* Copyright (C) 2013 Nemui Trinomius *
* nemuisan_kawausogasuki@live.jp *
* *
+ * Copyright (C) 2015 Tomas Vanek *
+ * vanekt@fbl.cz *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
+#include "jtag/interface.h"
#include "imp.h"
#include <helper/binarybuffer.h>
+#include <helper/time_support.h>
+#include <target/target_type.h>
#include <target/algorithm.h>
#include <target/armv7m.h>
+#include <target/cortex_m.h>
/*
* Implementation Notes
* variants also have FlexNVM and FlexRAM, which always appear
* together.
*
- * A given Kinetis chip may have 2 or 4 blocks of flash. Here we map
+ * A given Kinetis chip may have 1, 2 or 4 blocks of flash. Here we map
* each block to a separate bank. Each block size varies by chip and
* may be determined by the read-only SIM_FCFG1 register. The sector
- * size within each bank/block varies by the chip granularity as
- * described below.
- *
- * Kinetis offers four different of flash granularities applicable
- * across the chip families. The granularity is apparently reflected
- * by at least the reference manual suffix. For example, for chip
- * MK60FN1M0VLQ12, reference manual K60P144M150SF3RM ends in "SF3RM",
- * where the "3" indicates there are four flash blocks with 4kiB
- * sectors. All possible granularities are indicated below.
+ * size within each bank/block varies by chip, and may be 1, 2 or 4k.
+ * The sector size may be different for flash and FlexNVM.
*
- * The first half of the flash (1 or 2 blocks, depending on the
- * granularity) is always Program Flash and always starts at address
- * 0x00000000. The "PFLSH" flag, bit 23 of the read-only SIM_FCFG2
- * register, determines whether the second half of the flash is also
- * Program Flash or FlexNVM+FlexRAM. When PFLSH is set, the second
- * half of flash is Program Flash and is contiguous in the memory map
- * from the first half. When PFLSH is clear, the second half of flash
- * is FlexNVM and always starts at address 0x10000000. FlexRAM, which
- * is also present when PFLSH is clear, always starts at address
- * 0x14000000.
+ * The first half of the flash (1 or 2 blocks) is always Program Flash
+ * and always starts at address 0x00000000. The "PFLSH" flag, bit 23
+ * of the read-only SIM_FCFG2 register, determines whether the second
+ * half of the flash is also Program Flash or FlexNVM+FlexRAM. When
+ * PFLSH is set, the second from the first half. When PFLSH is clear,
+ * the second half of flash is FlexNVM and always starts at address
+ * 0x10000000. FlexRAM, which is also present when PFLSH is clear,
+ * always starts at address 0x14000000.
*
* The Flash Memory Module provides a register set where flash
* commands are loaded to perform flash operations like erase and
* program. Different commands are available depending on whether
* Program Flash or FlexNVM/FlexRAM is being manipulated. Although
* the commands used are quite consistent between flash blocks, the
- * parameters they accept differ according to the flash granularity.
- * Some Kinetis chips have different granularity between Program Flash
- * and FlexNVM/FlexRAM, so flash command arguments may differ between
- * blocks in the same chip.
+ * parameters they accept differ according to the flash sector size.
*
*/
-const struct {
- unsigned pflash_sector_size_bytes;
- unsigned nvm_sector_size_bytes;
- unsigned num_blocks;
-} kinetis_flash_params[4] = {
- { 1<<10, 1<<10, 2 },
- { 2<<10, 1<<10, 2 },
- { 2<<10, 2<<10, 2 },
- { 4<<10, 4<<10, 4 }
-};
-
/* Addressess */
+#define FCF_ADDRESS 0x00000400
+#define FCF_FPROT 0x8
+#define FCF_FSEC 0xc
+#define FCF_FOPT 0xd
+#define FCF_FDPROT 0xf
+#define FCF_SIZE 0x10
+
#define FLEXRAM 0x14000000
+
+#define MSCM_OCMDR0 0x40001400
+#define FMC_PFB01CR 0x4001f004
#define FTFx_FSTAT 0x40020000
#define FTFx_FCNFG 0x40020001
#define FTFx_FCCOB3 0x40020004
#define FTFx_FPROT3 0x40020010
+#define FTFx_FDPROT 0x40020017
#define SIM_SDID 0x40048024
+#define SIM_SOPT1 0x40047000
#define SIM_FCFG1 0x4004804c
#define SIM_FCFG2 0x40048050
+#define WDOG_STCTRH 0x40052000
+#define SMC_PMCTRL 0x4007E001
+#define SMC_PMSTAT 0x4007E003
+#define MCM_PLACR 0xF000300C
+
+/* Values */
+#define PM_STAT_RUN 0x01
+#define PM_STAT_VLPR 0x04
+#define PM_CTRL_RUNM_RUN 0x00
/* Commands */
#define FTFx_CMD_BLOCKSTAT 0x00
#define FTFx_CMD_LWORDPROG 0x06
#define FTFx_CMD_SECTERASE 0x09
#define FTFx_CMD_SECTWRITE 0x0b
-#define FTFx_CMD_SETFLEXRAM 0x81
#define FTFx_CMD_MASSERASE 0x44
+#define FTFx_CMD_PGMPART 0x80
+#define FTFx_CMD_SETFLEXRAM 0x81
-/* The Kinetis K series uses the following SDID layout :
+/* The older Kinetis K series uses the following SDID layout :
* Bit 31-16 : 0
* Bit 15-12 : REVID
* Bit 11-7 : DIEID
* Bit 6-4 : FAMID
* Bit 3-0 : PINID
*
- * The Kinetis KL series uses the following SDID layout :
+ * The newer Kinetis series uses the following SDID layout :
* Bit 31-28 : FAMID
* Bit 27-24 : SUBFAMID
* Bit 23-20 : SERIESID
* Bit 6-4 : Reserved (0)
* Bit 3-0 : PINID
*
- * SERIESID should be 1 for the KL-series so we assume that if
- * bits 31-16 are 0 then it's a K-series MCU.
+ * We assume that if bits 31-16 are 0 then it's an older
+ * K-series MCU.
*/
+#define KINETIS_SOPT1_RAMSIZE_MASK 0x0000F000
+#define KINETIS_SOPT1_RAMSIZE_K24FN1M 0x0000B000
+
#define KINETIS_SDID_K_SERIES_MASK 0x0000FFFF
#define KINETIS_SDID_DIEID_MASK 0x00000F80
-#define KINETIS_SDID_DIEID_K_A 0x00000100
-#define KINETIS_SDID_DIEID_K_B 0x00000200
-#define KINETIS_SDID_DIEID_KL 0x00000000
+
+#define KINETIS_SDID_DIEID_K22FN128 0x00000680 /* smaller pflash with FTFA */
+#define KINETIS_SDID_DIEID_K22FN256 0x00000A80
+#define KINETIS_SDID_DIEID_K22FN512 0x00000E80
+#define KINETIS_SDID_DIEID_K24FN256 0x00000700
+
+#define KINETIS_SDID_DIEID_K24FN1M 0x00000300 /* Detect Errata 7534 */
/* We can't rely solely on the FAMID field to determine the MCU
* type since some FAMID values identify multiple MCUs with
#define KINETIS_K_SDID_K60_M150 0x000001C0
#define KINETIS_K_SDID_K70_M150 0x000001D0
-#define KINETIS_KL_SDID_SERIESID_MASK 0x00F00000
-#define KINETIS_KL_SDID_SERIESID_KL 0x00100000
+#define KINETIS_SDID_SERIESID_MASK 0x00F00000
+#define KINETIS_SDID_SERIESID_K 0x00000000
+#define KINETIS_SDID_SERIESID_KL 0x00100000
+#define KINETIS_SDID_SERIESID_KE 0x00200000
+#define KINETIS_SDID_SERIESID_KW 0x00500000
+#define KINETIS_SDID_SERIESID_KV 0x00600000
+
+#define KINETIS_SDID_SUBFAMID_MASK 0x0F000000
+#define KINETIS_SDID_SUBFAMID_KX0 0x00000000
+#define KINETIS_SDID_SUBFAMID_KX1 0x01000000
+#define KINETIS_SDID_SUBFAMID_KX2 0x02000000
+#define KINETIS_SDID_SUBFAMID_KX3 0x03000000
+#define KINETIS_SDID_SUBFAMID_KX4 0x04000000
+#define KINETIS_SDID_SUBFAMID_KX5 0x05000000
+#define KINETIS_SDID_SUBFAMID_KX6 0x06000000
+#define KINETIS_SDID_SUBFAMID_KX7 0x07000000
+#define KINETIS_SDID_SUBFAMID_KX8 0x08000000
+
+#define KINETIS_SDID_FAMILYID_MASK 0xF0000000
+#define KINETIS_SDID_FAMILYID_K0X 0x00000000
+#define KINETIS_SDID_FAMILYID_K1X 0x10000000
+#define KINETIS_SDID_FAMILYID_K2X 0x20000000
+#define KINETIS_SDID_FAMILYID_K3X 0x30000000
+#define KINETIS_SDID_FAMILYID_K4X 0x40000000
+#define KINETIS_SDID_FAMILYID_K6X 0x60000000
+#define KINETIS_SDID_FAMILYID_K7X 0x70000000
+#define KINETIS_SDID_FAMILYID_K8X 0x80000000
+
+/* The field originally named DIEID has new name/meaning on KE1x */
+#define KINETIS_SDID_PROJECTID_MASK KINETIS_SDID_DIEID_MASK
+#define KINETIS_SDID_PROJECTID_KE1xF 0x00000080
+#define KINETIS_SDID_PROJECTID_KE1xZ 0x00000100
struct kinetis_flash_bank {
- unsigned granularity;
- unsigned bank_ordinal;
+ bool probed;
uint32_t sector_size;
+ uint32_t max_flash_prog_size;
uint32_t protection_size;
- uint32_t klxx;
+ uint32_t prog_base; /* base address for FTFx operations */
+ /* same as bank->base for pflash, differs for FlexNVM */
+ uint32_t protection_block; /* number of first protection block in this bank */
uint32_t sim_sdid;
uint32_t sim_fcfg1;
FC_FLEX_NVM,
FC_FLEX_RAM,
} flash_class;
+
+ enum {
+ FS_PROGRAM_SECTOR = 1,
+ FS_PROGRAM_LONGWORD = 2,
+ FS_PROGRAM_PHRASE = 4, /* Unsupported */
+ FS_INVALIDATE_CACHE_K = 8, /* using FMC->PFB0CR/PFB01CR */
+ FS_INVALIDATE_CACHE_L = 0x10, /* using MCM->PLACR */
+ FS_INVALIDATE_CACHE_MSCM = 0x20,
+ } flash_support;
};
+#define MDM_AP 1
+
+#define MDM_REG_STAT 0x00
+#define MDM_REG_CTRL 0x04
+#define MDM_REG_ID 0xfc
+
+#define MDM_STAT_FMEACK (1<<0)
+#define MDM_STAT_FREADY (1<<1)
+#define MDM_STAT_SYSSEC (1<<2)
+#define MDM_STAT_SYSRES (1<<3)
+#define MDM_STAT_FMEEN (1<<5)
+#define MDM_STAT_BACKDOOREN (1<<6)
+#define MDM_STAT_LPEN (1<<7)
+#define MDM_STAT_VLPEN (1<<8)
+#define MDM_STAT_LLSMODEXIT (1<<9)
+#define MDM_STAT_VLLSXMODEXIT (1<<10)
+#define MDM_STAT_CORE_HALTED (1<<16)
+#define MDM_STAT_CORE_SLEEPDEEP (1<<17)
+#define MDM_STAT_CORESLEEPING (1<<18)
+
+#define MDM_CTRL_FMEIP (1<<0)
+#define MDM_CTRL_DBG_DIS (1<<1)
+#define MDM_CTRL_DBG_REQ (1<<2)
+#define MDM_CTRL_SYS_RES_REQ (1<<3)
+#define MDM_CTRL_CORE_HOLD_RES (1<<4)
+#define MDM_CTRL_VLLSX_DBG_REQ (1<<5)
+#define MDM_CTRL_VLLSX_DBG_ACK (1<<6)
+#define MDM_CTRL_VLLSX_STAT_ACK (1<<7)
+
+#define MDM_ACCESS_TIMEOUT 500 /* msec */
+
+
+static bool allow_fcf_writes;
+static uint8_t fcf_fopt = 0xff;
+
+
+struct flash_driver kinetis_flash;
+static int kinetis_write_inner(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t count);
+static int kinetis_auto_probe(struct flash_bank *bank);
+
+
+static int kinetis_mdm_write_register(struct adiv5_dap *dap, unsigned reg, uint32_t value)
+{
+ int retval;
+ LOG_DEBUG("MDM_REG[0x%02x] <- %08" PRIX32, reg, value);
+
+ retval = dap_queue_ap_write(dap_ap(dap, MDM_AP), reg, value);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("MDM: failed to queue a write request");
+ return retval;
+ }
+
+ retval = dap_run(dap);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("MDM: dap_run failed");
+ return retval;
+ }
+
+
+ return ERROR_OK;
+}
+
+static int kinetis_mdm_read_register(struct adiv5_dap *dap, unsigned reg, uint32_t *result)
+{
+ int retval;
+
+ retval = dap_queue_ap_read(dap_ap(dap, MDM_AP), reg, result);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("MDM: failed to queue a read request");
+ return retval;
+ }
+
+ retval = dap_run(dap);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("MDM: dap_run failed");
+ return retval;
+ }
+
+ LOG_DEBUG("MDM_REG[0x%02x]: %08" PRIX32, reg, *result);
+ return ERROR_OK;
+}
+
+static int kinetis_mdm_poll_register(struct adiv5_dap *dap, unsigned reg,
+ uint32_t mask, uint32_t value, uint32_t timeout_ms)
+{
+ uint32_t val;
+ int retval;
+ int64_t ms_timeout = timeval_ms() + timeout_ms;
+
+ do {
+ retval = kinetis_mdm_read_register(dap, reg, &val);
+ if (retval != ERROR_OK || (val & mask) == value)
+ return retval;
+
+ alive_sleep(1);
+ } while (timeval_ms() < ms_timeout);
+
+ LOG_DEBUG("MDM: polling timed out");
+ return ERROR_FAIL;
+}
+
+/*
+ * This command can be used to break a watchdog reset loop when
+ * connecting to an unsecured target. Unlike other commands, halt will
+ * automatically retry as it does not know how far into the boot process
+ * it is when the command is called.
