* Copyright (C) 2011 sleep(5) ltd *
* tomas@sleepfive.com *
* *
+ * Copyright (C) 2012 by Christopher D. Kilgour *
+ * techie at whiterocker.com *
+ * *
+ * Copyright (C) 2013 Nemui Trinomius *
+ * nemuisan_kawausogasuki@live.jp *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#endif
#include "imp.h"
-#include "helper/binarybuffer.h"
-
-struct kinetis_flash_bank {
- uint32_t nvm_start;
+#include <helper/binarybuffer.h>
+#include <target/algorithm.h>
+#include <target/armv7m.h>
+
+/*
+ * Implementation Notes
+ *
+ * The persistent memories in the Kinetis chip families K10 through
+ * K70 are all manipulated with the Flash Memory Module. Some
+ * variants call this module the FTFE, others call it the FTFL. To
+ * indicate that both are considered here, we use FTFX.
+ *
+ * Within the module, according to the chip variant, the persistent
+ * memory is divided into what Freescale terms Program Flash, FlexNVM,
+ * and FlexRAM. All chip variants have Program Flash. Some chip
+ * variants also have FlexNVM and FlexRAM, which always appear
+ * together.
+ *
+ * A given Kinetis chip may have 2 or 4 blocks of flash. Here we map
+ * each block to a separate bank. Each block size varies by chip and
+ * may be determined by the read-only SIM_FCFG1 register. The sector
+ * size within each bank/block varies by the chip granularity as
+ * described below.
+ *
+ * Kinetis offers four different of flash granularities applicable
+ * across the chip families. The granularity is apparently reflected
+ * by at least the reference manual suffix. For example, for chip
+ * MK60FN1M0VLQ12, reference manual K60P144M150SF3RM ends in "SF3RM",
+ * where the "3" indicates there are four flash blocks with 4kiB
+ * sectors. All possible granularities are indicated below.
+ *
+ * The first half of the flash (1 or 2 blocks, depending on the
+ * granularity) is always Program Flash and always starts at address
+ * 0x00000000. The "PFLSH" flag, bit 23 of the read-only SIM_FCFG2
+ * register, determines whether the second half of the flash is also
+ * Program Flash or FlexNVM+FlexRAM. When PFLSH is set, the second
+ * half of flash is Program Flash and is contiguous in the memory map
+ * from the first half. When PFLSH is clear, the second half of flash
+ * is FlexNVM and always starts at address 0x10000000. FlexRAM, which
+ * is also present when PFLSH is clear, always starts at address
+ * 0x14000000.
+ *
+ * The Flash Memory Module provides a register set where flash
+ * commands are loaded to perform flash operations like erase and
+ * program. Different commands are available depending on whether
+ * Program Flash or FlexNVM/FlexRAM is being manipulated. Although
+ * the commands used are quite consistent between flash blocks, the
+ * parameters they accept differ according to the flash granularity.
+ * Some Kinetis chips have different granularity between Program Flash
+ * and FlexNVM/FlexRAM, so flash command arguments may differ between
+ * blocks in the same chip.
+ *
+ */
+
+static const struct {
+ unsigned pflash_sector_size_bytes;
+ unsigned nvm_sector_size_bytes;
+ unsigned num_blocks;
+} kinetis_flash_params[4] = {
+ { 1<<10, 1<<10, 2 },
+ { 2<<10, 1<<10, 2 },
+ { 2<<10, 2<<10, 2 },
+ { 4<<10, 4<<10, 4 }
};
-static int kinetis_get_master_bank(struct flash_bank *bank,
- struct flash_bank **master_bank)
-{
- *master_bank = get_flash_bank_by_name_noprobe(bank->name);
- if (*master_bank == NULL) {
- LOG_ERROR("master flash bank '%s' does not exist",
- (char *)bank->driver_priv);
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- return ERROR_OK;
-}
-
-static int kinetis_update_bank_info(struct flash_bank *bank)
-{
- int result;
- struct flash_bank *master_bank;
-
- result = kinetis_get_master_bank(bank, &master_bank);
-
- if (result != ERROR_OK)
- return result;
+/* Addressess */
+#define FLEXRAM 0x14000000
+#define FTFx_FSTAT 0x40020000
+#define FTFx_FCNFG 0x40020001
+#define FTFx_FCCOB3 0x40020004
+#define FTFx_FPROT3 0x40020010
+#define SIM_SDID 0x40048024
+#define SIM_FCFG1 0x4004804c
+#define SIM_FCFG2 0x40048050
+
+/* Commands */
+#define FTFx_CMD_BLOCKSTAT 0x00
+#define FTFx_CMD_SECTSTAT 0x01
+#define FTFx_CMD_LWORDPROG 0x06
+#define FTFx_CMD_SECTERASE 0x09
+#define FTFx_CMD_SECTWRITE 0x0b
+#define FTFx_CMD_SETFLEXRAM 0x81
+#define FTFx_CMD_MASSERASE 0x44
+
+/* The Kinetis K series uses the following SDID layout :
+ * Bit 31-16 : 0
+ * Bit 15-12 : REVID
+ * Bit 11-7 : DIEID
+ * Bit 6-4 : FAMID
+ * Bit 3-0 : PINID
+ *
+ * The Kinetis KL series uses the following SDID layout :
+ * Bit 31-28 : FAMID
+ * Bit 27-24 : SUBFAMID
+ * Bit 23-20 : SERIESID
+ * Bit 19-16 : SRAMSIZE
+ * Bit 15-12 : REVID
+ * Bit 6-4 : Reserved (0)
+ * Bit 3-0 : PINID
+ *
+ * SERIESID should be 1 for the KL-series so we assume that if
+ * bits 31-16 are 0 then it's a K-series MCU.
+ */
+
+#define KINETIS_SDID_K_SERIES_MASK 0x0000FFFF
+
+#define KINETIS_SDID_DIEID_MASK 0x00000F80
+#define KINETIS_SDID_DIEID_K_A 0x00000100
+#define KINETIS_SDID_DIEID_K_B 0x00000200
+#define KINETIS_SDID_DIEID_KL 0x00000000
+
+/* We can't rely solely on the FAMID field to determine the MCU
+ * type since some FAMID values identify multiple MCUs with
+ * different flash sector sizes (K20 and K22 for instance).
