* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
+
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
+#include <jtag/jtag.h>
#include "imp.h"
-#include "pic32mx.h"
#include <target/algorithm.h>
#include <target/mips32.h>
#include <target/mips_m4k.h>
+#define PIC32MX_MANUF_ID 0x029
+
+/* pic32mx memory locations */
+
+#define PIC32MX_PHYS_RAM 0x00000000
+#define PIC32MX_PHYS_PGM_FLASH 0x1D000000
+#define PIC32MX_PHYS_PERIPHERALS 0x1F800000
+#define PIC32MX_PHYS_BOOT_FLASH 0x1FC00000
+
+/*
+ * Translate Virtual and Physical addresses.
+ * Note: These macros only work for KSEG0/KSEG1 addresses.
+ */
+
+#define Virt2Phys(v) ((v) & 0x1FFFFFFF)
+
+/* pic32mx configuration register locations */
+
+#define PIC32MX_DEVCFG0_1_2 0xBFC00BFC
+#define PIC32MX_DEVCFG0 0xBFC02FFC
+#define PIC32MX_DEVCFG1 0xBFC02FF8
+#define PIC32MX_DEVCFG2 0xBFC02FF4
+#define PIC32MX_DEVCFG3 0xBFC02FF0
+#define PIC32MX_DEVID 0xBF80F220
+
+#define PIC32MX_BMXPFMSZ 0xBF882060
+#define PIC32MX_BMXBOOTSZ 0xBF882070
+#define PIC32MX_BMXDRMSZ 0xBF882040
+
+/* pic32mx flash controller register locations */
+
+#define PIC32MX_NVMCON 0xBF80F400
+#define PIC32MX_NVMCONCLR 0xBF80F404
+#define PIC32MX_NVMCONSET 0xBF80F408
+#define PIC32MX_NVMCONINV 0xBF80F40C
+#define NVMCON_NVMWR (1 << 15)
+#define NVMCON_NVMWREN (1 << 14)
+#define NVMCON_NVMERR (1 << 13)
+#define NVMCON_LVDERR (1 << 12)
+#define NVMCON_LVDSTAT (1 << 11)
+#define NVMCON_OP_PFM_ERASE 0x5
+#define NVMCON_OP_PAGE_ERASE 0x4
+#define NVMCON_OP_ROW_PROG 0x3
+#define NVMCON_OP_WORD_PROG 0x1
+#define NVMCON_OP_NOP 0x0
+
+#define PIC32MX_NVMKEY 0xBF80F410
+#define PIC32MX_NVMADDR 0xBF80F420
+#define PIC32MX_NVMADDRCLR 0xBF80F424
+#define PIC32MX_NVMADDRSET 0xBF80F428
+#define PIC32MX_NVMADDRINV 0xBF80F42C
+#define PIC32MX_NVMDATA 0xBF80F430
+#define PIC32MX_NVMSRCADDR 0xBF80F440
+
+/* flash unlock keys */
+
+#define NVMKEY1 0xAA996655
+#define NVMKEY2 0x556699AA
+
+#define MX_1_2 1 /* PIC32mx1xx/2xx */
+
+struct pic32mx_flash_bank {
+ struct working_area *write_algorithm;
+ int probed;
+ int dev_type; /* Default 0. 1 for Pic32MX1XX/2XX variant */
+};
+
+/*
+ * DEVID values as per PIC32MX Flash Programming Specification Rev J
+ */
+
static const struct pic32mx_devs_s {
- uint8_t devid;
- char *name;
+ uint32_t devid;
+ const char *name;
} pic32mx_devs[] = {
- {0x38, "360F512L"},
- {0x34, "360F256L"},
- {0x2D, "340F128L"},
- {0x2A, "320F128L"},
- {0x16, "340F512H"},
- {0x12, "340F256H"},
- {0x0D, "340F128H"},
- {0x0A, "320F128H"},
- {0x06, "320F064H"},
- {0x02, "320F032H"},
- {0x07, "795F512L"},
- {0x0E, "795F512H"},
- {0x11, "675F512L"},
- {0x0C, "675F512H"},
- {0x0F, "575F512L"},
- {0x09, "575F512H"},
- {0x17, "575F256H"},
- {0x78, "460F512L"},
- {0x74, "460F256L"},
- {0x6D, "440F128L"},
- {0x56, "440F512H"},
- {0x52, "440F256H"},
- {0x4D, "440F128H"},