+ */
+COMMAND_HANDLER(kinetis_mdm_halt)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct cortex_m_common *cortex_m = target_to_cm(target);
+ struct adiv5_dap *dap = cortex_m->armv7m.arm.dap;
+ int retval;
+ int tries = 0;
+ uint32_t stat;
+ int64_t ms_timeout = timeval_ms() + MDM_ACCESS_TIMEOUT;
+
+ if (!dap) {
+ LOG_ERROR("Cannot perform halt with a high-level adapter");
+ return ERROR_FAIL;
+ }
+
+ while (true) {
+ tries++;
+
+ kinetis_mdm_write_register(dap, MDM_REG_CTRL, MDM_CTRL_CORE_HOLD_RES);
+
+ alive_sleep(1);
+
+ retval = kinetis_mdm_read_register(dap, MDM_REG_STAT, &stat);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("MDM: failed to read MDM_REG_STAT");
+ continue;
+ }
+
+ /* Repeat setting MDM_CTRL_CORE_HOLD_RES until system is out of
+ * reset with flash ready and without security
+ */
+ if ((stat & (MDM_STAT_FREADY | MDM_STAT_SYSSEC | MDM_STAT_SYSRES))
+ == (MDM_STAT_FREADY | MDM_STAT_SYSRES))
+ break;
+
+ if (timeval_ms() >= ms_timeout) {
+ LOG_ERROR("MDM: halt timed out");
+ return ERROR_FAIL;
+ }
+ }
+
+ LOG_DEBUG("MDM: halt succeded after %d attempts.", tries);
+
+ target_poll(target);
+ /* enable polling in case kinetis_check_flash_security_status disabled it */
+ jtag_poll_set_enabled(true);
+
+ alive_sleep(100);
+
+ target->reset_halt = true;
+ target->type->assert_reset(target);
+
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to clear MDM_REG_CTRL");
+ return retval;
+ }
+
+ target->type->deassert_reset(target);
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(kinetis_mdm_reset)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct cortex_m_common *cortex_m = target_to_cm(target);
+ struct adiv5_dap *dap = cortex_m->armv7m.arm.dap;
+ int retval;
+
+ if (!dap) {
+ LOG_ERROR("Cannot perform reset with a high-level adapter");
+ return ERROR_FAIL;
+ }
+
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, MDM_CTRL_SYS_RES_REQ);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to write MDM_REG_CTRL");
+ return retval;
+ }
+
+ retval = kinetis_mdm_poll_register(dap, MDM_REG_STAT, MDM_STAT_SYSRES, 0, 500);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to assert reset");
+ return retval;
+ }
+
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to clear MDM_REG_CTRL");
+ return retval;
+ }
+
+ return ERROR_OK;
+}
+
+/*
+ * This function implements the procedure to mass erase the flash via
+ * SWD/JTAG on Kinetis K and L series of devices as it is described in
+ * AN4835 "Production Flash Programming Best Practices for Kinetis K-
+ * and L-series MCUs" Section 4.2.1. To prevent a watchdog reset loop,
+ * the core remains halted after this function completes as suggested
+ * by the application note.
+ */
+COMMAND_HANDLER(kinetis_mdm_mass_erase)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct cortex_m_common *cortex_m = target_to_cm(target);
+ struct adiv5_dap *dap = cortex_m->armv7m.arm.dap;
+
+ if (!dap) {
+ LOG_ERROR("Cannot perform mass erase with a high-level adapter");
+ return ERROR_FAIL;
+ }
+
+ int retval;
+
+ /*
+ * ... Power on the processor, or if power has already been
+ * applied, assert the RESET pin to reset the processor. For
+ * devices that do not have a RESET pin, write the System
+ * Reset Request bit in the MDM-AP control register after
+ * establishing communication...
+ */
+
+ /* assert SRST if configured */
+ bool has_srst = jtag_get_reset_config() & RESET_HAS_SRST;
+ if (has_srst)
+ adapter_assert_reset();
+
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, MDM_CTRL_SYS_RES_REQ);
+ if (retval != ERROR_OK && !has_srst) {
+ LOG_ERROR("MDM: failed to assert reset");
+ goto deassert_reset_and_exit;
+ }
+
+ /*
+ * ... Read the MDM-AP status register repeatedly and wait for
+ * stable conditions suitable for mass erase:
+ * - mass erase is enabled
+ * - flash is ready
+ * - reset is finished
+ *
+ * Mass erase is started as soon as all conditions are met in 32
+ * subsequent status reads.
+ *
+ * In case of not stable conditions (RESET/WDOG loop in secured device)
+ * the user is asked for manual pressing of RESET button
+ * as a last resort.
+ */
+ int cnt_mass_erase_disabled = 0;
+ int cnt_ready = 0;
+ int64_t ms_start = timeval_ms();
+ bool man_reset_requested = false;
+
+ do {
+ uint32_t stat = 0;
+ int64_t ms_elapsed = timeval_ms() - ms_start;
+
+ if (!man_reset_requested && ms_elapsed > 100) {
+ LOG_INFO("MDM: Press RESET button now if possible.");
+ man_reset_requested = true;
+ }
+
+ if (ms_elapsed > 3000) {
+ LOG_ERROR("MDM: waiting for mass erase conditions timed out.");
+ LOG_INFO("Mass erase of a secured MCU is not possible without hardware reset.");
+ LOG_INFO("Connect SRST, use 'reset_config srst_only' and retry.");
+ goto deassert_reset_and_exit;
+ }
+ retval = kinetis_mdm_read_register(dap, MDM_REG_STAT, &stat);
+ if (retval != ERROR_OK) {
+ cnt_ready = 0;
+ continue;
+ }
+
+ if (!(stat & MDM_STAT_FMEEN)) {
+ cnt_ready = 0;
+ cnt_mass_erase_disabled++;
+ if (cnt_mass_erase_disabled > 10) {
+ LOG_ERROR("MDM: mass erase is disabled");
+ goto deassert_reset_and_exit;
+ }
+ continue;
+ }
+
+ if ((stat & (MDM_STAT_FREADY | MDM_STAT_SYSRES)) == MDM_STAT_FREADY)
+ cnt_ready++;
+ else
+ cnt_ready = 0;
+
+ } while (cnt_ready < 32);
+
+ /*
+ * ... Write the MDM-AP control register to set the Flash Mass
+ * Erase in Progress bit. This will start the mass erase
+ * process...
+ */
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, MDM_CTRL_SYS_RES_REQ | MDM_CTRL_FMEIP);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to start mass erase");
+ goto deassert_reset_and_exit;
+ }
+
+ /*
+ * ... Read the MDM-AP control register until the Flash Mass
+ * Erase in Progress bit clears...
+ * Data sheed defines erase time <3.6 sec/512kB flash block.
+ * The biggest device has 4 pflash blocks => timeout 16 sec.
+ */
+ retval = kinetis_mdm_poll_register(dap, MDM_REG_CTRL, MDM_CTRL_FMEIP, 0, 16000);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: mass erase timeout");
+ goto deassert_reset_and_exit;
+ }
+
+ target_poll(target);
+ /* enable polling in case kinetis_check_flash_security_status disabled it */
+ jtag_poll_set_enabled(true);
+
+ alive_sleep(100);
+
+ target->reset_halt = true;
+ target->type->assert_reset(target);
+
+ /*
+ * ... Negate the RESET signal or clear the System Reset Request
+ * bit in the MDM-AP control register.
+ */
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0);
+ if (retval != ERROR_OK)
+ LOG_ERROR("MDM: failed to clear MDM_REG_CTRL");
+
+ target->type->deassert_reset(target);
+
+ return retval;
+
+deassert_reset_and_exit:
+ kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0);
+ if (has_srst)
+ adapter_deassert_reset();
+ return retval;
+}
+
+static const uint32_t kinetis_known_mdm_ids[] = {
+ 0x001C0000, /* Kinetis-K Series */
+ 0x001C0020, /* Kinetis-L/M/V/E Series */
+};
+
+/*
+ * This function implements the procedure to connect to
+ * SWD/JTAG on Kinetis K and L series of devices as it is described in
+ * AN4835 "Production Flash Programming Best Practices for Kinetis K-
+ * and L-series MCUs" Section 4.1.1
+ */
+COMMAND_HANDLER(kinetis_check_flash_security_status)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct cortex_m_common *cortex_m = target_to_cm(target);
+ struct adiv5_dap *dap = cortex_m->armv7m.arm.dap;
+
+ if (!dap) {
+ LOG_WARNING("Cannot check flash security status with a high-level adapter");
+ return ERROR_OK;
+ }
+
+ if (!dap->ops)
+ return ERROR_OK; /* too early to check, in JTAG mode ops may not be initialised */
+
+ uint32_t val;
+ int retval;
+
+ /*
+ * ... The MDM-AP ID register can be read to verify that the
+ * connection is working correctly...
+ */
+ retval = kinetis_mdm_read_register(dap, MDM_REG_ID, &val);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to read ID register");
+ return ERROR_OK;
+ }
+
+ if (val == 0)
+ return ERROR_OK; /* dap not yet initialised */
+
+ bool found = false;
+ for (size_t i = 0; i < ARRAY_SIZE(kinetis_known_mdm_ids); i++) {
+ if (val == kinetis_known_mdm_ids[i]) {
+ found = true;
+ break;
+ }
+ }
+
+ if (!found)
+ LOG_WARNING("MDM: unknown ID %08" PRIX32, val);
+
+ /*
+ * ... Read the System Security bit to determine if security is enabled.
+ * If System Security = 0, then proceed. If System Security = 1, then
+ * communication with the internals of the processor, including the
+ * flash, will not be possible without issuing a mass erase command or
+ * unsecuring the part through other means (backdoor key unlock)...
+ */
+ retval = kinetis_mdm_read_register(dap, MDM_REG_STAT, &val);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to read MDM_REG_STAT");
+ return ERROR_OK;
+ }
+
+ /*
+ * System Security bit is also active for short time during reset.
+ * If a MCU has blank flash and runs in RESET/WDOG loop,
+ * System Security bit is active most of time!
+ * We should observe Flash Ready bit and read status several times
+ * to avoid false detection of secured MCU
+ */
+ int secured_score = 0, flash_not_ready_score = 0;
+
+ if ((val & (MDM_STAT_SYSSEC | MDM_STAT_FREADY)) != MDM_STAT_FREADY) {
+ uint32_t stats[32];
+ int i;
+
+ for (i = 0; i < 32; i++) {
+ stats[i] = MDM_STAT_FREADY;
+ dap_queue_ap_read(dap_ap(dap, MDM_AP), MDM_REG_STAT, &stats[i]);
+ }
+ retval = dap_run(dap);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("MDM: dap_run failed when validating secured state");
+ return ERROR_OK;
+ }
+ for (i = 0; i < 32; i++) {
+ if (stats[i] & MDM_STAT_SYSSEC)
+ secured_score++;
+ if (!(stats[i] & MDM_STAT_FREADY))
+ flash_not_ready_score++;
+ }
+ }
+
+ if (flash_not_ready_score <= 8 && secured_score > 24) {
+ jtag_poll_set_enabled(false);
+
+ LOG_WARNING("*********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********");
+ LOG_WARNING("**** ****");
+ LOG_WARNING("**** Your Kinetis MCU is in secured state, which means that, ****");
+ LOG_WARNING("**** with exception for very basic communication, JTAG/SWD ****");
+ LOG_WARNING("**** interface will NOT work. In order to restore its ****");
+ LOG_WARNING("**** functionality please issue 'kinetis mdm mass_erase' ****");
+ LOG_WARNING("**** command, power cycle the MCU and restart OpenOCD. ****");
+ LOG_WARNING("**** ****");
+ LOG_WARNING("*********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********");
+
+ } else if (flash_not_ready_score > 24) {
+ jtag_poll_set_enabled(false);
+ LOG_WARNING("**** Your Kinetis MCU is probably locked-up in RESET/WDOG loop. ****");
+ LOG_WARNING("**** Common reason is a blank flash (at least a reset vector). ****");
+ LOG_WARNING("**** Issue 'kinetis mdm halt' command or if SRST is connected ****");
+ LOG_WARNING("**** and configured, use 'reset halt' ****");
+ LOG_WARNING("**** If MCU cannot be halted, it is likely secured and running ****");
+ LOG_WARNING("**** in RESET/WDOG loop. Issue 'kinetis mdm mass_erase' ****");
+
+ } else {
+ LOG_INFO("MDM: Chip is unsecured. Continuing.");
+ jtag_poll_set_enabled(true);
+ }
+
+ return ERROR_OK;
+}
+
FLASH_BANK_COMMAND_HANDLER(kinetis_flash_bank_command)
{
struct kinetis_flash_bank *bank_info;
return ERROR_OK;
}
+/* Disable the watchdog on Kinetis devices */
+int kinetis_disable_wdog(struct target *target, uint32_t sim_sdid)
+{
+ struct working_area *wdog_algorithm;
+ struct armv7m_algorithm armv7m_info;
+ uint16_t wdog;
+ int retval;
+
+ static const uint8_t kinetis_unlock_wdog_code[] = {
+#include "../../../contrib/loaders/watchdog/armv7m_kinetis_wdog.inc"
+ };
+
+ /* Decide whether the connected device needs watchdog disabling.
