_buf_write_size);
buf += printed;
buf_size -= printed;
- switch(cfi_info->pri_id)
+ switch (cfi_info->pri_id)
{
case 1:
case 3:
return ERROR_OK;
}
+
+flash_driver_t cfi_flash = {
+ .name = "cfi",
+ .register_commands = &cfi_register_commands,
+ .flash_bank_command = &cfi_flash_bank_command,
+ .erase = &cfi_erase,
+ .protect = &cfi_protect,
+ .write = &cfi_write,
+ .probe = &cfi_probe,
+ .auto_probe = &cfi_auto_probe,
+ .erase_check = &default_flash_blank_check,
+ .protect_check = &cfi_protect_check,
+ .info = &cfi_info,
+ };
projects / openocd / blobdiff