+ * Therefore we combine it with the DIEID bits which may possibly
+ * break if Freescale bumps the DIEID for a particular MCU. */
+#define KINETIS_K_SDID_TYPE_MASK 0x00000FF0
+#define KINETIS_K_SDID_K10_M50 0x00000000
+#define KINETIS_K_SDID_K10_M72 0x00000080
+#define KINETIS_K_SDID_K10_M100 0x00000100
+#define KINETIS_K_SDID_K10_M120 0x00000180
+#define KINETIS_K_SDID_K11 0x00000220
+#define KINETIS_K_SDID_K12 0x00000200
+#define KINETIS_K_SDID_K20_M50 0x00000010
+#define KINETIS_K_SDID_K20_M72 0x00000090
+#define KINETIS_K_SDID_K20_M100 0x00000110
+#define KINETIS_K_SDID_K20_M120 0x00000190
+#define KINETIS_K_SDID_K21_M50 0x00000230
+#define KINETIS_K_SDID_K21_M120 0x00000330
+#define KINETIS_K_SDID_K22_M50 0x00000210
+#define KINETIS_K_SDID_K22_M120 0x00000310
+#define KINETIS_K_SDID_K30_M72 0x000000A0
+#define KINETIS_K_SDID_K30_M100 0x00000120
+#define KINETIS_K_SDID_K40_M72 0x000000B0
+#define KINETIS_K_SDID_K40_M100 0x00000130
+#define KINETIS_K_SDID_K50_M72 0x000000E0
+#define KINETIS_K_SDID_K51_M72 0x000000F0
+#define KINETIS_K_SDID_K53 0x00000170
+#define KINETIS_K_SDID_K60_M100 0x00000140
+#define KINETIS_K_SDID_K60_M150 0x000001C0
+#define KINETIS_K_SDID_K70_M150 0x000001D0
+
+#define KINETIS_KL_SDID_SERIESID_MASK 0x00F00000
+#define KINETIS_KL_SDID_SERIESID_KL 0x00100000
- /* update the info we do not have */
- bank->size = master_bank->size;
- bank->chip_width = master_bank->chip_width;
- bank->bus_width = master_bank->bus_width;
- bank->num_sectors = master_bank->num_sectors;
- bank->sectors = master_bank->sectors;
-
- return ERROR_OK;
-}
+struct kinetis_flash_bank {
+ unsigned granularity;
+ unsigned bank_ordinal;
+ uint32_t sector_size;
+ uint32_t protection_size;
+ uint32_t klxx;
+
+ uint32_t sim_sdid;
+ uint32_t sim_fcfg1;
+ uint32_t sim_fcfg2;
+
+ enum {
+ FC_AUTO = 0,
+ FC_PFLASH,
+ FC_FLEX_NVM,
+ FC_FLEX_RAM,
+ } flash_class;
+};
FLASH_BANK_COMMAND_HANDLER(kinetis_flash_bank_command)
{
return ERROR_OK;
}
-static int kinetis_protect(struct flash_bank *bank, int set, int first,
- int last)
+/* Kinetis Program-LongWord Microcodes */
+static const uint8_t kinetis_flash_write_code[] = {
+ /* Params:
+ * r0 - workarea buffer
+ * r1 - target address
+ * r2 - wordcount
+ * Clobbered:
+ * r4 - tmp
+ * r5 - tmp
+ * r6 - tmp
+ * r7 - tmp
+ */
+
+ /* .L1: */
+ /* for(register uint32_t i=0;i<wcount;i++){ */
+ 0x04, 0x1C, /* mov r4, r0 */
+ 0x00, 0x23, /* mov r3, #0 */
+ /* .L2: */
+ 0x0E, 0x1A, /* sub r6, r1, r0 */
+ 0xA6, 0x19, /* add r6, r4, r6 */
+ 0x93, 0x42, /* cmp r3, r2 */
+ 0x16, 0xD0, /* beq .L9 */
+ /* .L5: */
+ /* while((FTFx_FSTAT&FTFA_FSTAT_CCIF_MASK) != FTFA_FSTAT_CCIF_MASK){}; */
+ 0x0B, 0x4D, /* ldr r5, .L10 */
+ 0x2F, 0x78, /* ldrb r7, [r5] */
+ 0x7F, 0xB2, /* sxtb r7, r7 */
+ 0x00, 0x2F, /* cmp r7, #0 */
+ 0xFA, 0xDA, /* bge .L5 */
+ /* FTFx_FSTAT = FTFA_FSTAT_ACCERR_MASK|FTFA_FSTAT_FPVIOL_MASK|FTFA_FSTAT_RDCO */
+ 0x70, 0x27, /* mov r7, #112 */
+ 0x2F, 0x70, /* strb r7, [r5] */
+ /* FTFx_FCCOB3 = faddr; */
+ 0x09, 0x4F, /* ldr r7, .L10+4 */
+ 0x3E, 0x60, /* str r6, [r7] */
+ 0x06, 0x27, /* mov r7, #6 */
+ /* FTFx_FCCOB0 = 0x06; */
+ 0x08, 0x4E, /* ldr r6, .L10+8 */
+ 0x37, 0x70, /* strb r7, [r6] */
+ /* FTFx_FCCOB7 = *pLW; */
+ 0x80, 0xCC, /* ldmia r4!, {r7} */
+ 0x08, 0x4E, /* ldr r6, .L10+12 */
+ 0x37, 0x60, /* str r7, [r6] */
+ /* FTFx_FSTAT = FTFA_FSTAT_CCIF_MASK; */
+ 0x80, 0x27, /* mov r7, #128 */
+ 0x2F, 0x70, /* strb r7, [r5] */
+ /* .L4: */
+ /* while((FTFx_FSTAT&FTFA_FSTAT_CCIF_MASK) != FTFA_FSTAT_CCIF_MASK){}; */
+ 0x2E, 0x78, /* ldrb r6, [r5] */
+ 0x77, 0xB2, /* sxtb r7, r6 */
+ 0x00, 0x2F, /* cmp r7, #0 */
+ 0xFB, 0xDA, /* bge .L4 */
+ 0x01, 0x33, /* add r3, r3, #1 */
+ 0xE4, 0xE7, /* b .L2 */
+ /* .L9: */
+ 0x00, 0xBE, /* bkpt #0 */
+ /* .L10: */
+ 0x00, 0x00, 0x02, 0x40, /* .word 1073872896 */
+ 0x04, 0x00, 0x02, 0x40, /* .word 1073872900 */
+ 0x07, 0x00, 0x02, 0x40, /* .word 1073872903 */
+ 0x08, 0x00, 0x02, 0x40, /* .word 1073872904 */
+};
+
+/* Program LongWord Block Write */
+static int kinetis_write_block(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t wcount)
{
- int result;
- struct flash_bank *master_bank;
+ struct target *target = bank->target;
+ uint32_t buffer_size = 2048; /* Default minimum value */
+ struct working_area *write_algorithm;
+ struct working_area *source;
+ uint32_t address = bank->base + offset;
+ struct reg_param reg_params[3];
+ struct armv7m_algorithm armv7m_info;