- {0x42, "420F032H"},
- {0x00, NULL}
+ {0x04A07053, "110F016B"},
+ {0x04A09053, "110F016C"},
+ {0x04A0B053, "110F016D"},
+ {0x04A06053, "120F032B"},
+ {0x04A08053, "120F032C"},
+ {0x04A0A053, "120F032D"},
+ {0x04D07053, "130F064B"},
+ {0x04D09053, "130F064C"},
+ {0x04D0B053, "130F064D"},
+ {0x04D06053, "150F128B"},
+ {0x04D08053, "150F128C"},
+ {0x04D0A053, "150F128D"},
+ {0x04A01053, "210F016B"},
+ {0x04A03053, "210F016C"},
+ {0x04A05053, "210F016D"},
+ {0x04A00053, "220F032B"},
+ {0x04A02053, "220F032C"},
+ {0x04A04053, "220F032D"},
+ {0x04D01053, "230F064B"},
+ {0x04D03053, "230F064C"},
+ {0x04D05053, "230F064D"},
+ {0x04D00053, "250F128B"},
+ {0x04D02053, "250F128C"},
+ {0x04D04053, "250F128D"},
+ {0x00938053, "360F512L"},
+ {0x00934053, "360F256L"},
+ {0x0092D053, "340F128L"},
+ {0x0092A053, "320F128L"},
+ {0x00916053, "340F512H"},
+ {0x00912053, "340F256H"},
+ {0x0090D053, "340F128H"},
+ {0x0090A053, "320F128H"},
+ {0x00906053, "320F064H"},
+ {0x00902053, "320F032H"},
+ {0x00978053, "460F512L"},
+ {0x00974053, "460F256L"},
+ {0x0096D053, "440F128L"},
+ {0x00952053, "440F256H"},
+ {0x00956053, "440F512H"},
+ {0x0094D053, "440F128H"},
+ {0x00942053, "420F032H"},
+ {0x04307053, "795F512L"},
+ {0x0430E053, "795F512H"},
+ {0x04306053, "775F512L"},
+ {0x0430D053, "775F512H"},
+ {0x04312053, "775F256L"},
+ {0x04303053, "775F256H"},
+ {0x04417053, "764F128L"},
+ {0x0440B053, "764F128H"},
+ {0x04341053, "695F512L"},
+ {0x04325053, "695F512H"},
+ {0x04311053, "675F512L"},
+ {0x0430C053, "675F512H"},
+ {0x04305053, "675F256L"},
+ {0x0430B053, "675F256H"},
+ {0x04413053, "664F128L"},
+ {0x04407053, "664F128H"},
+ {0x04411053, "664F064L"},
+ {0x04405053, "664F064H"},
+ {0x0430F053, "575F512L"},
+ {0x04309053, "575F512H"},
+ {0x04333053, "575F256L"},
+ {0x04317053, "575F256H"},
+ {0x0440F053, "564F128L"},
+ {0x04403053, "564F128H"},
+ {0x0440D053, "564F064L"},
+ {0x04401053, "564F064H"},
+ {0x04400053, "534F064H"},
+ {0x0440C053, "534F064L"},
+ {0x00000000, NULL}
};
/* flash bank pic32mx <base> <size> 0 0 <target#>
struct pic32mx_flash_bank *pic32mx_info;
if (CMD_ARGC < 6)
- {
- LOG_WARNING("incomplete flash_bank pic32mx configuration");
- return ERROR_FLASH_BANK_INVALID;
- }
+ return ERROR_COMMAND_SYNTAX_ERROR;
pic32mx_info = malloc(sizeof(struct pic32mx_flash_bank));
bank->driver_priv = pic32mx_info;
pic32mx_info->write_algorithm = NULL;
pic32mx_info->probed = 0;
+ pic32mx_info->dev_type = 0;
return ERROR_OK;
}
uint32_t status;
/* wait for busy to clear */
- while (((status = pic32mx_get_flash_status(bank)) & NVMCON_NVMWR) && (timeout-- > 0))
- {
+ while (((status = pic32mx_get_flash_status(bank)) & NVMCON_NVMWR) && (timeout-- > 0)) {
LOG_DEBUG("status: 0x%" PRIx32, status);
alive_sleep(1);
}
static int pic32mx_protect_check(struct flash_bank *bank)
{
struct target *target = bank->target;