+ * Disable for all Kx and KVx devices, return if it is a KLx */
+
+ if ((sim_sdid & KINETIS_SDID_SERIESID_MASK) == KINETIS_SDID_SERIESID_KL)
+ return ERROR_OK;
+
+ /* The connected device requires watchdog disabling. */
+ retval = target_read_u16(target, WDOG_STCTRH, &wdog);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if ((wdog & 0x1) == 0) {
+ /* watchdog already disabled */
+ return ERROR_OK;
+ }
+ LOG_INFO("Disabling Kinetis watchdog (initial WDOG_STCTRLH = 0x%x)", wdog);
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ retval = target_alloc_working_area(target, sizeof(kinetis_unlock_wdog_code), &wdog_algorithm);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = target_write_buffer(target, wdog_algorithm->address,
+ sizeof(kinetis_unlock_wdog_code), (uint8_t *)kinetis_unlock_wdog_code);
+ if (retval != ERROR_OK) {
+ target_free_working_area(target, wdog_algorithm);
+ return retval;
+ }
+
+ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+ armv7m_info.core_mode = ARM_MODE_THREAD;
+
+ retval = target_run_algorithm(target, 0, NULL, 0, NULL, wdog_algorithm->address,
+ wdog_algorithm->address + (sizeof(kinetis_unlock_wdog_code) - 2),
+ 10000, &armv7m_info);
+
+ if (retval != ERROR_OK)
+ LOG_ERROR("error executing kinetis wdog unlock algorithm");
+
+ retval = target_read_u16(target, WDOG_STCTRH, &wdog);
+ if (retval != ERROR_OK)
+ return retval;
+ LOG_INFO("WDOG_STCTRLH = 0x%x", wdog);
+
+ target_free_working_area(target, wdog_algorithm);
+
+ return retval;
+}
+
+COMMAND_HANDLER(kinetis_disable_wdog_handler)
+{
+ int result;
+ uint32_t sim_sdid;
+ struct target *target = get_current_target(CMD_CTX);
+
+ if (CMD_ARGC > 0)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ result = target_read_u32(target, SIM_SDID, &sim_sdid);
+ if (result != ERROR_OK) {
+ LOG_ERROR("Failed to read SIMSDID");
+ return result;
+ }
+
+ result = kinetis_disable_wdog(target, sim_sdid);
+ return result;
+}
+
+
+static int kinetis_ftfx_decode_error(uint8_t fstat)
+{
+ if (fstat & 0x20) {
+ LOG_ERROR("Flash operation failed, illegal command");
+ return ERROR_FLASH_OPER_UNSUPPORTED;
+
+ } else if (fstat & 0x10)
+ LOG_ERROR("Flash operation failed, protection violated");
+
+ else if (fstat & 0x40)
+ LOG_ERROR("Flash operation failed, read collision");
+
+ else if (fstat & 0x80)
+ return ERROR_OK;
+
+ else
+ LOG_ERROR("Flash operation timed out");
+
+ return ERROR_FLASH_OPERATION_FAILED;
+}
+
+
+static int kinetis_ftfx_prepare(struct target *target)
+{
+ int result, i;
+ uint8_t fstat;
+
+ /* wait until busy */
+ for (i = 0; i < 50; i++) {
+ result = target_read_u8(target, FTFx_FSTAT, &fstat);
+ if (result != ERROR_OK)
+ return result;
+
+ if (fstat & 0x80)
+ break;
+ }
+
+ if ((fstat & 0x80) == 0) {
+ LOG_ERROR("Flash controller is busy");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ if (fstat != 0x80) {
+ /* reset error flags */
+ result = target_write_u8(target, FTFx_FSTAT, 0x70);
+ }
+ return result;
+}
+
/* Kinetis Program-LongWord Microcodes */
static const uint8_t kinetis_flash_write_code[] = {
- /* Params:
- * r0 - workarea buffer
- * r1 - target address
- * r2 - wordcount
- * Clobbered:
- * r4 - tmp
- * r5 - tmp
- * r6 - tmp
- * r7 - tmp
- */
-
- /* .L1: */
- /* for(register uint32_t i=0;i<wcount;i++){ */
- 0x04, 0x1C, /* mov r4, r0 */
- 0x00, 0x23, /* mov r3, #0 */
- /* .L2: */
- 0x0E, 0x1A, /* sub r6, r1, r0 */
- 0xA6, 0x19, /* add r6, r4, r6 */
- 0x93, 0x42, /* cmp r3, r2 */
- 0x16, 0xD0, /* beq .L9 */
- /* .L5: */
- /* while((FTFx_FSTAT&FTFA_FSTAT_CCIF_MASK) != FTFA_FSTAT_CCIF_MASK){}; */
- 0x0B, 0x4D, /* ldr r5, .L10 */
- 0x2F, 0x78, /* ldrb r7, [r5] */
- 0x7F, 0xB2, /* sxtb r7, r7 */
- 0x00, 0x2F, /* cmp r7, #0 */
- 0xFA, 0xDA, /* bge .L5 */
- /* FTFx_FSTAT = FTFA_FSTAT_ACCERR_MASK|FTFA_FSTAT_FPVIOL_MASK|FTFA_FSTAT_RDCO */
- 0x70, 0x27, /* mov r7, #112 */
- 0x2F, 0x70, /* strb r7, [r5] */
- /* FTFx_FCCOB3 = faddr; */
- 0x09, 0x4F, /* ldr r7, .L10+4 */
- 0x3E, 0x60, /* str r6, [r7] */
- 0x06, 0x27, /* mov r7, #6 */
- /* FTFx_FCCOB0 = 0x06; */
- 0x08, 0x4E, /* ldr r6, .L10+8 */
- 0x37, 0x70, /* strb r7, [r6] */
- /* FTFx_FCCOB7 = *pLW; */
- 0x80, 0xCC, /* ldmia r4!, {r7} */
- 0x08, 0x4E, /* ldr r6, .L10+12 */
- 0x37, 0x60, /* str r7, [r6] */
- /* FTFx_FSTAT = FTFA_FSTAT_CCIF_MASK; */
- 0x80, 0x27, /* mov r7, #128 */
- 0x2F, 0x70, /* strb r7, [r5] */
- /* .L4: */
- /* while((FTFx_FSTAT&FTFA_FSTAT_CCIF_MASK) != FTFA_FSTAT_CCIF_MASK){}; */
- 0x2E, 0x78, /* ldrb r6, [r5] */
- 0x77, 0xB2, /* sxtb r7, r6 */
- 0x00, 0x2F, /* cmp r7, #0 */
- 0xFB, 0xDA, /* bge .L4 */
- 0x01, 0x33, /* add r3, r3, #1 */
- 0xE4, 0xE7, /* b .L2 */
- /* .L9: */
- 0x00, 0xBE, /* bkpt #0 */
- /* .L10: */
- 0x00, 0x00, 0x02, 0x40, /* .word 1073872896 */
- 0x04, 0x00, 0x02, 0x40, /* .word 1073872900 */
- 0x07, 0x00, 0x02, 0x40, /* .word 1073872903 */
- 0x08, 0x00, 0x02, 0x40, /* .word 1073872904 */
+#include "../../../contrib/loaders/flash/kinetis/kinetis_flash.inc"
};
/* Program LongWord Block Write */
-static int kinetis_write_block(struct flash_bank *bank, uint8_t *buffer,
+static int kinetis_write_block(struct flash_bank *bank, const uint8_t *buffer,
uint32_t offset, uint32_t wcount)
{
struct target *target = bank->target;
uint32_t buffer_size = 2048; /* Default minimum value */
struct working_area *write_algorithm;
struct working_area *source;
- uint32_t address = bank->base + offset;
- struct reg_param reg_params[3];
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
+ uint32_t address = kinfo->prog_base + offset;
+ uint32_t end_address;
+ struct reg_param reg_params[5];
struct armv7m_algorithm armv7m_info;
- int retval = ERROR_OK;
-
- /* Params:
- * r0 - workarea buffer
- * r1 - target address
- * r2 - wordcount
- * Clobbered:
- * r4 - tmp
- * r5 - tmp
- * r6 - tmp
- * r7 - tmp
- */
+ int retval;
+ uint8_t fstat;
/* Increase buffer_size if needed */
if (buffer_size < (target->working_area_size/2))
buffer_size = (target->working_area_size/2);
- LOG_INFO("Kinetis: FLASH Write ...");
-
- /* check code alignment */
- if (offset & 0x1) {
- LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
/* allocate working area with flash programming code */
if (target_alloc_working_area(target, sizeof(kinetis_flash_write_code),
&write_algorithm) != ERROR_OK) {
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
- init_reg_param(®_params[0], "r0", 32, PARAM_OUT); /* *pLW (*buffer) */
- init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* faddr */
- init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* number of words to program */
+ init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* address */
+ init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* word count */
+ init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
+ init_reg_param(®_params[3], "r3", 32, PARAM_OUT);
+ init_reg_param(®_params[4], "r4", 32, PARAM_OUT);
- /* write code buffer and use Flash programming code within kinetis */
- /* Set breakpoint to 0 with time-out of 1000 ms */
- while (wcount > 0) {
- uint32_t thisrun_count = (wcount > (buffer_size / 4)) ? (buffer_size / 4) : wcount;
+ buf_set_u32(reg_params[0].value, 0, 32, address);
+ buf_set_u32(reg_params[1].value, 0, 32, wcount);
+ buf_set_u32(reg_params[2].value, 0, 32, source->address);
+ buf_set_u32(reg_params[3].value, 0, 32, source->address + source->size);
+ buf_set_u32(reg_params[4].value, 0, 32, FTFx_FSTAT);
- retval = target_write_buffer(target, source->address, thisrun_count * 4, buffer);
- if (retval != ERROR_OK)
- break;
+ retval = target_run_flash_async_algorithm(target, buffer, wcount, 4,
+ 0, NULL,
+ 5, reg_params,
+ source->address, source->size,
+ write_algorithm->address, 0,
+ &armv7m_info);
- buf_set_u32(reg_params[0].value, 0, 32, source->address);
- buf_set_u32(reg_params[1].value, 0, 32, address);
- buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
+ if (retval == ERROR_FLASH_OPERATION_FAILED) {
+ end_address = buf_get_u32(reg_params[0].value, 0, 32);
- retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
- write_algorithm->address, 0, 100000, &armv7m_info);
- if (retval != ERROR_OK) {
- LOG_ERROR("Error executing kinetis Flash programming algorithm");
- retval = ERROR_FLASH_OPERATION_FAILED;
- break;
- }
+ LOG_ERROR("Error writing flash at %08" PRIx32, end_address);
- buffer += thisrun_count * 4;
- address += thisrun_count * 4;
- wcount -= thisrun_count;
- }
+ retval = target_read_u8(target, FTFx_FSTAT, &fstat);
+ if (retval == ERROR_OK) {
+ retval = kinetis_ftfx_decode_error(fstat);
+
+ /* reset error flags */
+ target_write_u8(target, FTFx_FSTAT, 0x70);
+ }
+ } else if (retval != ERROR_OK)
+ LOG_ERROR("Error executing kinetis Flash programming algorithm");
target_free_working_area(target, source);
target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
+ destroy_reg_param(®_params[3]);
+ destroy_reg_param(®_params[4]);
return retval;
}
static int kinetis_protect(struct flash_bank *bank, int set, int first, int last)
{
- LOG_WARNING("kinetis_protect not supported yet");
- /* FIXME: TODO */
+ int i;
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
+ if (allow_fcf_writes) {
+ LOG_ERROR("Protection setting is possible with 'kinetis fcf_source protection' only!");
+ return ERROR_FAIL;
+ }
+
+ if (!bank->prot_blocks || bank->num_prot_blocks == 0) {
+ LOG_ERROR("No protection possible for current bank!");
+ return ERROR_FLASH_BANK_INVALID;
}
- return ERROR_FLASH_BANK_INVALID;
+ for (i = first; i < bank->num_prot_blocks && i <= last; i++)
+ bank->prot_blocks[i].is_protected = set;
+
+ LOG_INFO("Protection bits will be written at the next FCF sector erase or write.");
+ LOG_INFO("Do not issue 'flash info' command until protection is written,");
+ LOG_INFO("doing so would re-read protection status from MCU.");
+
+ return ERROR_OK;
}
static int kinetis_protect_check(struct flash_bank *bank)
{
struct kinetis_flash_bank *kinfo = bank->driver_priv;
-
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
+ int result;
+ int i, b;
+ uint32_t fprot;
if (kinfo->flash_class == FC_PFLASH) {
- int result;
- uint8_t buffer[4];
- uint32_t fprot, psec;
- int i, b;
/* read protection register */
- result = target_read_memory(bank->target, FTFx_FPROT3, 1, 4, buffer);
+ result = target_read_u32(bank->target, FTFx_FPROT3, &fprot);
+ if (result != ERROR_OK)
+ return result;
+
+ /* Every bit protects 1/32 of the full flash (not necessarily just this bank) */
+ } else if (kinfo->flash_class == FC_FLEX_NVM) {
+ uint8_t fdprot;
+
+ /* read protection register */
+ result = target_read_u8(bank->target, FTFx_FDPROT, &fdprot);
if (result != ERROR_OK)
return result;
- fprot = target_buffer_get_u32(bank->target, buffer);
+ fprot = fdprot;
- /*
- * Every bit protects 1/32 of the full flash (not necessarily
- * just this bank), but we enforce the bank ordinals for
- * PFlash to start at zero.