+ int retval = ERROR_OK;
+
+ /* Params:
+ * r0 - workarea buffer
+ * r1 - target address
+ * r2 - wordcount
+ * Clobbered:
+ * r4 - tmp
+ * r5 - tmp
+ * r6 - tmp
+ * r7 - tmp
+ */
+
+ /* Increase buffer_size if needed */
+ if (buffer_size < (target->working_area_size/2))
+ buffer_size = (target->working_area_size/2);
+
+ LOG_INFO("Kinetis: FLASH Write ...");
+
+ /* check code alignment */
+ if (offset & 0x1) {
+ LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
- result = kinetis_get_master_bank(bank, &master_bank);
+ /* allocate working area with flash programming code */
+ if (target_alloc_working_area(target, sizeof(kinetis_flash_write_code),
+ &write_algorithm) != ERROR_OK) {
+ LOG_WARNING("no working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
- if (result != ERROR_OK)
- return result;
+ retval = target_write_buffer(target, write_algorithm->address,
+ sizeof(kinetis_flash_write_code), kinetis_flash_write_code);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* memory buffer */
+ while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK) {
+ buffer_size /= 4;
+ if (buffer_size <= 256) {
+ /* free working area, write algorithm already allocated */
+ target_free_working_area(target, write_algorithm);
+
+ LOG_WARNING("No large enough working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+ }
+
+ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+ armv7m_info.core_mode = ARM_MODE_THREAD;
+
+ init_reg_param(®_params[0], "r0", 32, PARAM_OUT); /* *pLW (*buffer) */
+ init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* faddr */
+ init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* number of words to program */
+
+ /* write code buffer and use Flash programming code within kinetis */
+ /* Set breakpoint to 0 with time-out of 1000 ms */
+ while (wcount > 0) {
+ uint32_t thisrun_count = (wcount > (buffer_size / 4)) ? (buffer_size / 4) : wcount;
+
+ retval = target_write_buffer(target, source->address, thisrun_count * 4, buffer);
+ if (retval != ERROR_OK)
+ break;
+
+ buf_set_u32(reg_params[0].value, 0, 32, source->address);
+ buf_set_u32(reg_params[1].value, 0, 32, address);
+ buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
+ retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
+ write_algorithm->address, 0, 100000, &armv7m_info);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Error executing kinetis Flash programming algorithm");
+ retval = ERROR_FLASH_OPERATION_FAILED;
+ break;
+ }
+
+ buffer += thisrun_count * 4;
+ address += thisrun_count * 4;
+ wcount -= thisrun_count;
+ }
+
+ target_free_working_area(target, source);
+ target_free_working_area(target, write_algorithm);
+
+ destroy_reg_param(®_params[0]);
+ destroy_reg_param(®_params[1]);
+ destroy_reg_param(®_params[2]);
+
+ return retval;
+}
+
+static int kinetis_protect(struct flash_bank *bank, int set, int first, int last)
+{
LOG_WARNING("kinetis_protect not supported yet");
+ /* FIXME: TODO */
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- return ERROR_OK;
+ return ERROR_FLASH_BANK_INVALID;
}
static int kinetis_protect_check(struct flash_bank *bank)
{
- int result;
- struct flash_bank *master_bank;
- uint8_t buffer[4];
- uint32_t fprot, psize, psec;
- int i, b;
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- result = kinetis_get_master_bank(bank, &master_bank);
+ if (kinfo->flash_class == FC_PFLASH) {
+ int result;
+ uint8_t buffer[4];
+ uint32_t fprot, psec;
+ int i, b;
- if (result != ERROR_OK)
- return result;
-
- /* read protection register FTFL_FPROT */
- result = target_read_memory(bank->target, 0x40020010, 1, 4, buffer);
-
- if (result != ERROR_OK)
- return result;
-
- fprot = target_buffer_get_u32(bank->target, buffer);
+ /* read protection register */
+ result = target_read_memory(bank->target, FTFx_FPROT3, 1, 4, buffer);
- /* every bit protect 1/32 of the full flash */
- psize = bank->size / 32;
- psec = 0;
- b = 0;
-
- for (i = 0; i < bank->num_sectors; i++) {
- if ((fprot >> b) & 1)
- bank->sectors[i].is_protected = 0;
- else
- bank->sectors[i].is_protected = 1;
-
- psec += bank->sectors[i].size;
+ if (result != ERROR_OK)
+ return result;
- if (psec >= psize) {
- psec = 0;
- b++;
+ fprot = target_buffer_get_u32(bank->target, buffer);
+
+ /*
+ * Every bit protects 1/32 of the full flash (not necessarily
+ * just this bank), but we enforce the bank ordinals for
+ * PFlash to start at zero.