+ struct pic32mx_flash_bank *pic32mx_info = bank->driver_priv;
+ uint32_t config0_address;
uint32_t devcfg0;
int s;
int num_pages;
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- target_read_u32(target, PIC32MX_DEVCFG0, &devcfg0);
+ if (pic32mx_info->dev_type == MX_1_2)
+ config0_address = PIC32MX_DEVCFG0_1_2;
+ else
+ config0_address = PIC32MX_DEVCFG0;
+
+ target_read_u32(target, config0_address, &devcfg0);
if ((devcfg0 & (1 << 28)) == 0) /* code protect bit */
- num_pages = 0xffff; /* All pages protected */
- else if (Virt2Phys(bank->base) == PIC32MX_PHYS_BOOT_FLASH)
- {
+ num_pages = 0xffff; /* All pages protected */
+ else if (Virt2Phys(bank->base) == PIC32MX_PHYS_BOOT_FLASH) {
if (devcfg0 & (1 << 24))
- num_pages = 0; /* All pages unprotected */
+ num_pages = 0; /* All pages unprotected */
+ else
+ num_pages = 0xffff; /* All pages protected */
+ } else {
+ /* pgm flash */
+ if (pic32mx_info->dev_type == MX_1_2)
+ num_pages = (~devcfg0 >> 10) & 0x3f;
else
- num_pages = 0xffff; /* All pages protected */
+ num_pages = (~devcfg0 >> 12) & 0xff;
}
- else /* pgm flash */
- num_pages = (~devcfg0 >> 12) & 0xff;
for (s = 0; s < bank->num_sectors && s < num_pages; s++)
bank->sectors[s].is_protected = 1;
int i;
uint32_t status;
- if (bank->target->state != TARGET_HALTED)
- {
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if ((first == 0) && (last == (bank->num_sectors - 1))
- && (Virt2Phys(bank->base) == PIC32MX_PHYS_PGM_FLASH))
- {
+ && (Virt2Phys(bank->base) == PIC32MX_PHYS_PGM_FLASH)) {
/* this will only erase the Program Flash (PFM), not the Boot Flash (BFM)
* we need to use the MTAP to perform a full erase */
LOG_DEBUG("Erasing entire program flash");
return ERROR_OK;
}
- for (i = first; i <= last; i++)
- {
+ for (i = first; i <= last; i++) {
target_write_u32(target, PIC32MX_NVMADDR, Virt2Phys(bank->base + bank->sectors[i].offset));
status = pic32mx_nvm_exec(bank, NVMCON_OP_PAGE_ERASE, 10);
static int pic32mx_protect(struct flash_bank *bank, int set, int first, int last)
{
- struct pic32mx_flash_bank *pic32mx_info = NULL;
struct target *target = bank->target;
- pic32mx_info = bank->driver_priv;
-
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
return ERROR_OK;
}
-static const uint32_t pic32mx_flash_write_code[] = {
+/* see contib/loaders/flash/pic32mx.s for src */
+
+static uint32_t pic32mx_flash_write_code[] = {
/* write: */
0x3C08AA99, /* lui $t0, 0xaa99 */
0x35086655, /* ori $t0, 0x6655 */
0x1600FFFD, /* bne $s0, $zero, waitflash */
0x00000000, /* nop */
0x00000000, /* nop */
- 0x00000000, /* nop */
+ 0x00000000, /* nop */
0x00000000, /* nop */
0x00000000, /* nop */
0x8D510000, /* lw $s1, 0($t2) */
struct working_area *source;
uint32_t address = bank->base + offset;
struct reg_param reg_params[3];
+ uint32_t row_size;
int retval = ERROR_OK;