- */
- b = kinfo->bank_ordinal * (bank->size / kinfo->protection_size);
- for (psec = 0, i = 0; i < bank->num_sectors; i++) {
- if ((fprot >> b) & 1)
- bank->sectors[i].is_protected = 0;
- else
- bank->sectors[i].is_protected = 1;
+ } else {
+ LOG_ERROR("Protection checks for FlexRAM not supported");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ b = kinfo->protection_block;
+ for (i = 0; i < bank->num_prot_blocks; i++) {
+ if ((fprot >> b) & 1)
+ bank->prot_blocks[i].is_protected = 0;
+ else
+ bank->prot_blocks[i].is_protected = 1;
+
+ b++;
+ }
+
+ return ERROR_OK;
+}
+
+
+static int kinetis_fill_fcf(struct flash_bank *bank, uint8_t *fcf)
+{
+ uint32_t fprot = 0xffffffff;
+ uint8_t fsec = 0xfe; /* set MCU unsecure */
+ uint8_t fdprot = 0xff;
+ int i;
+ uint32_t pflash_bit;
+ uint8_t dflash_bit;
+ struct flash_bank *bank_iter;
+ struct kinetis_flash_bank *kinfo;
+
+ memset(fcf, 0xff, FCF_SIZE);
+
+ pflash_bit = 1;
+ dflash_bit = 1;
+
+ /* iterate over all kinetis banks */
+ /* current bank is bank 0, it contains FCF */
+ for (bank_iter = bank; bank_iter; bank_iter = bank_iter->next) {
+ if (bank_iter->driver != &kinetis_flash
+ || bank_iter->target != bank->target)
+ continue;
+
+ kinetis_auto_probe(bank_iter);
+
+ kinfo = bank->driver_priv;
+ if (!kinfo)
+ continue;
+
+ if (kinfo->flash_class == FC_PFLASH) {
+ for (i = 0; i < bank_iter->num_prot_blocks; i++) {
+ if (bank_iter->prot_blocks[i].is_protected == 1)
+ fprot &= ~pflash_bit;
+
+ pflash_bit <<= 1;
+ }
- psec += bank->sectors[i].size;
+ } else if (kinfo->flash_class == FC_FLEX_NVM) {
+ for (i = 0; i < bank_iter->num_prot_blocks; i++) {
+ if (bank_iter->prot_blocks[i].is_protected == 1)
+ fdprot &= ~dflash_bit;
- if (psec >= kinfo->protection_size) {
- psec = 0;
- b++;
+ dflash_bit <<= 1;
}
+
}
- } else {
- LOG_ERROR("Protection checks for FlexNVM not yet supported");
- return ERROR_FLASH_BANK_INVALID;
}
+ target_buffer_set_u32(bank->target, fcf + FCF_FPROT, fprot);
+ fcf[FCF_FSEC] = fsec;
+ fcf[FCF_FOPT] = fcf_fopt;
+ fcf[FCF_FDPROT] = fdprot;
return ERROR_OK;
}
-static int kinetis_ftfx_command(struct flash_bank *bank, uint8_t fcmd, uint32_t faddr,
+static int kinetis_ftfx_command(struct target *target, uint8_t fcmd, uint32_t faddr,
uint8_t fccob4, uint8_t fccob5, uint8_t fccob6, uint8_t fccob7,
uint8_t fccob8, uint8_t fccob9, uint8_t fccoba, uint8_t fccobb,
uint8_t *ftfx_fstat)
uint8_t command[12] = {faddr & 0xff, (faddr >> 8) & 0xff, (faddr >> 16) & 0xff, fcmd,
fccob7, fccob6, fccob5, fccob4,
fccobb, fccoba, fccob9, fccob8};
- int result, i;
- uint8_t buffer;
-
- /* wait for done */
- for (i = 0; i < 50; i++) {
- result =
- target_read_memory(bank->target, FTFx_FSTAT, 1, 1, &buffer);
-
- if (result != ERROR_OK)
- return result;
-
- if (buffer & 0x80)
- break;
-
- buffer = 0x00;
- }
-
- if (buffer != 0x80) {
- /* reset error flags */
- buffer = 0x30;
- result =
- target_write_memory(bank->target, FTFx_FSTAT, 1, 1, &buffer);
- if (result != ERROR_OK)
- return result;
- }
-
- result = target_write_memory(bank->target, FTFx_FCCOB3, 4, 3, command);
+ int result;
+ uint8_t fstat;
+ int64_t ms_timeout = timeval_ms() + 250;
+ result = target_write_memory(target, FTFx_FCCOB3, 4, 3, command);
if (result != ERROR_OK)
return result;
/* start command */
- buffer = 0x80;
- result = target_write_memory(bank->target, FTFx_FSTAT, 1, 1, &buffer);
+ result = target_write_u8(target, FTFx_FSTAT, 0x80);
if (result != ERROR_OK)
return result;
/* wait for done */
- for (i = 0; i < 240; i++) { /* Need longtime for "Mass Erase" Command Nemui Changed */
- result =
- target_read_memory(bank->target, FTFx_FSTAT, 1, 1, ftfx_fstat);
+ do {
+ result = target_read_u8(target, FTFx_FSTAT, &fstat);
if (result != ERROR_OK)
return result;
- if (*ftfx_fstat & 0x80)
+ if (fstat & 0x80)
break;
- }
- if ((*ftfx_fstat & 0xf0) != 0x80) {
- LOG_ERROR
- ("ftfx command failed FSTAT: %02X FCCOB: %02X%02X%02X%02X %02X%02X%02X%02X %02X%02X%02X%02X",
- *ftfx_fstat, command[3], command[2], command[1], command[0],
+ } while (timeval_ms() < ms_timeout);
+
+ if (ftfx_fstat)
+ *ftfx_fstat = fstat;
+
+ if ((fstat & 0xf0) != 0x80) {
+ LOG_DEBUG("ftfx command failed FSTAT: %02X FCCOB: %02X%02X%02X%02X %02X%02X%02X%02X %02X%02X%02X%02X",
+ fstat, command[3], command[2], command[1], command[0],
command[7], command[6], command[5], command[4],
command[11], command[10], command[9], command[8]);
- return ERROR_FLASH_OPERATION_FAILED;
+
+ return kinetis_ftfx_decode_error(fstat);
}
return ERROR_OK;
}
-static int kinetis_mass_erase(struct flash_bank *bank)
+
+static int kinetis_check_run_mode(struct target *target)
{
- int result;
- uint8_t ftfx_fstat;
+ int result, i;
+ uint8_t pmctrl, pmstat;
- if (bank->target->state != TARGET_HALTED) {
+ if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- /* check if whole bank is blank */
- LOG_INFO("Execute Erase All Blocks");
- /* set command and sector address */
- result = kinetis_ftfx_command(bank, FTFx_CMD_MASSERASE, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
- /* Anyway Result, write FSEC to unsecure forcely */
- /* if (result != ERROR_OK)
- return result;*/
+ result = target_read_u8(target, SMC_PMSTAT, &pmstat);
+ if (result != ERROR_OK)
+ return result;
- /* Write to MCU security status unsecure in Flash security byte(for Kinetis-L need) */
- LOG_INFO("Write to MCU security status unsecure Anyway!");
- uint8_t padding[4] = {0xFE, 0xFF, 0xFF, 0xFF}; /* Write 0xFFFFFFFE */
+ if (pmstat == PM_STAT_RUN)
+ return ERROR_OK;
- result = kinetis_ftfx_command(bank, FTFx_CMD_LWORDPROG, (bank->base + 0x0000040C),
- padding[3], padding[2], padding[1], padding[0],
- 0, 0, 0, 0, &ftfx_fstat);
- if (result != ERROR_OK)
- return ERROR_FLASH_OPERATION_FAILED;
+ if (pmstat == PM_STAT_VLPR) {
+ /* It is safe to switch from VLPR to RUN mode without changing clock */
+ LOG_INFO("Switching from VLPR to RUN mode.");
+ pmctrl = PM_CTRL_RUNM_RUN;
+ result = target_write_u8(target, SMC_PMCTRL, pmctrl);
+ if (result != ERROR_OK)
+ return result;
- return ERROR_OK;
+ for (i = 100; i; i--) {
+ result = target_read_u8(target, SMC_PMSTAT, &pmstat);
+ if (result != ERROR_OK)
+ return result;
+
+ if (pmstat == PM_STAT_RUN)
+ return ERROR_OK;
+ }
+ }
+
+ LOG_ERROR("Flash operation not possible in current run mode: SMC_PMSTAT: 0x%x", pmstat);
+ LOG_ERROR("Issue a 'reset init' command.");
+ return ERROR_TARGET_NOT_HALTED;
+}
+
+
+static void kinetis_invalidate_flash_cache(struct flash_bank *bank)
+{
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
+
+ if (kinfo->flash_support & FS_INVALIDATE_CACHE_K)
+ target_write_u8(bank->target, FMC_PFB01CR + 2, 0xf0);
+ /* Set CINV_WAY bits - request invalidate of all cache ways */
+ /* FMC_PFB0CR has same address and CINV_WAY bits as FMC_PFB01CR */
+
+ else if (kinfo->flash_support & FS_INVALIDATE_CACHE_L)
+ target_write_u8(bank->target, MCM_PLACR + 1, 0x04);
+ /* set bit CFCC - Clear Flash Controller Cache */
+
+ else if (kinfo->flash_support & FS_INVALIDATE_CACHE_MSCM)
+ target_write_u32(bank->target, MSCM_OCMDR0, 0x30);
+ /* disable data prefetch and flash speculate */
+
+ return;
}
+
static int kinetis_erase(struct flash_bank *bank, int first, int last)
{
int result, i;
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
+ result = kinetis_check_run_mode(bank->target);
+ if (result != ERROR_OK)
+ return result;
+
+ /* reset error flags */
+ result = kinetis_ftfx_prepare(bank->target);
+ if (result != ERROR_OK)
+ return result;
if ((first > bank->num_sectors) || (last > bank->num_sectors))
return ERROR_FLASH_OPERATION_FAILED;
- if ((first == 0) && (last == (bank->num_sectors - 1)))
- return kinetis_mass_erase(bank);
-
/*
* FIXME: TODO: use the 'Erase Flash Block' command if the
* requested erase is PFlash or NVM and encompasses the entire
* block. Should be quicker.
*/
for (i = first; i <= last; i++) {
- uint8_t ftfx_fstat;
/* set command and sector address */
- result = kinetis_ftfx_command(bank, FTFx_CMD_SECTERASE, bank->base + bank->sectors[i].offset,
- 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
+ result = kinetis_ftfx_command(bank->target, FTFx_CMD_SECTERASE, kinfo->prog_base + bank->sectors[i].offset,
+ 0, 0, 0, 0, 0, 0, 0, 0, NULL);
if (result != ERROR_OK) {
LOG_WARNING("erase sector %d failed", i);
}
bank->sectors[i].is_erased = 1;
- }
- if (first == 0) {
- LOG_WARNING
- ("flash configuration field erased, please reset the device");
+ if (bank->base == 0
+ && bank->sectors[i].offset <= FCF_ADDRESS
+ && bank->sectors[i].offset + bank->sectors[i].size > FCF_ADDRESS + FCF_SIZE) {
+ if (allow_fcf_writes) {
+ LOG_WARNING("Flash Configuration Field erased, DO NOT reset or power off the device");
+ LOG_WARNING("until correct FCF is programmed or MCU gets security lock.");
+ } else {
+ uint8_t fcf_buffer[FCF_SIZE];
+
+ kinetis_fill_fcf(bank, fcf_buffer);
+ result = kinetis_write_inner(bank, fcf_buffer, FCF_ADDRESS, FCF_SIZE);
+ if (result != ERROR_OK)
+ LOG_WARNING("Flash Configuration Field write failed");
+ bank->sectors[i].is_erased = 0;
+ }
+ }
}
+ kinetis_invalidate_flash_cache(bank);
+
return ERROR_OK;
}
-static int kinetis_write(struct flash_bank *bank, uint8_t *buffer,
- uint32_t offset, uint32_t count)
+static int kinetis_make_ram_ready(struct target *target)
{
- unsigned int i, result, fallback = 0;
- uint8_t buf[8];
- uint32_t wc;
- struct kinetis_flash_bank *kinfo = bank->driver_priv;
- uint8_t *new_buffer = NULL;
+ int result;
+ uint8_t ftfx_fcnfg;
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
+ /* check if ram ready */
+ result = target_read_u8(target, FTFx_FCNFG, &ftfx_fcnfg);
+ if (result != ERROR_OK)
+ return result;
- if (kinfo->klxx) {
- /* fallback to longword write */
- fallback = 1;
- LOG_WARNING("Kinetis L Series supports Program Longword execution only.");
- LOG_DEBUG("flash write into PFLASH @08%" PRIX32, offset);
+ if (ftfx_fcnfg & (1 << 1))
+ return ERROR_OK; /* ram ready */
- } else if (kinfo->flash_class == FC_FLEX_NVM) {
+ /* make flex ram available */
+ result = kinetis_ftfx_command(target, FTFx_CMD_SETFLEXRAM, 0x00ff0000,
+ 0, 0, 0, 0, 0, 0, 0, 0, NULL);
+ if (result != ERROR_OK)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ /* check again */
+ result = target_read_u8(target, FTFx_FCNFG, &ftfx_fcnfg);
+ if (result != ERROR_OK)
+ return result;
+
+ if (ftfx_fcnfg & (1 << 1))
+ return ERROR_OK; /* ram ready */
+
+ return ERROR_FLASH_OPERATION_FAILED;
+}
+
+
+static int kinetis_write_sections(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t count)
+{
+ int result = ERROR_OK;
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
+ uint8_t *buffer_aligned = NULL;
+ /*
+ * Kinetis uses different terms for the granularity of
+ * sector writes, e.g. "phrase" or "128 bits". We use
+ * the generic term "chunk". The largest possible
+ * Kinetis "chunk" is 16 bytes (128 bits).