+ */
+ b = kinfo->bank_ordinal * (bank->size / kinfo->protection_size);
+ for (psec = 0, i = 0; i < bank->num_sectors; i++) {
+ if ((fprot >> b) & 1)
+ bank->sectors[i].is_protected = 0;
+ else
+ bank->sectors[i].is_protected = 1;
+
+ psec += bank->sectors[i].size;
+
+ if (psec >= kinfo->protection_size) {
+ psec = 0;
+ b++;
+ }
}
+ } else {
+ LOG_ERROR("Protection checks for FlexNVM not yet supported");
+ return ERROR_FLASH_BANK_INVALID;
}
return ERROR_OK;
}
-static int kinetis_ftfl_command(struct flash_bank *bank, uint32_t w0,
- uint32_t w1, uint32_t w2)
+static int kinetis_ftfx_command(struct flash_bank *bank, uint8_t fcmd, uint32_t faddr,
+ uint8_t fccob4, uint8_t fccob5, uint8_t fccob6, uint8_t fccob7,
+ uint8_t fccob8, uint8_t fccob9, uint8_t fccoba, uint8_t fccobb,
+ uint8_t *ftfx_fstat)
{
- uint8_t buffer[12];
+ uint8_t command[12] = {faddr & 0xff, (faddr >> 8) & 0xff, (faddr >> 16) & 0xff, fcmd,
+ fccob7, fccob6, fccob5, fccob4,
+ fccobb, fccoba, fccob9, fccob8};
int result, i;
+ uint8_t buffer;
/* wait for done */
for (i = 0; i < 50; i++) {
result =
- target_read_memory(bank->target, 0x40020000, 1, 1, buffer);
+ target_read_memory(bank->target, FTFx_FSTAT, 1, 1, &buffer);
if (result != ERROR_OK)
return result;
- if (buffer[0] & 0x80)
+ if (buffer & 0x80)
break;
- buffer[0] = 0x00;
+ buffer = 0x00;
}
- if (buffer[0] != 0x80) {
+ if (buffer != 0x80) {
/* reset error flags */
- buffer[0] = 0x30;
+ buffer = 0x30;
result =
- target_write_memory(bank->target, 0x40020000, 1, 1, buffer);
+ target_write_memory(bank->target, FTFx_FSTAT, 1, 1, &buffer);
if (result != ERROR_OK)
return result;
}
- target_buffer_set_u32(bank->target, buffer, w0);
- target_buffer_set_u32(bank->target, buffer + 4, w1);
- target_buffer_set_u32(bank->target, buffer + 8, w2);
-
- result = target_write_memory(bank->target, 0x40020004, 4, 3, buffer);
+ result = target_write_memory(bank->target, FTFx_FCCOB3, 4, 3, command);
if (result != ERROR_OK)
return result;
/* start command */
- buffer[0] = 0x80;
- result = target_write_memory(bank->target, 0x40020000, 1, 1, buffer);
+ buffer = 0x80;
+ result = target_write_memory(bank->target, FTFx_FSTAT, 1, 1, &buffer);
if (result != ERROR_OK)
return result;
/* wait for done */
- for (i = 0; i < 50; i++) {
+ for (i = 0; i < 240; i++) { /* Need longtime for "Mass Erase" Command Nemui Changed */
result =
- target_read_memory(bank->target, 0x40020000, 1, 1, buffer);
+ target_read_memory(bank->target, FTFx_FSTAT, 1, 1, ftfx_fstat);
if (result != ERROR_OK)
return result;
- if (buffer[0] & 0x80)
+ if (*ftfx_fstat & 0x80)
break;
-
- buffer[0] = 0x00;
}
- if (buffer[0] != 0x80) {
+ if ((*ftfx_fstat & 0xf0) != 0x80) {
LOG_ERROR
- ("ftfl command failed FSTAT: %02X W0: %08X W1: %08X W2: %08X",
- buffer[0], w0, w1, w2);
-
+ ("ftfx command failed FSTAT: %02X FCCOB: %02X%02X%02X%02X %02X%02X%02X%02X %02X%02X%02X%02X",
+ *ftfx_fstat, command[3], command[2], command[1], command[0],
+ command[7], command[6], command[5], command[4],
+ command[11], command[10], command[9], command[8]);
return ERROR_FLASH_OPERATION_FAILED;
}
return ERROR_OK;
}
-static int kinetis_erase(struct flash_bank *bank, int first, int last)
+static int kinetis_mass_erase(struct flash_bank *bank)
{
- struct flash_bank *master_bank;
- int result, i;
- uint32_t w0 = 0, w1 = 0, w2 = 0;
+ int result;
+ uint8_t ftfx_fstat;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- result = kinetis_get_master_bank(bank, &master_bank);
-
+ /* check if whole bank is blank */
+ LOG_INFO("Execute Erase All Blocks");
+ /* set command and sector address */
+ result = kinetis_ftfx_command(bank, FTFx_CMD_MASSERASE, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
+ /* Anyway Result, write FSEC to unsecure forcely */
+ /* if (result != ERROR_OK)
+ return result;*/
+
+ /* Write to MCU security status unsecure in Flash security byte(for Kinetis-L need) */
+ LOG_INFO("Write to MCU security status unsecure Anyway!");
+ uint8_t padding[4] = {0xFE, 0xFF, 0xFF, 0xFF}; /* Write 0xFFFFFFFE */
+
+ result = kinetis_ftfx_command(bank, FTFx_CMD_LWORDPROG, (bank->base + 0x0000040C),
+ padding[3], padding[2], padding[1], padding[0],
+ 0, 0, 0, 0, &ftfx_fstat);
if (result != ERROR_OK)
- return result;
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ return ERROR_OK;
+}
+
+static int kinetis_erase(struct flash_bank *bank, int first, int last)
+{
+ int result, i;
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
if ((first > bank->num_sectors) || (last > bank->num_sectors))
return ERROR_FLASH_OPERATION_FAILED;
+ if ((first == 0) && (last == (bank->num_sectors - 1)))
+ return kinetis_mass_erase(bank);
+
+ /*
+ * FIXME: TODO: use the 'Erase Flash Block' command if the
+ * requested erase is PFlash or NVM and encompasses the entire
+ * block. Should be quicker.
+ */
for (i = first; i <= last; i++) {
+ uint8_t ftfx_fstat;
/* set command and sector address */
- w0 = (0x09 << 24) | bank->sectors[i].offset;
-
- result = kinetis_ftfl_command(bank, w0, w1, w2);
+ result = kinetis_ftfx_command(bank, FTFx_CMD_SECTERASE, bank->base + bank->sectors[i].offset,
+ 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
if (result != ERROR_OK) {
LOG_WARNING("erase sector %d failed", i);
return ERROR_OK;
}
-static int kinetis_write(struct flash_bank *bank, uint8_t *buffer,
- uint32_t offset, uint32_t count)
+static int kinetis_write(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t count)
{
- struct flash_bank *master_bank;
- unsigned int i, result, fallback = 0, nvm = 0;
+ unsigned int i, result, fallback = 0;
uint8_t buf[8];
- uint32_t wc, w0 = 0, w1 = 0, w2 = 0;
- struct kinetis_flash_bank *kbank = (struct kinetis_flash_bank *)
- bank->driver_priv;
+ uint32_t wc;
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
+ uint8_t *new_buffer = NULL;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- result = kinetis_get_master_bank(bank, &master_bank);
+ if (kinfo->klxx) {
+ /* fallback to longword write */
+ fallback = 1;
+ LOG_WARNING("Kinetis L Series supports Program Longword execution only.");
+ LOG_DEBUG("flash write into PFLASH @08%" PRIX32, offset);
- if (result != ERROR_OK)
- return result;
-
- if (offset >= kbank->nvm_start)
- nvm = 1;
+ } else if (kinfo->flash_class == FC_FLEX_NVM) {
+ uint8_t ftfx_fstat;
- if (!nvm && (offset + count) > kbank->nvm_start) {
- /* we could flash this in two goes, but if the segment
- spans across the pflash/nvm boundary, something is probably
- not right.