struct pic32mx_flash_bank *pic32mx_info = bank->driver_priv;
/* flash write code */
if (target_alloc_working_area(target, sizeof(pic32mx_flash_write_code),
- &pic32mx_info->write_algorithm) != ERROR_OK)
- {
+ &pic32mx_info->write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
- if ((retval = target_write_buffer(target,
- pic32mx_info->write_algorithm->address,
- sizeof(pic32mx_flash_write_code),
- (uint8_t*)pic32mx_flash_write_code)) != ERROR_OK)
+ /* Change values for counters and row size, depending on variant */
+ if (pic32mx_info->dev_type == MX_1_2) {
+ /* 128 byte row */
+ pic32mx_flash_write_code[8] = 0x2CD30020;
+ pic32mx_flash_write_code[14] = 0x24840080;
+ pic32mx_flash_write_code[15] = 0x24A50080;
+ pic32mx_flash_write_code[17] = 0x24C6FFE0;
+ row_size = 128;
+ } else {
+ /* 512 byte row */
+ pic32mx_flash_write_code[8] = 0x2CD30080;
+ pic32mx_flash_write_code[14] = 0x24840200;
+ pic32mx_flash_write_code[15] = 0x24A50200;
+ pic32mx_flash_write_code[17] = 0x24C6FF80;
+ row_size = 512;
+ }
+
+ retval = target_write_buffer(target, pic32mx_info->write_algorithm->address,
+ sizeof(pic32mx_flash_write_code), (uint8_t *)pic32mx_flash_write_code);
+ if (retval != ERROR_OK)
return retval;
/* memory buffer */
- while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK)
- {
+ while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
buffer_size /= 2;
- if (buffer_size <= 256)
- {
+ if (buffer_size <= 256) {
/* if we already allocated the writing code, but failed to get a
* buffer, free the algorithm */
if (pic32mx_info->write_algorithm)
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- };
+ }
mips32_info.common_magic = MIPS32_COMMON_MAGIC;
mips32_info.isa_mode = MIPS32_ISA_MIPS32;
init_reg_param(®_params[1], "a1", 32, PARAM_OUT);
init_reg_param(®_params[2], "a2", 32, PARAM_OUT);
- while (count > 0)
- {
- uint32_t status;
- uint32_t thisrun_count = (count > (buffer_size / 4)) ?
- (buffer_size / 4) : count;
+ int row_offset = offset % row_size;
+ uint8_t *new_buffer = NULL;
+ if (row_offset && (count >= (row_size / 4))) {
+ new_buffer = malloc(buffer_size);
+ if (new_buffer == NULL) {
+ LOG_ERROR("Out of memory");
+ return ERROR_FAIL;
+ }
+ memset(new_buffer, 0xff, row_offset);
+ address -= row_offset;
+ } else
+ row_offset = 0;
- if ((retval = target_write_buffer(target, source->address,
- thisrun_count * 4, buffer)) != ERROR_OK)
- break;
+ while (count > 0) {
+ uint32_t status;
+ uint32_t thisrun_count;
+
+ if (row_offset) {
+ thisrun_count = (count > ((buffer_size - row_offset) / 4)) ?
+ ((buffer_size - row_offset) / 4) : count;
+
+ memcpy(new_buffer + row_offset, buffer, thisrun_count * 4);
+
+ retval = target_write_buffer(target, source->address,
+ row_offset + thisrun_count * 4, new_buffer);
+ if (retval != ERROR_OK)
+ break;
+ } else {
+ thisrun_count = (count > (buffer_size / 4)) ?