+ */
+ uint32_t prog_section_chunk_bytes = kinfo->sector_size >> 8;
+ uint32_t prog_size_bytes = kinfo->max_flash_prog_size;
+
+ while (count > 0) {
+ uint32_t size = prog_size_bytes - offset % prog_size_bytes;
+ uint32_t align_begin = offset % prog_section_chunk_bytes;
+ uint32_t align_end;
+ uint32_t size_aligned;
+ uint16_t chunk_count;
uint8_t ftfx_fstat;
- LOG_DEBUG("flash write into FlexNVM @%08" PRIX32, offset);
+ if (size > count)
+ size = count;
- /* make flex ram available */
- result = kinetis_ftfx_command(bank, FTFx_CMD_SETFLEXRAM, 0x00ff0000, 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
+ align_end = (align_begin + size) % prog_section_chunk_bytes;
+ if (align_end)
+ align_end = prog_section_chunk_bytes - align_end;
- if (result != ERROR_OK)
- return ERROR_FLASH_OPERATION_FAILED;
+ size_aligned = align_begin + size + align_end;
+ chunk_count = size_aligned / prog_section_chunk_bytes;
- /* check if ram ready */
- result = target_read_memory(bank->target, FTFx_FCNFG, 1, 1, buf);
+ if (size != size_aligned) {
+ /* aligned section: the first, the last or the only */
+ if (!buffer_aligned)
+ buffer_aligned = malloc(prog_size_bytes);
- if (result != ERROR_OK)
- return result;
+ memset(buffer_aligned, 0xff, size_aligned);
+ memcpy(buffer_aligned + align_begin, buffer, size);
- if (!(buf[0] & (1 << 1))) {
- /* fallback to longword write */
- fallback = 1;
+ result = target_write_memory(bank->target, FLEXRAM,
+ 4, size_aligned / 4, buffer_aligned);
- LOG_WARNING("ram not ready, fallback to slow longword write (FCNFG: %02X)", buf[0]);
- }
- } else {
- LOG_DEBUG("flash write into PFLASH @08%" PRIX32, offset);
- }
+ LOG_DEBUG("section @ %08" PRIx32 " aligned begin %" PRIu32 ", end %" PRIu32,
+ bank->base + offset, align_begin, align_end);
+ } else
+ result = target_write_memory(bank->target, FLEXRAM,
+ 4, size_aligned / 4, buffer);
+ LOG_DEBUG("write section @ %08" PRIx32 " with length %" PRIu32 " bytes",
+ bank->base + offset, size);
- /* program section command */
- if (fallback == 0) {
- /*
- * Kinetis uses different terms for the granularity of
- * sector writes, e.g. "phrase" or "128 bits". We use
- * the generic term "chunk". The largest possible
- * Kinetis "chunk" is 16 bytes (128 bits).
- */
- unsigned prog_section_chunk_bytes = kinfo->sector_size >> 8;
- /* assume the NVM sector size is half the FlexRAM size */
- unsigned prog_size_bytes = MIN(kinfo->sector_size,
- kinetis_flash_params[kinfo->granularity].nvm_sector_size_bytes);
- for (i = 0; i < count; i += prog_size_bytes) {
- uint8_t residual_buffer[16];
- uint8_t ftfx_fstat;
- uint32_t section_count = prog_size_bytes / prog_section_chunk_bytes;
- uint32_t residual_wc = 0;
-
- /*
- * Assume the word count covers an entire
- * sector.
- */
- wc = prog_size_bytes / 4;
-
- /*
- * If bytes to be programmed are less than the
- * full sector, then determine the number of
- * full-words to program, and put together the
- * residual buffer so that a full "section"
- * may always be programmed.
- */
- if ((count - i) < prog_size_bytes) {
- /* number of bytes to program beyond full section */
- unsigned residual_bc = (count-i) % prog_section_chunk_bytes;
-
- /* number of complete words to copy directly from buffer */
- wc = (count - i) / 4;
-
- /* number of total sections to write, including residual */
- section_count = DIV_ROUND_UP((count-i), prog_section_chunk_bytes);
-
- /* any residual bytes delivers a whole residual section */
- residual_wc = (residual_bc ? prog_section_chunk_bytes : 0)/4;
-
- /* clear residual buffer then populate residual bytes */
- (void) memset(residual_buffer, 0xff, prog_section_chunk_bytes);
- (void) memcpy(residual_buffer, &buffer[i+4*wc], residual_bc);
- }
+ if (result != ERROR_OK) {
+ LOG_ERROR("target_write_memory failed");
+ break;
+ }
- LOG_DEBUG("write section @ %08" PRIX32 " with length %" PRIu32 " bytes",
- offset + i, (uint32_t)wc*4);
+ /* execute section-write command */
+ result = kinetis_ftfx_command(bank->target, FTFx_CMD_SECTWRITE,
+ kinfo->prog_base + offset - align_begin,
+ chunk_count>>8, chunk_count, 0, 0,
+ 0, 0, 0, 0, &ftfx_fstat);
- /* write data to flexram as whole-words */
- result = target_write_memory(bank->target, FLEXRAM, 4, wc,
- buffer + i);
+ if (result != ERROR_OK) {
+ LOG_ERROR("Error writing section at %08" PRIx32, bank->base + offset);
+ break;
+ }
- if (result != ERROR_OK) {
- LOG_ERROR("target_write_memory failed");
- return result;
- }
+ if (ftfx_fstat & 0x01)
+ LOG_ERROR("Flash write error at %08" PRIx32, bank->base + offset);
- /* write the residual words to the flexram */
- if (residual_wc) {
- result = target_write_memory(bank->target,
- FLEXRAM+4*wc,
- 4, residual_wc,
- residual_buffer);
+ buffer += size;
+ offset += size;
+ count -= size;
+ }
- if (result != ERROR_OK) {
- LOG_ERROR("target_write_memory failed");
- return result;
- }
- }
+ free(buffer_aligned);
+ return result;
+}
- /* execute section-write command */
- result = kinetis_ftfx_command(bank, FTFx_CMD_SECTWRITE, bank->base + offset + i,
- section_count>>8, section_count, 0, 0,
- 0, 0, 0, 0, &ftfx_fstat);
- if (result != ERROR_OK)
- return ERROR_FLASH_OPERATION_FAILED;
+static int kinetis_write_inner(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t count)
+{
+ int result, fallback = 0;
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
+
+ if (!(kinfo->flash_support & FS_PROGRAM_SECTOR)) {
+ /* fallback to longword write */
+ fallback = 1;
+ LOG_INFO("This device supports Program Longword execution only.");
+ } else {
+ result = kinetis_make_ram_ready(bank->target);
+ if (result != ERROR_OK) {
+ fallback = 1;
+ LOG_WARNING("FlexRAM not ready, fallback to slow longword write.");
}
}
- /* program longword command, not supported in "SF3" devices */
- else if ((kinfo->granularity != 3) || (kinfo->klxx)) {
+
+ LOG_DEBUG("flash write @08%" PRIx32, bank->base + offset);
+
+ if (fallback == 0) {
+ /* program section command */
+ kinetis_write_sections(bank, buffer, offset, count);
+ }
+ else if (kinfo->flash_support & FS_PROGRAM_LONGWORD) {
+ /* program longword command, not supported in FTFE */
+ uint8_t *new_buffer = NULL;
+
+ /* check word alignment */
+ if (offset & 0x3) {
+ LOG_ERROR("offset 0x%" PRIx32 " breaks the required alignment", offset);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
if (count & 0x3) {
uint32_t old_count = count;
}
LOG_INFO("odd number of bytes to write (%" PRIu32 "), extending to %" PRIu32 " "
"and padding with 0xff", old_count, count);
- memset(buffer, 0xff, count);
+ memset(new_buffer + old_count, 0xff, count - old_count);
buffer = memcpy(new_buffer, buffer, old_count);
}
uint32_t words_remaining = count / 4;
- /* try using a block write */
- int retval = kinetis_write_block(bank, buffer, offset, words_remaining);
+ kinetis_disable_wdog(bank->target, kinfo->sim_sdid);
+
+ /* try using a block write */
+ result = kinetis_write_block(bank, buffer, offset, words_remaining);
+
+ if (result == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
+ /* if block write failed (no sufficient working area),
+ * we use normal (slow) single word accesses */
+ LOG_WARNING("couldn't use block writes, falling back to single "
+ "memory accesses");
+
+ while (words_remaining) {
+ uint8_t ftfx_fstat;
+
+ LOG_DEBUG("write longword @ %08" PRIx32, (uint32_t)(bank->base + offset));
+
+ result = kinetis_ftfx_command(bank->target, FTFx_CMD_LWORDPROG, kinfo->prog_base + offset,
+ buffer[3], buffer[2], buffer[1], buffer[0],
+ 0, 0, 0, 0, &ftfx_fstat);
+
+ if (result != ERROR_OK) {
+ LOG_ERROR("Error writing longword at %08" PRIx32, bank->base + offset);
+ break;
+ }
+
+ if (ftfx_fstat & 0x01)
+ LOG_ERROR("Flash write error at %08" PRIx32, bank->base + offset);
+
+ buffer += 4;
+ offset += 4;
+ words_remaining--;
+ }
+ }
+ free(new_buffer);
+ } else {
+ LOG_ERROR("Flash write strategy not implemented");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ kinetis_invalidate_flash_cache(bank);
+ return result;
+}
+
+
+static int kinetis_write(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t count)
+{
+ int result;
+ bool set_fcf = false;
+ int sect = 0;
+
+ result = kinetis_check_run_mode(bank->target);
+ if (result != ERROR_OK)
+ return result;
+
+ /* reset error flags */
+ result = kinetis_ftfx_prepare(bank->target);
+ if (result != ERROR_OK)
+ return result;
+
+ if (bank->base == 0 && !allow_fcf_writes) {
+ if (bank->sectors[1].offset <= FCF_ADDRESS)
+ sect = 1; /* 1kb sector, FCF in 2nd sector */
- if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
- /* if block write failed (no sufficient working area),
- * we use normal (slow) single word accesses */
- LOG_WARNING("couldn't use block writes, falling back to single "
- "memory accesses");
+ if (offset < bank->sectors[sect].offset + bank->sectors[sect].size
+ && offset + count > bank->sectors[sect].offset)
+ set_fcf = true; /* write to any part of sector with FCF */
+ }
- for (i = 0; i < count; i += 4) {
- uint8_t ftfx_fstat;
+ if (set_fcf) {
+ uint8_t fcf_buffer[FCF_SIZE];
+ uint8_t fcf_current[FCF_SIZE];
- LOG_DEBUG("write longword @ %08" PRIX32, (uint32_t)(offset + i));
+ kinetis_fill_fcf(bank, fcf_buffer);
- uint8_t padding[4] = {0xff, 0xff, 0xff, 0xff};
- memcpy(padding, buffer + i, MIN(4, count-i));
+ if (offset < FCF_ADDRESS) {
+ /* write part preceding FCF */
+ result = kinetis_write_inner(bank, buffer, offset, FCF_ADDRESS - offset);
+ if (result != ERROR_OK)
+ return result;
+ }
- result = kinetis_ftfx_command(bank, FTFx_CMD_LWORDPROG, bank->base + offset + i,
- padding[3], padding[2], padding[1], padding[0],
- 0, 0, 0, 0, &ftfx_fstat);
+ result = target_read_memory(bank->target, FCF_ADDRESS, 4, FCF_SIZE / 4, fcf_current);
+ if (result == ERROR_OK && memcmp(fcf_current, fcf_buffer, FCF_SIZE) == 0)
+ set_fcf = false;
- if (result != ERROR_OK)
- return ERROR_FLASH_OPERATION_FAILED;
- }
+ if (set_fcf) {
+ /* write FCF if differs from flash - eliminate multiple writes */
+ result = kinetis_write_inner(bank, fcf_buffer, FCF_ADDRESS, FCF_SIZE);