- */
- LOG_ERROR("Segment spans NVM boundary");
- return ERROR_FLASH_DST_OUT_OF_BANK;
- }
-
- if (nvm) {
- LOG_DEBUG("flash write into NVM @%08X", offset);
+ LOG_DEBUG("flash write into FlexNVM @%08" PRIX32, offset);
/* make flex ram available */
- w0 = (0x81 << 24) | 0x00ff0000;
-
- result = kinetis_ftfl_command(bank, w0, w1, w2);
+ result = kinetis_ftfx_command(bank, FTFx_CMD_SETFLEXRAM, 0x00ff0000, 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
if (result != ERROR_OK)
return ERROR_FLASH_OPERATION_FAILED;
/* check if ram ready */
- result = target_read_memory(bank->target, 0x40020001, 1, 1, buf);
+ result = target_read_memory(bank->target, FTFx_FCNFG, 1, 1, buf);
if (result != ERROR_OK)
return result;
/* fallback to longword write */
fallback = 1;
- LOG_WARNING("ram not ready, fallback to slow longword write (FCNFG: %02X)",
- buf[0]);
+ LOG_WARNING("ram not ready, fallback to slow longword write (FCNFG: %02X)", buf[0]);
}
} else {
- LOG_DEBUG("flash write into PFLASH @08%X", offset);
+ LOG_DEBUG("flash write into PFLASH @08%" PRIX32, offset);
}
/* program section command */
if (fallback == 0) {
- for (i = 0; i < count; i += (2 * 1024)) {
- wc = 512;
-
- if ((count - i) < (2 * 1024)) {
- wc = count - i;
- wc /= 4;
+ /*
+ * Kinetis uses different terms for the granularity of
+ * sector writes, e.g. "phrase" or "128 bits". We use
+ * the generic term "chunk". The largest possible
+ * Kinetis "chunk" is 16 bytes (128 bits).
+ */
+ unsigned prog_section_chunk_bytes = kinfo->sector_size >> 8;
+ /* assume the NVM sector size is half the FlexRAM size */
+ unsigned prog_size_bytes = MIN(kinfo->sector_size,
+ kinetis_flash_params[kinfo->granularity].nvm_sector_size_bytes);
+ for (i = 0; i < count; i += prog_size_bytes) {
+ uint8_t residual_buffer[16];
+ uint8_t ftfx_fstat;
+ uint32_t section_count = prog_size_bytes / prog_section_chunk_bytes;
+ uint32_t residual_wc = 0;
+
+ /*
+ * Assume the word count covers an entire
+ * sector.
+ */
+ wc = prog_size_bytes / 4;
+
+ /*
+ * If bytes to be programmed are less than the
+ * full sector, then determine the number of
+ * full-words to program, and put together the
+ * residual buffer so that a full "section"
+ * may always be programmed.
+ */
+ if ((count - i) < prog_size_bytes) {
+ /* number of bytes to program beyond full section */
+ unsigned residual_bc = (count-i) % prog_section_chunk_bytes;
+
+ /* number of complete words to copy directly from buffer */
+ wc = (count - i) / 4;
+
+ /* number of total sections to write, including residual */
+ section_count = DIV_ROUND_UP((count-i), prog_section_chunk_bytes);
+
+ /* any residual bytes delivers a whole residual section */
+ residual_wc = (residual_bc ? prog_section_chunk_bytes : 0)/4;
+
+ /* clear residual buffer then populate residual bytes */
+ (void) memset(residual_buffer, 0xff, prog_section_chunk_bytes);
+ (void) memcpy(residual_buffer, &buffer[i+4*wc], residual_bc);
}
- LOG_DEBUG("write section @ %08X with length %d",
- offset + i, wc * 4);
+ LOG_DEBUG("write section @ %08" PRIX32 " with length %" PRIu32 " bytes",
+ offset + i, (uint32_t)wc*4);
- /* write data to flexram */
- result =
- target_write_memory(bank->target, 0x14000000, 4, wc,
+ /* write data to flexram as whole-words */
+ result = target_write_memory(bank->target, FLEXRAM, 4, wc,
buffer + i);
if (result != ERROR_OK) {
LOG_ERROR("target_write_memory failed");
-
return result;
}
- /* execute section command */
- w0 = (0x0b << 24) | (offset + i);
- w1 = (256 << 16);
+ /* write the residual words to the flexram */
+ if (residual_wc) {
+ result = target_write_memory(bank->target,
+ FLEXRAM+4*wc,
+ 4, residual_wc,
+ residual_buffer);
+
+ if (result != ERROR_OK) {
+ LOG_ERROR("target_write_memory failed");
+ return result;
+ }
+ }
- result = kinetis_ftfl_command(bank, w0, w1, w2);
+ /* execute section-write command */
+ result = kinetis_ftfx_command(bank, FTFx_CMD_SECTWRITE, bank->base + offset + i,
+ section_count>>8, section_count, 0, 0,
+ 0, 0, 0, 0, &ftfx_fstat);
if (result != ERROR_OK)
return ERROR_FLASH_OPERATION_FAILED;
}
}
- /* program longword command */
- else {
- for (i = 0; i < count; i += 4) {
- LOG_DEBUG("write longword @ %08X", offset + i);
+ /* program longword command, not supported in "SF3" devices */
+ else if ((kinfo->granularity != 3) || (kinfo->klxx)) {
+
+ if (count & 0x3) {
+ uint32_t old_count = count;
+ count = (old_count | 3) + 1;
+ new_buffer = malloc(count);
+ if (new_buffer == NULL) {
+ LOG_ERROR("odd number of bytes to write and no memory "
+ "for padding buffer");
+ return ERROR_FAIL;
+ }
+ LOG_INFO("odd number of bytes to write (%" PRIu32 "), extending to %" PRIu32 " "
+ "and padding with 0xff", old_count, count);
+ memset(new_buffer, 0xff, count);
+ buffer = memcpy(new_buffer, buffer, old_count);
+ }
- w0 = (0x06 << 24) | (offset + i);
- w1 = buf_get_u32(buffer + offset + i, 0, 32);
+ uint32_t words_remaining = count / 4;
- result = kinetis_ftfl_command(bank, w0, w1, w2);
+ /* try using a block write */
+ int retval = kinetis_write_block(bank, buffer, offset, words_remaining);
- if (result != ERROR_OK)
- return ERROR_FLASH_OPERATION_FAILED;
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
+ /* if block write failed (no sufficient working area),
+ * we use normal (slow) single word accesses */
+ LOG_WARNING("couldn't use block writes, falling back to single "
+ "memory accesses");
+
+ for (i = 0; i < count; i += 4) {
+ uint8_t ftfx_fstat;
+
+ LOG_DEBUG("write longword @ %08" PRIX32, (uint32_t)(offset + i));
+
+ uint8_t padding[4] = {0xff, 0xff, 0xff, 0xff};
+ memcpy(padding, buffer + i, MIN(4, count-i));
+
+ result = kinetis_ftfx_command(bank, FTFx_CMD_LWORDPROG, bank->base + offset + i,
+ padding[3], padding[2], padding[1], padding[0],
+ 0, 0, 0, 0, &ftfx_fstat);
+
+ if (result != ERROR_OK)
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
}
+
+ } else {
+ LOG_ERROR("Flash write strategy not implemented");
+ return ERROR_FLASH_OPERATION_FAILED;
}
return ERROR_OK;
}
-static int kinetis_probe(struct flash_bank *bank)
+static int kinetis_read_part_info(struct flash_bank *bank)
{
- struct flash_bank *master_bank;
int result, i;
- uint8_t buf[4];
- uint32_t sim_sdid, sim_fcfg1, sim_fcfg2, offset = 0;
- uint32_t nvm_size, pf_size, ee_size;
+ uint32_t offset = 0;
+ uint8_t fcfg1_nvmsize, fcfg1_pfsize, fcfg1_eesize, fcfg2_pflsh;
+ uint32_t nvm_size = 0, pf_size = 0, ee_size = 0;
+ unsigned granularity, num_blocks = 0, num_pflash_blocks = 0, num_nvm_blocks = 0,
+ first_nvm_bank = 0, reassign = 0;
+ struct target *target = bank->target;
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
+
+ result = target_read_u32(target, SIM_SDID, &kinfo->sim_sdid);
+ if (result != ERROR_OK)
+ return result;
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
+ kinfo->klxx = 0;
- result = kinetis_get_master_bank(bank, &master_bank);
+ /* K-series MCU? */
+ if ((kinfo->sim_sdid & (~KINETIS_SDID_K_SERIES_MASK)) == 0) {
+ uint32_t mcu_type = kinfo->sim_sdid & KINETIS_K_SDID_TYPE_MASK;
- if (result != ERROR_OK)
- return result;
+ switch (mcu_type) {
+ case KINETIS_K_SDID_K10_M50:
+ case KINETIS_K_SDID_K20_M50:
+ /* 1kB sectors */
+ granularity = 0;
+ break;
+ case KINETIS_K_SDID_K10_M72:
+ case KINETIS_K_SDID_K20_M72:
+ case KINETIS_K_SDID_K30_M72:
+ case KINETIS_K_SDID_K30_M100:
+ case KINETIS_K_SDID_K40_M72:
+ case KINETIS_K_SDID_K40_M100:
+ case KINETIS_K_SDID_K50_M72:
+ /* 2kB sectors, 1kB FlexNVM sectors */
+ granularity = 1;
+ break;
+ case KINETIS_K_SDID_K10_M100:
+ case KINETIS_K_SDID_K20_M100:
+ case KINETIS_K_SDID_K11:
+ case KINETIS_K_SDID_K12:
+ case KINETIS_K_SDID_K21_M50:
+ case KINETIS_K_SDID_K22_M50:
+ case KINETIS_K_SDID_K51_M72:
+ case KINETIS_K_SDID_K53:
+ case KINETIS_K_SDID_K60_M100:
+ /* 2kB sectors */
+ granularity = 2;
+ break;
+ case KINETIS_K_SDID_K10_M120:
+ case KINETIS_K_SDID_K20_M120:
+ case KINETIS_K_SDID_K21_M120:
+ case KINETIS_K_SDID_K22_M120:
+ case KINETIS_K_SDID_K60_M150:
+ case KINETIS_K_SDID_K70_M150:
+ /* 4kB sectors */
+ granularity = 3;
+ break;
+ default:
+ LOG_ERROR("Unsupported K-family FAMID");
+ return ERROR_FLASH_OPER_UNSUPPORTED;
+ }
+ }
+ /* KL-series? */
+ else if ((kinfo->sim_sdid & KINETIS_KL_SDID_SERIESID_MASK) == KINETIS_KL_SDID_SERIESID_KL) {
+ kinfo->klxx = 1;
+ granularity = 0;
+ } else {
+ LOG_ERROR("MCU is unsupported");
+ return ERROR_FLASH_OPER_UNSUPPORTED;
+ }
- result = target_read_memory(bank->target, 0x40048024, 1, 4, buf);
- if (result != ERROR_OK)
- return result;
- sim_sdid = target_buffer_get_u32(bank->target, buf);
- result = target_read_memory(bank->target, 0x4004804c, 1, 4, buf);
+ result = target_read_u32(target, SIM_FCFG1, &kinfo->sim_fcfg1);
if (result != ERROR_OK)
return result;
- sim_fcfg1 = target_buffer_get_u32(bank->target, buf);
- result = target_read_memory(bank->target, 0x40048050, 1, 4, buf);
+
+ result = target_read_u32(target, SIM_FCFG2, &kinfo->sim_fcfg2);
if (result != ERROR_OK)
return result;
- sim_fcfg2 = target_buffer_get_u32(bank->target, buf);
+ fcfg2_pflsh = (kinfo->sim_fcfg2 >> 23) & 0x01;
- LOG_DEBUG("SDID: %08X FCFG1: %08X FCFG2: %08X", sim_sdid, sim_fcfg1,
- sim_fcfg2);
+ LOG_DEBUG("SDID: 0x%08" PRIX32 " FCFG1: 0x%08" PRIX32 " FCFG2: 0x%08" PRIX32, kinfo->sim_sdid,
+ kinfo->sim_fcfg1, kinfo->sim_fcfg2);
- switch ((sim_fcfg1 >> 28) & 0x0f) {
- case 0x07:
- nvm_size = 128 * 1024;
- break;
- case 0x09:
- case 0x0f:
- nvm_size = 256 * 1024;
- break;
- default:
- nvm_size = 0;
- break;
- }
+ fcfg1_nvmsize = (uint8_t)((kinfo->sim_fcfg1 >> 28) & 0x0f);
+ fcfg1_pfsize = (uint8_t)((kinfo->sim_fcfg1 >> 24) & 0x0f);
+ fcfg1_eesize = (uint8_t)((kinfo->sim_fcfg1 >> 16) & 0x0f);
- switch ((sim_fcfg1 >> 24) & 0x0f) {