+ if (result != ERROR_OK)
+ return result;
}
- } else {
- LOG_ERROR("Flash write strategy not implemented");
- return ERROR_FLASH_OPERATION_FAILED;
- }
+ LOG_WARNING("Flash Configuration Field written.");
+ LOG_WARNING("Reset or power off the device to make settings effective.");
- return ERROR_OK;
+ if (offset + count > FCF_ADDRESS + FCF_SIZE) {
+ uint32_t delta = FCF_ADDRESS + FCF_SIZE - offset;
+ /* write part after FCF */
+ result = kinetis_write_inner(bank, buffer + delta, FCF_ADDRESS + FCF_SIZE, count - delta);
+ }
+ return result;
+
+ } else
+ /* no FCF fiddling, normal write */
+ return kinetis_write_inner(bank, buffer, offset, count);
}
-static int kinetis_read_part_info(struct flash_bank *bank)
+
+static int kinetis_probe(struct flash_bank *bank)
{
int result, i;
- uint32_t offset = 0;
- uint8_t fcfg1_nvmsize, fcfg1_pfsize, fcfg1_eesize, fcfg2_pflsh;
- uint32_t nvm_size = 0, pf_size = 0, ee_size = 0;
- unsigned granularity, num_blocks = 0, num_pflash_blocks = 0, num_nvm_blocks = 0,
- first_nvm_bank = 0, reassign = 0;
+ uint8_t fcfg1_nvmsize, fcfg1_pfsize, fcfg1_eesize, fcfg1_depart;
+ uint8_t fcfg2_maxaddr0, fcfg2_pflsh, fcfg2_maxaddr1;
+ uint32_t nvm_size = 0, pf_size = 0, df_size = 0, ee_size = 0;
+ unsigned num_blocks = 0, num_pflash_blocks = 0, num_nvm_blocks = 0, first_nvm_bank = 0,
+ pflash_sector_size_bytes = 0, nvm_sector_size_bytes = 0;
struct target *target = bank->target;
struct kinetis_flash_bank *kinfo = bank->driver_priv;
+ kinfo->probed = false;
+
result = target_read_u32(target, SIM_SDID, &kinfo->sim_sdid);
if (result != ERROR_OK)
return result;
- kinfo->klxx = 0;
-
- /* K-series MCU? */
if ((kinfo->sim_sdid & (~KINETIS_SDID_K_SERIES_MASK)) == 0) {
+ /* older K-series MCU */
uint32_t mcu_type = kinfo->sim_sdid & KINETIS_K_SDID_TYPE_MASK;
switch (mcu_type) {
case KINETIS_K_SDID_K10_M50:
case KINETIS_K_SDID_K20_M50:
/* 1kB sectors */
- granularity = 0;
+ pflash_sector_size_bytes = 1<<10;
+ nvm_sector_size_bytes = 1<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE_K;
break;
case KINETIS_K_SDID_K10_M72:
case KINETIS_K_SDID_K20_M72:
case KINETIS_K_SDID_K40_M100:
case KINETIS_K_SDID_K50_M72:
/* 2kB sectors, 1kB FlexNVM sectors */
- granularity = 1;
+ pflash_sector_size_bytes = 2<<10;
+ nvm_sector_size_bytes = 1<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE_K;
+ kinfo->max_flash_prog_size = 1<<10;
break;
case KINETIS_K_SDID_K10_M100:
case KINETIS_K_SDID_K20_M100:
case KINETIS_K_SDID_K53:
case KINETIS_K_SDID_K60_M100:
/* 2kB sectors */
- granularity = 2;
+ pflash_sector_size_bytes = 2<<10;
+ nvm_sector_size_bytes = 2<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE_K;
break;
- case KINETIS_K_SDID_K10_M120:
- case KINETIS_K_SDID_K20_M120:
case KINETIS_K_SDID_K21_M120:
case KINETIS_K_SDID_K22_M120:
+ /* 4kB sectors (MK21FN1M0, MK21FX512, MK22FN1M0, MK22FX512) */
+ pflash_sector_size_bytes = 4<<10;
+ kinfo->max_flash_prog_size = 1<<10;
+ nvm_sector_size_bytes = 4<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE_K;
+ break;
+ case KINETIS_K_SDID_K10_M120:
+ case KINETIS_K_SDID_K20_M120:
case KINETIS_K_SDID_K60_M150:
case KINETIS_K_SDID_K70_M150:
/* 4kB sectors */
- granularity = 3;
+ pflash_sector_size_bytes = 4<<10;
+ nvm_sector_size_bytes = 4<<10;
+ num_blocks = 4;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE_K;
break;
default:
LOG_ERROR("Unsupported K-family FAMID");
- return ERROR_FLASH_OPER_UNSUPPORTED;
}
- }
- /* KL-series? */
- else if ((kinfo->sim_sdid & KINETIS_KL_SDID_SERIESID_MASK) == KINETIS_KL_SDID_SERIESID_KL) {
- kinfo->klxx = 1;
- granularity = 0;
} else {
- LOG_ERROR("MCU is unsupported");
+ /* Newer K-series or KL series MCU */
+ switch (kinfo->sim_sdid & KINETIS_SDID_SERIESID_MASK) {
+ case KINETIS_SDID_SERIESID_K:
+ switch (kinfo->sim_sdid & (KINETIS_SDID_FAMILYID_MASK | KINETIS_SDID_SUBFAMID_MASK)) {
+ case KINETIS_SDID_FAMILYID_K0X | KINETIS_SDID_SUBFAMID_KX2:
+ /* K02FN64, K02FN128: FTFA, 2kB sectors */
+ pflash_sector_size_bytes = 2<<10;
+ num_blocks = 1;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE_K;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K2X | KINETIS_SDID_SUBFAMID_KX2: {
+ /* MK24FN1M reports as K22, this should detect it (according to errata note 1N83J) */
+ uint32_t sopt1;
+ result = target_read_u32(target, SIM_SOPT1, &sopt1);
+ if (result != ERROR_OK)
+ return result;
+
+ if (((kinfo->sim_sdid & (KINETIS_SDID_DIEID_MASK)) == KINETIS_SDID_DIEID_K24FN1M) &&
+ ((sopt1 & KINETIS_SOPT1_RAMSIZE_MASK) == KINETIS_SOPT1_RAMSIZE_K24FN1M)) {
+ /* MK24FN1M */
+ pflash_sector_size_bytes = 4<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE_K;
+ kinfo->max_flash_prog_size = 1<<10;
+ break;
+ }
+ if ((kinfo->sim_sdid & (KINETIS_SDID_DIEID_MASK)) == KINETIS_SDID_DIEID_K22FN128
+ || (kinfo->sim_sdid & (KINETIS_SDID_DIEID_MASK)) == KINETIS_SDID_DIEID_K22FN256
+ || (kinfo->sim_sdid & (KINETIS_SDID_DIEID_MASK)) == KINETIS_SDID_DIEID_K22FN512) {
+ /* K22 with new-style SDID - smaller pflash with FTFA, 2kB sectors */
+ pflash_sector_size_bytes = 2<<10;
+ /* autodetect 1 or 2 blocks */
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE_K;
+ break;
+ }
+ LOG_ERROR("Unsupported Kinetis K22 DIEID");
+ break;
+ }
+ case KINETIS_SDID_FAMILYID_K2X | KINETIS_SDID_SUBFAMID_KX4:
+ pflash_sector_size_bytes = 4<<10;
+ if ((kinfo->sim_sdid & (KINETIS_SDID_DIEID_MASK)) == KINETIS_SDID_DIEID_K24FN256) {
+ /* K24FN256 - smaller pflash with FTFA */
+ num_blocks = 1;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE_K;
+ break;
+ }
+ /* K24FN1M without errata 7534 */
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE_K;
+ kinfo->max_flash_prog_size = 1<<10;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K6X | KINETIS_SDID_SUBFAMID_KX3:
+ case KINETIS_SDID_FAMILYID_K6X | KINETIS_SDID_SUBFAMID_KX1: /* errata 7534 - should be K63 */
+ /* K63FN1M0 */
+ case KINETIS_SDID_FAMILYID_K6X | KINETIS_SDID_SUBFAMID_KX4:
+ case KINETIS_SDID_FAMILYID_K6X | KINETIS_SDID_SUBFAMID_KX2: /* errata 7534 - should be K64 */
+ /* K64FN1M0, K64FX512 */
+ pflash_sector_size_bytes = 4<<10;
+ nvm_sector_size_bytes = 4<<10;
+ kinfo->max_flash_prog_size = 1<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE_K;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K2X | KINETIS_SDID_SUBFAMID_KX6:
+ /* K26FN2M0 */
+ case KINETIS_SDID_FAMILYID_K6X | KINETIS_SDID_SUBFAMID_KX6:
+ /* K66FN2M0, K66FX1M0 */
+ pflash_sector_size_bytes = 4<<10;
+ nvm_sector_size_bytes = 4<<10;
+ kinfo->max_flash_prog_size = 1<<10;
+ num_blocks = 4;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE_K;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K8X | KINETIS_SDID_SUBFAMID_KX0:
+ case KINETIS_SDID_FAMILYID_K8X | KINETIS_SDID_SUBFAMID_KX1:
+ case KINETIS_SDID_FAMILYID_K8X | KINETIS_SDID_SUBFAMID_KX2:
+ /* K80FN256, K81FN256, K82FN256 */
+ pflash_sector_size_bytes = 4<<10;
+ num_blocks = 1;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE_K;
+ break;
+
+ default:
+ LOG_ERROR("Unsupported Kinetis FAMILYID SUBFAMID");
+ }
+ break;
+
+ case KINETIS_SDID_SERIESID_KL:
+ /* KL-series */
+ pflash_sector_size_bytes = 1<<10;
+ nvm_sector_size_bytes = 1<<10;
+ /* autodetect 1 or 2 blocks */
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE_L;
+ break;
+
+ case KINETIS_SDID_SERIESID_KV:
+ /* KV-series */
+ switch (kinfo->sim_sdid & (KINETIS_SDID_FAMILYID_MASK | KINETIS_SDID_SUBFAMID_MASK)) {
+ case KINETIS_SDID_FAMILYID_K1X | KINETIS_SDID_SUBFAMID_KX0:
+ /* KV10: FTFA, 1kB sectors */
+ pflash_sector_size_bytes = 1<<10;
+ num_blocks = 1;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE_L;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K1X | KINETIS_SDID_SUBFAMID_KX1:
+ /* KV11: FTFA, 2kB sectors */
+ pflash_sector_size_bytes = 2<<10;
+ num_blocks = 1;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE_L;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K3X | KINETIS_SDID_SUBFAMID_KX0:
+ /* KV30: FTFA, 2kB sectors, 1 block */
+ case KINETIS_SDID_FAMILYID_K3X | KINETIS_SDID_SUBFAMID_KX1:
+ /* KV31: FTFA, 2kB sectors, 2 blocks */
+ pflash_sector_size_bytes = 2<<10;
+ /* autodetect 1 or 2 blocks */
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE_K;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K4X | KINETIS_SDID_SUBFAMID_KX2:
+ case KINETIS_SDID_FAMILYID_K4X | KINETIS_SDID_SUBFAMID_KX4:
+ case KINETIS_SDID_FAMILYID_K4X | KINETIS_SDID_SUBFAMID_KX6:
+ /* KV4x: FTFA, 4kB sectors */
+ pflash_sector_size_bytes = 4<<10;
+ num_blocks = 1;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE_K;
+ break;
+
+ default:
+ LOG_ERROR("Unsupported KV FAMILYID SUBFAMID");
+ }
+ break;
+
+ case KINETIS_SDID_SERIESID_KE:
+ /* KE1x-series */
+ switch (kinfo->sim_sdid &
+ (KINETIS_SDID_FAMILYID_MASK | KINETIS_SDID_SUBFAMID_MASK | KINETIS_SDID_PROJECTID_MASK)) {
+ case KINETIS_SDID_FAMILYID_K1X | KINETIS_SDID_SUBFAMID_KX4 | KINETIS_SDID_PROJECTID_KE1xZ:
+ case KINETIS_SDID_FAMILYID_K1X | KINETIS_SDID_SUBFAMID_KX5 | KINETIS_SDID_PROJECTID_KE1xZ:
+ /* KE1xZ: FTFE, 2kB sectors */
+ pflash_sector_size_bytes = 2<<10;
+ nvm_sector_size_bytes = 2<<10;
+ kinfo->max_flash_prog_size = 1<<9;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE_L;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K1X | KINETIS_SDID_SUBFAMID_KX4 | KINETIS_SDID_PROJECTID_KE1xF:
+ case KINETIS_SDID_FAMILYID_K1X | KINETIS_SDID_SUBFAMID_KX6 | KINETIS_SDID_PROJECTID_KE1xF:
+ case KINETIS_SDID_FAMILYID_K1X | KINETIS_SDID_SUBFAMID_KX8 | KINETIS_SDID_PROJECTID_KE1xF:
+ /* KE1xF: FTFE, 4kB sectors */
+ pflash_sector_size_bytes = 4<<10;
+ nvm_sector_size_bytes = 2<<10;
+ kinfo->max_flash_prog_size = 1<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE_MSCM;
+ break;
+
+ default:
+ LOG_ERROR("Unsupported KE FAMILYID SUBFAMID");
+ }
+ break;
+
+ default:
+ LOG_ERROR("Unsupported K-series");
+ }
+ }
+
+ if (pflash_sector_size_bytes == 0) {
+ LOG_ERROR("MCU is unsupported, SDID 0x%08" PRIx32, kinfo->sim_sdid);
return ERROR_FLASH_OPER_UNSUPPORTED;
}