+ /* when the PFLSH bit is set, there is no FlexNVM/FlexRAM */
+ if (!fcfg2_pflsh) {
+ switch (fcfg1_nvmsize) {
+ case 0x03:
case 0x07:
- pf_size = 128 * 1024;
- break;
case 0x09:
- pf_size = 256 * 1024;
- break;
case 0x0b:
+ nvm_size = 1 << (14 + (fcfg1_nvmsize >> 1));
+ break;
case 0x0f:
- pf_size = 512 * 1024;
+ if (granularity == 3)
+ nvm_size = 512<<10;
+ else
+ nvm_size = 256<<10;
break;
default:
- pf_size = 0;
+ nvm_size = 0;
break;
- }
+ }
- switch ((sim_fcfg1 >> 16) & 0x0f) {
+ switch (fcfg1_eesize) {
+ case 0x00:
+ case 0x01:
case 0x02:
- ee_size = 4 * 1024;
- break;
case 0x03:
- ee_size = 2 * 1024;
- break;
case 0x04:
- ee_size = 1 * 1024;
- break;
case 0x05:
- ee_size = 512;
- break;
case 0x06:
- ee_size = 256;
- break;
case 0x07:
- ee_size = 128;
- break;
case 0x08:
- ee_size = 64;
- break;
case 0x09:
- ee_size = 32;
+ ee_size = (16 << (10 - fcfg1_eesize));
break;
default:
ee_size = 0;
break;
+ }
}
- ((struct kinetis_flash_bank *) bank->driver_priv)->nvm_start =
- pf_size - nvm_size;
+ switch (fcfg1_pfsize) {
+ case 0x03:
+ case 0x05:
+ case 0x07:
+ case 0x09:
+ case 0x0b:
+ case 0x0d:
+ pf_size = 1 << (14 + (fcfg1_pfsize >> 1));
+ break;
+ case 0x0f:
+ if (granularity == 3)
+ pf_size = 1024<<10;
+ else if (fcfg2_pflsh)
+ pf_size = 512<<10;
+ else
+ pf_size = 256<<10;
+ break;
+ default:
+ pf_size = 0;
+ break;
+ }
- LOG_DEBUG("NVM: %d PF: %d EE: %d BL1: %d", nvm_size, pf_size, ee_size,
- (sim_fcfg2 >> 23) & 1);
+ LOG_DEBUG("FlexNVM: %" PRIu32 " PFlash: %" PRIu32 " FlexRAM: %" PRIu32 " PFLSH: %d",
+ nvm_size, pf_size, ee_size, fcfg2_pflsh);
+ if (kinfo->klxx)
+ num_blocks = 1;
+ else
+ num_blocks = kinetis_flash_params[granularity].num_blocks;
+
+ num_pflash_blocks = num_blocks / (2 - fcfg2_pflsh);
+ first_nvm_bank = num_pflash_blocks;
+ num_nvm_blocks = num_blocks - num_pflash_blocks;
+
+ LOG_DEBUG("%d blocks total: %d PFlash, %d FlexNVM",
+ num_blocks, num_pflash_blocks, num_nvm_blocks);
+
+ /*
+ * If the flash class is already assigned, verify the
+ * parameters.
+ */
+ if (kinfo->flash_class != FC_AUTO) {
+ if (kinfo->bank_ordinal != (unsigned) bank->bank_number) {
+ LOG_WARNING("Flash ordinal/bank number mismatch");
+ reassign = 1;
+ } else if (kinfo->granularity != granularity) {
+ LOG_WARNING("Flash granularity mismatch");
+ reassign = 1;
+ } else {
+ switch (kinfo->flash_class) {
+ case FC_PFLASH:
+ if (kinfo->bank_ordinal >= first_nvm_bank) {
+ LOG_WARNING("Class mismatch, bank %d is not PFlash", bank->bank_number);
+ reassign = 1;
+ } else if (bank->size != (pf_size / num_pflash_blocks)) {
+ LOG_WARNING("PFlash size mismatch");
+ reassign = 1;
+ } else if (bank->base !=
+ (0x00000000 + bank->size * kinfo->bank_ordinal)) {
+ LOG_WARNING("PFlash address range mismatch");
+ reassign = 1;
+ } else if (kinfo->sector_size !=
+ kinetis_flash_params[granularity].pflash_sector_size_bytes) {
+ LOG_WARNING("PFlash sector size mismatch");
+ reassign = 1;
+ } else {
+ LOG_DEBUG("PFlash bank %d already configured okay",
+ kinfo->bank_ordinal);
+ }
+ break;
+ case FC_FLEX_NVM:
+ if ((kinfo->bank_ordinal >= num_blocks) ||
+ (kinfo->bank_ordinal < first_nvm_bank)) {
+ LOG_WARNING("Class mismatch, bank %d is not FlexNVM", bank->bank_number);
+ reassign = 1;
+ } else if (bank->size != (nvm_size / num_nvm_blocks)) {
+ LOG_WARNING("FlexNVM size mismatch");
+ reassign = 1;
+ } else if (bank->base !=
+ (0x10000000 + bank->size * kinfo->bank_ordinal)) {
+ LOG_WARNING("FlexNVM address range mismatch");
+ reassign = 1;
+ } else if (kinfo->sector_size !=
+ kinetis_flash_params[granularity].nvm_sector_size_bytes) {
+ LOG_WARNING("FlexNVM sector size mismatch");
+ reassign = 1;
+ } else {
+ LOG_DEBUG("FlexNVM bank %d already configured okay",
+ kinfo->bank_ordinal);
+ }
+ break;
+ case FC_FLEX_RAM:
+ if (kinfo->bank_ordinal != num_blocks) {
+ LOG_WARNING("Class mismatch, bank %d is not FlexRAM", bank->bank_number);
+ reassign = 1;
+ } else if (bank->size != ee_size) {
+ LOG_WARNING("FlexRAM size mismatch");
+ reassign = 1;
+ } else if (bank->base != FLEXRAM) {
+ LOG_WARNING("FlexRAM address mismatch");
+ reassign = 1;
+ } else if (kinfo->sector_size !=
+ kinetis_flash_params[granularity].nvm_sector_size_bytes) {
+ LOG_WARNING("FlexRAM sector size mismatch");
+ reassign = 1;
+ } else {
+ LOG_DEBUG("FlexRAM bank %d already configured okay", kinfo->bank_ordinal);
+ }
+ break;
+
+ default:
+ LOG_WARNING("Unknown or inconsistent flash class");
+ reassign = 1;
+ break;
+ }
+ }
+ } else {
+ LOG_INFO("Probing flash info for bank %d", bank->bank_number);
+ reassign = 1;
+ }
+
+ if (!reassign)
+ return ERROR_OK;
+
+ kinfo->granularity = granularity;
+
+ if ((unsigned)bank->bank_number < num_pflash_blocks) {
+ /* pflash, banks start at address zero */
+ kinfo->flash_class = FC_PFLASH;
+ bank->size = (pf_size / num_pflash_blocks);