result = target_read_u32(target, SIM_FCFG2, &kinfo->sim_fcfg2);
if (result != ERROR_OK)
return result;
- fcfg2_pflsh = (kinfo->sim_fcfg2 >> 23) & 0x01;
LOG_DEBUG("SDID: 0x%08" PRIX32 " FCFG1: 0x%08" PRIX32 " FCFG2: 0x%08" PRIX32, kinfo->sim_sdid,
kinfo->sim_fcfg1, kinfo->sim_fcfg2);
fcfg1_nvmsize = (uint8_t)((kinfo->sim_fcfg1 >> 28) & 0x0f);
fcfg1_pfsize = (uint8_t)((kinfo->sim_fcfg1 >> 24) & 0x0f);
fcfg1_eesize = (uint8_t)((kinfo->sim_fcfg1 >> 16) & 0x0f);
+ fcfg1_depart = (uint8_t)((kinfo->sim_fcfg1 >> 8) & 0x0f);
+
+ fcfg2_pflsh = (uint8_t)((kinfo->sim_fcfg2 >> 23) & 0x01);
+ fcfg2_maxaddr0 = (uint8_t)((kinfo->sim_fcfg2 >> 24) & 0x7f);
+ fcfg2_maxaddr1 = (uint8_t)((kinfo->sim_fcfg2 >> 16) & 0x7f);
+
+ if (num_blocks == 0)
+ num_blocks = fcfg2_maxaddr1 ? 2 : 1;
+ else if (fcfg2_maxaddr1 == 0 && num_blocks >= 2) {
+ num_blocks = 1;
+ LOG_WARNING("MAXADDR1 is zero, number of flash banks adjusted to 1");
+ } else if (fcfg2_maxaddr1 != 0 && num_blocks == 1) {
+ num_blocks = 2;
+ LOG_WARNING("MAXADDR1 is non zero, number of flash banks adjusted to 2");
+ }
/* when the PFLSH bit is set, there is no FlexNVM/FlexRAM */
if (!fcfg2_pflsh) {
switch (fcfg1_nvmsize) {
case 0x03:
+ case 0x05:
case 0x07:
case 0x09:
case 0x0b:
nvm_size = 1 << (14 + (fcfg1_nvmsize >> 1));
break;
case 0x0f:
- if (granularity == 3)
+ if (pflash_sector_size_bytes >= 4<<10)
nvm_size = 512<<10;
else
+ /* K20_100 */
nvm_size = 256<<10;
break;
default:
ee_size = 0;
break;
}
+
+ switch (fcfg1_depart) {
+ case 0x01:
+ case 0x02:
+ case 0x03:
+ case 0x04:
+ case 0x05:
+ case 0x06:
+ df_size = nvm_size - (4096 << fcfg1_depart);
+ break;
+ case 0x08:
+ df_size = 0;
+ break;
+ case 0x09:
+ case 0x0a:
+ case 0x0b:
+ case 0x0c:
+ case 0x0d:
+ df_size = 4096 << (fcfg1_depart & 0x7);
+ break;
+ default:
+ df_size = nvm_size;
+ break;
+ }
}
switch (fcfg1_pfsize) {
pf_size = 1 << (14 + (fcfg1_pfsize >> 1));
break;
case 0x0f:
- if (granularity == 3)
- pf_size = 1024<<10;
- else if (fcfg2_pflsh)
- pf_size = 512<<10;
+ /* a peculiar case: Freescale states different sizes for 0xf
+ * K02P64M100SFARM 128 KB ... duplicate of code 0x7
+ * K22P121M120SF8RM 256 KB ... duplicate of code 0x9
+ * K22P121M120SF7RM 512 KB ... duplicate of code 0xb
+ * K22P100M120SF5RM 1024 KB ... duplicate of code 0xd
+ * K26P169M180SF5RM 2048 KB ... the only unique value
+ * fcfg2_maxaddr0 seems to be the only clue to pf_size
+ * Checking fcfg2_maxaddr0 later in this routine is pointless then
+ */
+ if (fcfg2_pflsh)
+ pf_size = ((uint32_t)fcfg2_maxaddr0 << 13) * num_blocks;
else
- pf_size = 256<<10;
+ pf_size = ((uint32_t)fcfg2_maxaddr0 << 13) * num_blocks / 2;
+ if (pf_size != 2048<<10)
+ LOG_WARNING("SIM_FCFG1 PFSIZE = 0xf: please check if pflash is %u KB", pf_size>>10);
+
break;
default:
pf_size = 0;
LOG_DEBUG("FlexNVM: %" PRIu32 " PFlash: %" PRIu32 " FlexRAM: %" PRIu32 " PFLSH: %d",
nvm_size, pf_size, ee_size, fcfg2_pflsh);
- if (kinfo->klxx)
- num_blocks = 1;
- else
- num_blocks = kinetis_flash_params[granularity].num_blocks;
num_pflash_blocks = num_blocks / (2 - fcfg2_pflsh);
first_nvm_bank = num_pflash_blocks;
LOG_DEBUG("%d blocks total: %d PFlash, %d FlexNVM",
num_blocks, num_pflash_blocks, num_nvm_blocks);
- /*
- * If the flash class is already assigned, verify the
- * parameters.
- */
- if (kinfo->flash_class != FC_AUTO) {
- if (kinfo->bank_ordinal != (unsigned) bank->bank_number) {
- LOG_WARNING("Flash ordinal/bank number mismatch");
- reassign = 1;
- } else if (kinfo->granularity != granularity) {
- LOG_WARNING("Flash granularity mismatch");
- reassign = 1;
- } else {
- switch (kinfo->flash_class) {
- case FC_PFLASH:
- if (kinfo->bank_ordinal >= first_nvm_bank) {
- LOG_WARNING("Class mismatch, bank %d is not PFlash", bank->bank_number);
- reassign = 1;
- } else if (bank->size != (pf_size / num_pflash_blocks)) {
- LOG_WARNING("PFlash size mismatch");
- reassign = 1;
- } else if (bank->base !=
- (0x00000000 + bank->size * kinfo->bank_ordinal)) {
- LOG_WARNING("PFlash address range mismatch");
- reassign = 1;
- } else if (kinfo->sector_size !=
- kinetis_flash_params[granularity].pflash_sector_size_bytes) {
- LOG_WARNING("PFlash sector size mismatch");
- reassign = 1;
- } else {
- LOG_DEBUG("PFlash bank %d already configured okay",
- kinfo->bank_ordinal);
- }
- break;
- case FC_FLEX_NVM:
- if ((kinfo->bank_ordinal >= num_blocks) ||
- (kinfo->bank_ordinal < first_nvm_bank)) {
- LOG_WARNING("Class mismatch, bank %d is not FlexNVM", bank->bank_number);
- reassign = 1;
- } else if (bank->size != (nvm_size / num_nvm_blocks)) {
- LOG_WARNING("FlexNVM size mismatch");
- reassign = 1;
- } else if (bank->base !=
- (0x10000000 + bank->size * kinfo->bank_ordinal)) {
- LOG_WARNING("FlexNVM address range mismatch");
- reassign = 1;
- } else if (kinfo->sector_size !=
- kinetis_flash_params[granularity].nvm_sector_size_bytes) {
- LOG_WARNING("FlexNVM sector size mismatch");
- reassign = 1;
- } else {
- LOG_DEBUG("FlexNVM bank %d already configured okay",
- kinfo->bank_ordinal);
- }
- break;
- case FC_FLEX_RAM:
- if (kinfo->bank_ordinal != num_blocks) {
- LOG_WARNING("Class mismatch, bank %d is not FlexRAM", bank->bank_number);
- reassign = 1;
- } else if (bank->size != ee_size) {
- LOG_WARNING("FlexRAM size mismatch");
- reassign = 1;
- } else if (bank->base != FLEXRAM) {
- LOG_WARNING("FlexRAM address mismatch");
- reassign = 1;
- } else if (kinfo->sector_size !=
- kinetis_flash_params[granularity].nvm_sector_size_bytes) {
- LOG_WARNING("FlexRAM sector size mismatch");
- reassign = 1;
- } else {
- LOG_DEBUG("FlexRAM bank %d already configured okay", kinfo->bank_ordinal);
- }
- break;
-
- default:
- LOG_WARNING("Unknown or inconsistent flash class");
- reassign = 1;
- break;
- }
- }
- } else {
- LOG_INFO("Probing flash info for bank %d", bank->bank_number);
- reassign = 1;
- }
-
- if (!reassign)
- return ERROR_OK;
-
- kinfo->granularity = granularity;
+ LOG_INFO("Probing flash info for bank %d", bank->bank_number);
if ((unsigned)bank->bank_number < num_pflash_blocks) {
/* pflash, banks start at address zero */
kinfo->flash_class = FC_PFLASH;
bank->size = (pf_size / num_pflash_blocks);
bank->base = 0x00000000 + bank->size * bank->bank_number;
- kinfo->sector_size = kinetis_flash_params[granularity].pflash_sector_size_bytes;
- kinfo->protection_size = pf_size / 32;
+ kinfo->prog_base = bank->base;
+ kinfo->sector_size = pflash_sector_size_bytes;
+ /* pflash is divided into 32 protection areas for
+ * parts with more than 32K of PFlash. For parts with
+ * less the protection unit is set to 1024 bytes */
+ kinfo->protection_size = MAX(pf_size / 32, 1024);
+ bank->num_prot_blocks = 32 / num_pflash_blocks;
+ kinfo->protection_block = bank->num_prot_blocks * bank->bank_number;
+
} else if ((unsigned)bank->bank_number < num_blocks) {
/* nvm, banks start at address 0x10000000 */
+ unsigned nvm_ord = bank->bank_number - first_nvm_bank;
+ uint32_t limit;
+
kinfo->flash_class = FC_FLEX_NVM;
bank->size = (nvm_size / num_nvm_blocks);
- bank->base = 0x10000000 + bank->size * (bank->bank_number - first_nvm_bank);
- kinfo->sector_size = kinetis_flash_params[granularity].nvm_sector_size_bytes;
- kinfo->protection_size = 0; /* FIXME: TODO: depends on DEPART bits, chip */
+ bank->base = 0x10000000 + bank->size * nvm_ord;
+ kinfo->prog_base = 0x00800000 + bank->size * nvm_ord;
+ kinfo->sector_size = nvm_sector_size_bytes;
+ if (df_size == 0) {
+ kinfo->protection_size = 0;
+ } else {
+ for (i = df_size; ~i & 1; i >>= 1)
+ ;
+ if (i == 1)
+ kinfo->protection_size = df_size / 8; /* data flash size = 2^^n */
+ else
+ kinfo->protection_size = nvm_size / 8; /* TODO: verify on SF1, not documented in RM */
+ }
+ bank->num_prot_blocks = 8 / num_nvm_blocks;
+ kinfo->protection_block = bank->num_prot_blocks * nvm_ord;
+
+ /* EEPROM backup part of FlexNVM is not accessible, use df_size as a limit */
+ if (df_size > bank->size * nvm_ord)
+ limit = df_size - bank->size * nvm_ord;
+ else
+ limit = 0;
+
+ if (bank->size > limit) {
+ bank->size = limit;
+ LOG_DEBUG("FlexNVM bank %d limited to 0x%08" PRIx32 " due to active EEPROM backup",
+ bank->bank_number, limit);
+ }
+
} else if ((unsigned)bank->bank_number == num_blocks) {
LOG_ERROR("FlexRAM support not yet implemented");
return ERROR_FLASH_OPER_UNSUPPORTED;
return ERROR_FLASH_BANK_INVALID;
}
+ if (bank->bank_number == 0 && ((uint32_t)fcfg2_maxaddr0 << 13) != bank->size)
+ LOG_WARNING("MAXADDR0 0x%02" PRIx8 " check failed,"
+ " please report to OpenOCD mailing list", fcfg2_maxaddr0);
+ if (fcfg2_pflsh) {
+ if (bank->bank_number == 1 && ((uint32_t)fcfg2_maxaddr1 << 13) != bank->size)
+ LOG_WARNING("MAXADDR1 0x%02" PRIx8 " check failed,"
+ " please report to OpenOCD mailing list", fcfg2_maxaddr1);
+ } else {
+ if ((unsigned)bank->bank_number == first_nvm_bank
+ && ((uint32_t)fcfg2_maxaddr1 << 13) != df_size)
+ LOG_WARNING("FlexNVM MAXADDR1 0x%02" PRIx8 " check failed,"
+ " please report to OpenOCD mailing list", fcfg2_maxaddr1);
+ }
+
if (bank->sectors) {
free(bank->sectors);
bank->sectors = NULL;
}
+ if (bank->prot_blocks) {
+ free(bank->prot_blocks);
+ bank->prot_blocks = NULL;
+ }
- bank->num_sectors = bank->size / kinfo->sector_size;
- assert(bank->num_sectors > 0);
- bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
+ if (kinfo->sector_size == 0) {
+ LOG_ERROR("Unknown sector size for bank %d", bank->bank_number);
+ return ERROR_FLASH_BANK_INVALID;
+ }
- for (i = 0; i < bank->num_sectors; i++) {
- bank->sectors[i].offset = offset;
- bank->sectors[i].size = kinfo->sector_size;
- offset += kinfo->sector_size;
- bank->sectors[i].is_erased = -1;
- bank->sectors[i].is_protected = 1;
+ if (kinfo->flash_support & FS_PROGRAM_SECTOR
+ && kinfo->max_flash_prog_size == 0) {
+ kinfo->max_flash_prog_size = kinfo->sector_size;
+ /* Program section size is equal to sector size by default */
}
- return ERROR_OK;
-}
+ bank->num_sectors = bank->size / kinfo->sector_size;
-static int kinetis_probe(struct flash_bank *bank)
-{
- if (bank->target->state != TARGET_HALTED) {
- LOG_WARNING("Cannot communicate... target not halted.");