+ bank->base = 0x00000000 + bank->size * bank->bank_number;
+ kinfo->sector_size = kinetis_flash_params[granularity].pflash_sector_size_bytes;
+ kinfo->protection_size = pf_size / 32;
+ } else if ((unsigned)bank->bank_number < num_blocks) {
+ /* nvm, banks start at address 0x10000000 */
+ kinfo->flash_class = FC_FLEX_NVM;
+ bank->size = (nvm_size / num_nvm_blocks);
+ bank->base = 0x10000000 + bank->size * (bank->bank_number - first_nvm_bank);
+ kinfo->sector_size = kinetis_flash_params[granularity].nvm_sector_size_bytes;
+ kinfo->protection_size = 0; /* FIXME: TODO: depends on DEPART bits, chip */
+ } else if ((unsigned)bank->bank_number == num_blocks) {
+ LOG_ERROR("FlexRAM support not yet implemented");
+ return ERROR_FLASH_OPER_UNSUPPORTED;
+ } else {
+ LOG_ERROR("Cannot determine parameters for bank %d, only %d banks on device",
+ bank->bank_number, num_blocks);
+ return ERROR_FLASH_BANK_INVALID;
+ }
- if (pf_size != bank->size) {
- LOG_WARNING("flash size is different %d != %d", pf_size,
- bank->size);
+ if (bank->sectors) {
+ free(bank->sectors);
+ bank->sectors = NULL;
}
- bank->num_sectors = bank->size / (2 * 1024);
+ bank->num_sectors = bank->size / kinfo->sector_size;
assert(bank->num_sectors > 0);
bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
for (i = 0; i < bank->num_sectors; i++) {
bank->sectors[i].offset = offset;
- bank->sectors[i].size = 2 * 1024;
- offset += bank->sectors[i].size;
+ bank->sectors[i].size = kinfo->sector_size;
+ offset += kinfo->sector_size;
bank->sectors[i].is_erased = -1;
bank->sectors[i].is_protected = 1;
}
- /* update the info we do not have */
- return kinetis_update_bank_info(bank);
+ return ERROR_OK;
+}
+
+static int kinetis_probe(struct flash_bank *bank)
+{
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_WARNING("Cannot communicate... target not halted.");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ return kinetis_read_part_info(bank);
}
static int kinetis_auto_probe(struct flash_bank *bank)
{
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
+
+ if (kinfo->sim_sdid)
+ return ERROR_OK;
+
return kinetis_probe(bank);
}
static int kinetis_info(struct flash_bank *bank, char *buf, int buf_size)
{
- int result;
- struct flash_bank *master_bank;
+ const char *bank_class_names[] = {
+ "(ANY)", "PFlash", "FlexNVM", "FlexRAM"
+ };
- result = kinetis_get_master_bank(bank, &master_bank);
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
- if (result != ERROR_OK)
- return result;
-
- snprintf(buf, buf_size,
- "%s driver for flash bank %s at 0x%8.8" PRIx32 "",
- bank->driver->name, master_bank->name, master_bank->base);
+ (void) snprintf(buf, buf_size,
+ "%s driver for %s flash bank %s at 0x%8.8" PRIx32 "",
+ bank->driver->name, bank_class_names[kinfo->flash_class],
+ bank->name, bank->base);
return ERROR_OK;
}
static int kinetis_blank_check(struct flash_bank *bank)
{
- int result;
- struct flash_bank *master_bank;
-
- LOG_WARNING("kinetis_blank_check not supported yet");
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- result = kinetis_get_master_bank(bank, &master_bank);
+ if (kinfo->flash_class == FC_PFLASH) {
+ int result;
+ uint8_t ftfx_fstat;
- if (result != ERROR_OK)
- return result;
+ /* check if whole bank is blank */
+ result = kinetis_ftfx_command(bank, FTFx_CMD_BLOCKSTAT, bank->base, 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
- return ERROR_OK;
-}
-
-static int kinetis_flash_read(struct flash_bank *bank,
- uint8_t *buffer, uint32_t offset, uint32_t count)
-{
- int result;
- struct flash_bank *master_bank;
-
- LOG_WARNING("kinetis_flash_read not supported yet");
+ if (result != ERROR_OK)
+ return result;
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
+ if (ftfx_fstat & 0x01) {
+ /* the whole bank is not erased, check sector-by-sector */
+ int i;
+ for (i = 0; i < bank->num_sectors; i++) {
+ /* normal margin */
+ result = kinetis_ftfx_command(bank, FTFx_CMD_SECTSTAT, bank->base + bank->sectors[i].offset,
+ 1, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
+
+ if (result == ERROR_OK) {
+ bank->sectors[i].is_erased = !(ftfx_fstat & 0x01);
+ } else {
+ LOG_DEBUG("Ignoring errored PFlash sector blank-check");
+ bank->sectors[i].is_erased = -1;
+ }
+ }
+ } else {
+ /* the whole bank is erased, update all sectors */
+ int i;
+ for (i = 0; i < bank->num_sectors; i++)
+ bank->sectors[i].is_erased = 1;
+ }
+ } else {
+ LOG_WARNING("kinetis_blank_check not supported yet for FlexNVM");
+ return ERROR_FLASH_OPERATION_FAILED;
}
- result = kinetis_get_master_bank(bank, &master_bank);
-
- if (result != ERROR_OK)
- return result;
-
return ERROR_OK;
}
.erase = kinetis_erase,
.protect = kinetis_protect,
.write = kinetis_write,
- .read = kinetis_flash_read,
+ .read = default_flash_read,
.probe = kinetis_probe,
.auto_probe = kinetis_auto_probe,
.erase_check = kinetis_blank_check,