- return ERROR_TARGET_NOT_HALTED;
+ if (bank->num_sectors > 0) {
+ /* FlexNVM bank can be used for EEPROM backup therefore zero sized */
+ bank->sectors = alloc_block_array(0, kinfo->sector_size, bank->num_sectors);
+ if (!bank->sectors)
+ return ERROR_FAIL;
+
+ bank->prot_blocks = alloc_block_array(0, kinfo->protection_size, bank->num_prot_blocks);
+ if (!bank->prot_blocks)
+ return ERROR_FAIL;
+
+ } else {
+ bank->num_prot_blocks = 0;
}
- return kinetis_read_part_info(bank);
+ kinfo->probed = true;
+
+ return ERROR_OK;
}
static int kinetis_auto_probe(struct flash_bank *bank)
{
struct kinetis_flash_bank *kinfo = bank->driver_priv;
- if (kinfo->sim_sdid)
+ if (kinfo && kinfo->probed)
return ERROR_OK;
return kinetis_probe(bank);
static int kinetis_blank_check(struct flash_bank *bank)
{
struct kinetis_flash_bank *kinfo = bank->driver_priv;
+ int result;
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
+ /* suprisingly blank check does not work in VLPR and HSRUN modes */
+ result = kinetis_check_run_mode(bank->target);
+ if (result != ERROR_OK)
+ return result;
- if (kinfo->flash_class == FC_PFLASH) {
- int result;
+ /* reset error flags */
+ result = kinetis_ftfx_prepare(bank->target);
+ if (result != ERROR_OK)
+ return result;
+
+ if (kinfo->flash_class == FC_PFLASH || kinfo->flash_class == FC_FLEX_NVM) {
+ bool block_dirty = false;
uint8_t ftfx_fstat;
- /* check if whole bank is blank */
- result = kinetis_ftfx_command(bank, FTFx_CMD_BLOCKSTAT, bank->base, 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
+ if (kinfo->flash_class == FC_FLEX_NVM) {
+ uint8_t fcfg1_depart = (uint8_t)((kinfo->sim_fcfg1 >> 8) & 0x0f);
+ /* block operation cannot be used on FlexNVM when EEPROM backup partition is set */
+ if (fcfg1_depart != 0xf && fcfg1_depart != 0)
+ block_dirty = true;
+ }
+
+ if (!block_dirty) {
+ /* check if whole bank is blank */
+ result = kinetis_ftfx_command(bank->target, FTFx_CMD_BLOCKSTAT, kinfo->prog_base,
+ 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
- if (result != ERROR_OK)
- return result;
+ if (result != ERROR_OK || (ftfx_fstat & 0x01))
+ block_dirty = true;
+ }
- if (ftfx_fstat & 0x01) {
+ if (block_dirty) {
/* the whole bank is not erased, check sector-by-sector */
int i;
for (i = 0; i < bank->num_sectors; i++) {
/* normal margin */
- result = kinetis_ftfx_command(bank, FTFx_CMD_SECTSTAT, bank->base + bank->sectors[i].offset,
+ result = kinetis_ftfx_command(bank->target, FTFx_CMD_SECTSTAT,
+ kinfo->prog_base + bank->sectors[i].offset,
1, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
if (result == ERROR_OK) {
bank->sectors[i].is_erased = 1;
}
} else {
- LOG_WARNING("kinetis_blank_check not supported yet for FlexNVM");
+ LOG_WARNING("kinetis_blank_check not supported yet for FlexRAM");
return ERROR_FLASH_OPERATION_FAILED;
}
return ERROR_OK;
}
+
+COMMAND_HANDLER(kinetis_nvm_partition)
+{
+ int result, i;
+ unsigned long par, log2 = 0, ee1 = 0, ee2 = 0;
+ enum { SHOW_INFO, DF_SIZE, EEBKP_SIZE } sz_type = SHOW_INFO;
+ bool enable;
+ uint8_t load_flex_ram = 1;
+ uint8_t ee_size_code = 0x3f;
+ uint8_t flex_nvm_partition_code = 0;
+ uint8_t ee_split = 3;
+ struct target *target = get_current_target(CMD_CTX);
+ struct flash_bank *bank;
+ struct kinetis_flash_bank *kinfo;
+ uint32_t sim_fcfg1;
+
+ if (CMD_ARGC >= 2) {
+ if (strcmp(CMD_ARGV[0], "dataflash") == 0)
+ sz_type = DF_SIZE;
+ else if (strcmp(CMD_ARGV[0], "eebkp") == 0)
+ sz_type = EEBKP_SIZE;
+
+ par = strtoul(CMD_ARGV[1], NULL, 10);
+ while (par >> (log2 + 3))
+ log2++;
+ }
+ switch (sz_type) {
+ case SHOW_INFO:
+ result = target_read_u32(target, SIM_FCFG1, &sim_fcfg1);
+ if (result != ERROR_OK)
+ return result;
+
+ flex_nvm_partition_code = (uint8_t)((sim_fcfg1 >> 8) & 0x0f);
+ switch (flex_nvm_partition_code) {
+ case 0:
+ command_print(CMD_CTX, "No EEPROM backup, data flash only");
+ break;
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ case 6:
+ command_print(CMD_CTX, "EEPROM backup %d KB", 4 << flex_nvm_partition_code);
+ break;
+ case 8:
+ command_print(CMD_CTX, "No data flash, EEPROM backup only");
+ break;
+ case 0x9:
+ case 0xA:
+ case 0xB:
+ case 0xC:
+ case 0xD:
+ case 0xE:
+ command_print(CMD_CTX, "data flash %d KB", 4 << (flex_nvm_partition_code & 7));
+ break;
+ case 0xf:
+ command_print(CMD_CTX, "No EEPROM backup, data flash only (DEPART not set)");
+ break;
+ default:
+ command_print(CMD_CTX, "Unsupported EEPROM backup size code 0x%02" PRIx8, flex_nvm_partition_code);
+ }
+ return ERROR_OK;
+
+ case DF_SIZE:
+ flex_nvm_partition_code = 0x8 | log2;
+ break;
+
+ case EEBKP_SIZE:
+ flex_nvm_partition_code = log2;
+ break;
+ }
+
+ if (CMD_ARGC == 3)
+ ee1 = ee2 = strtoul(CMD_ARGV[2], NULL, 10) / 2;
+ else if (CMD_ARGC >= 4) {
+ ee1 = strtoul(CMD_ARGV[2], NULL, 10);
+ ee2 = strtoul(CMD_ARGV[3], NULL, 10);
+ }
+
+ enable = ee1 + ee2 > 0;
+ if (enable) {
+ for (log2 = 2; ; log2++) {
+ if (ee1 + ee2 == (16u << 10) >> log2)
+ break;
+ if (ee1 + ee2 > (16u << 10) >> log2 || log2 >= 9) {
+ LOG_ERROR("Unsupported EEPROM size");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ if (ee1 * 3 == ee2)
+ ee_split = 1;
+ else if (ee1 * 7 == ee2)
+ ee_split = 0;
+ else if (ee1 != ee2) {
+ LOG_ERROR("Unsupported EEPROM sizes ratio");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ ee_size_code = log2 | ee_split << 4;
+ }
+
+ if (CMD_ARGC >= 5)
+ COMMAND_PARSE_ON_OFF(CMD_ARGV[4], enable);
+ if (enable)
+ load_flex_ram = 0;
+
+ LOG_INFO("DEPART 0x%" PRIx8 ", EEPROM size code 0x%" PRIx8,
+ flex_nvm_partition_code, ee_size_code);
+
+ result = kinetis_check_run_mode(target);
+ if (result != ERROR_OK)
+ return result;
+
+ /* reset error flags */
+ result = kinetis_ftfx_prepare(target);
+ if (result != ERROR_OK)
+ return result;
+
+ result = kinetis_ftfx_command(target, FTFx_CMD_PGMPART, load_flex_ram,
+ ee_size_code, flex_nvm_partition_code, 0, 0,
+ 0, 0, 0, 0, NULL);
+ if (result != ERROR_OK)
+ return result;
+
+ command_print(CMD_CTX, "FlexNVM partition set. Please reset MCU.");
+
+ for (i = 1; i < 4; i++) {
+ bank = get_flash_bank_by_num_noprobe(i);
+ if (bank == NULL)
+ break;
+
+ kinfo = bank->driver_priv;
+ if (kinfo && kinfo->flash_class == FC_FLEX_NVM)
+ kinfo->probed = false; /* re-probe before next use */
+ }
+
+ command_print(CMD_CTX, "FlexNVM banks will be re-probed to set new data flash size.");
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(kinetis_fcf_source_handler)
+{
+ if (CMD_ARGC > 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ if (CMD_ARGC == 1) {
+ if (strcmp(CMD_ARGV[0], "write") == 0)
+ allow_fcf_writes = true;
+ else if (strcmp(CMD_ARGV[0], "protection") == 0)
+ allow_fcf_writes = false;
+ else
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ if (allow_fcf_writes) {
+ command_print(CMD_CTX, "Arbitrary Flash Configuration Field writes enabled.");
+ command_print(CMD_CTX, "Protection info writes to FCF disabled.");
+ LOG_WARNING("BEWARE: incorrect flash configuration may permanently lock the device.");
+ } else {
+ command_print(CMD_CTX, "Protection info writes to Flash Configuration Field enabled.");
+ command_print(CMD_CTX, "Arbitrary FCF writes disabled. Mode safe from unwanted locking of the device.");
+ }
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(kinetis_fopt_handler)
+{
+ if (CMD_ARGC > 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ if (CMD_ARGC == 1)
+ fcf_fopt = (uint8_t)strtoul(CMD_ARGV[0], NULL, 0);
+ else
+ command_print(CMD_CTX, "FCF_FOPT 0x%02" PRIx8, fcf_fopt);
+
+ return ERROR_OK;
+}
+
+
+static const struct command_registration kinetis_security_command_handlers[] = {
+ {
+ .name = "check_security",
+ .mode = COMMAND_EXEC,
+ .help = "Check status of device security lock",
+ .usage = "",
+ .handler = kinetis_check_flash_security_status,
+ },
+ {
+ .name = "halt",
+ .mode = COMMAND_EXEC,
+ .help = "Issue a halt via the MDM-AP",
+ .usage = "",
+ .handler = kinetis_mdm_halt,
+ },
+ {
+ .name = "mass_erase",
+ .mode = COMMAND_EXEC,
+ .help = "Issue a complete flash erase via the MDM-AP",
+ .usage = "",
+ .handler = kinetis_mdm_mass_erase,
+ },
+ { .name = "reset",
+ .mode = COMMAND_EXEC,
+ .help = "Issue a reset via the MDM-AP",
+ .usage = "",
+ .handler = kinetis_mdm_reset,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static const struct command_registration kinetis_exec_command_handlers[] = {
+ {
+ .name = "mdm",
+ .mode = COMMAND_ANY,
+ .help = "MDM-AP command group",
+ .usage = "",
+ .chain = kinetis_security_command_handlers,
+ },
+ {
+ .name = "disable_wdog",
+ .mode = COMMAND_EXEC,
+ .help = "Disable the watchdog timer",
+ .usage = "",
+ .handler = kinetis_disable_wdog_handler,
+ },
+ {
+ .name = "nvm_partition",
+ .mode = COMMAND_EXEC,
+ .help = "Show/set data flash or EEPROM backup size in kilobytes,"
+ " set two EEPROM sizes in bytes and FlexRAM loading during reset",
+ .usage = "('info'|'dataflash' size|'eebkp' size) [eesize1 eesize2] ['on'|'off']",
+ .handler = kinetis_nvm_partition,
+ },
+ {
+ .name = "fcf_source",
+ .mode = COMMAND_EXEC,
+ .help = "Use protection as a source for Flash Configuration Field or allow writing arbitrary values to the FCF"
+ " Mode 'protection' is safe from unwanted locking of the device.",
+ .usage = "['protection'|'write']",
+ .handler = kinetis_fcf_source_handler,
+ },
+ {
+ .name = "fopt",
+ .mode = COMMAND_EXEC,
+ .help = "FCF_FOPT value source in 'kinetis fcf_source protection' mode",
+ .usage = "[num]",
+ .handler = kinetis_fopt_handler,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static const struct command_registration kinetis_command_handler[] = {
+ {
+ .name = "kinetis",
+ .mode = COMMAND_ANY,
+ .help = "Kinetis flash controller commands",
+ .usage = "",
+ .chain = kinetis_exec_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+
+
struct flash_driver kinetis_flash = {
.name = "kinetis",
+ .commands = kinetis_command_handler,
.flash_bank_command = kinetis_flash_bank_command,
.erase = kinetis_erase,
.protect = kinetis_protect,
projects / openocd / blobdiff