+ (buffer_size / 4) : count;
+
+ retval = target_write_buffer(target, source->address,
+ thisrun_count * 4, buffer);
+ if (retval != ERROR_OK)
+ break;
+ }
buf_set_u32(reg_params[0].value, 0, 32, Virt2Phys(source->address));
buf_set_u32(reg_params[1].value, 0, 32, Virt2Phys(address));
- buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
+ buf_set_u32(reg_params[2].value, 0, 32, thisrun_count + row_offset / 4);
- if ((retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
+ retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
pic32mx_info->write_algorithm->address,
- pic32mx_info->write_algorithm->address + (sizeof(pic32mx_flash_write_code) - 76),
- 10000, &mips32_info)) != ERROR_OK)
- {
+ 0, 10000, &mips32_info);
+ if (retval != ERROR_OK) {
LOG_ERROR("error executing pic32mx flash write algorithm");
retval = ERROR_FLASH_OPERATION_FAILED;
break;
status = buf_get_u32(reg_params[0].value, 0, 32);
- if (status & NVMCON_NVMERR)
- {
+ if (status & NVMCON_NVMERR) {
LOG_ERROR("Flash write error NVMERR (status = 0x%08" PRIx32 ")", status);
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
- if (status & NVMCON_LVDERR)
- {
+ if (status & NVMCON_LVDERR) {
LOG_ERROR("Flash write error LVDERR (status = 0x%08" PRIx32 ")", status);
retval = ERROR_FLASH_OPERATION_FAILED;
break;
buffer += thisrun_count * 4;
address += thisrun_count * 4;
count -= thisrun_count;
+ if (row_offset) {
+ address += row_offset;
+ row_offset = 0;
+ }
}
target_free_working_area(target, source);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
+ if (new_buffer != NULL)
+ free(new_buffer);
return retval;
}
uint32_t status;
int retval;
- if (bank->target->state != TARGET_HALTED)
- {
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
LOG_DEBUG("writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32
" count: 0x%8.8" PRIx32 "", bank->base, offset, count);
- if (offset & 0x3)
- {
+ if (offset & 0x3) {
LOG_WARNING("offset 0x%" PRIx32 "breaks required 4-byte alignment", offset);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
/* multiple words (4-byte) to be programmed? */
- if (words_remaining > 0)
- {
+ if (words_remaining > 0) {
/* try using a block write */
- if ((retval = pic32mx_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK)
- {
- if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
- {
+ retval = pic32mx_write_block(bank, buffer, offset, words_remaining);
+ if (retval != ERROR_OK) {
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
/* if block write failed (no sufficient working area),
* we use normal (slow) single dword accesses */
LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
+ } else if (retval == ERROR_FLASH_OPERATION_FAILED) {
+ LOG_ERROR("flash writing failed");
+ return retval;
}
- else if (retval == ERROR_FLASH_OPERATION_FAILED)
- {
- LOG_ERROR("flash writing failed with error code: 0x%x", retval);
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
- else
- {
+ } else {
buffer += words_remaining * 4;
address += words_remaining * 4;
words_remaining = 0;
}
}
- while (words_remaining > 0)
- {
+ while (words_remaining > 0) {
uint32_t value;
memcpy(&value, buffer + bytes_written, sizeof(uint32_t));
status = pic32mx_write_word(bank, address, value);
- if (status & NVMCON_NVMERR)
- {
+ if (status & NVMCON_NVMERR) {
LOG_ERROR("Flash write error NVMERR (status = 0x%08" PRIx32 ")", status);
return ERROR_FLASH_OPERATION_FAILED;
}
- if (status & NVMCON_LVDERR)
- {
+ if (status & NVMCON_LVDERR) {
LOG_ERROR("Flash write error LVDERR (status = 0x%08" PRIx32 ")", status);
return ERROR_FLASH_OPERATION_FAILED;
}
address += 4;
}
- if (bytes_remaining)
- {
+ if (bytes_remaining) {
uint32_t value = 0xffffffff;
memcpy(&value, buffer + bytes_written, bytes_remaining);
status = pic32mx_write_word(bank, address, value);
- if (status & NVMCON_NVMERR)
- {
+ if (status & NVMCON_NVMERR) {
LOG_ERROR("Flash write error NVMERR (status = 0x%08" PRIx32 ")", status);
return ERROR_FLASH_OPERATION_FAILED;
}
- if (status & NVMCON_LVDERR)
- {
+ if (status & NVMCON_LVDERR) {
LOG_ERROR("Flash write error LVDERR (status = 0x%08" PRIx32 ")", status);
return ERROR_FLASH_OPERATION_FAILED;
}
pic32mx_info->probed = 0;
device_id = ejtag_info->idcode;
- LOG_INFO("device id = 0x%08" PRIx32 " (manuf 0x%03x dev 0x%02x, ver 0x%02x)",
+ LOG_INFO("device id = 0x%08" PRIx32 " (manuf 0x%03x dev 0x%04x, ver 0x%02x)",
device_id,
(unsigned)((device_id >> 1) & 0x7ff),
- (unsigned)((device_id >> 12) & 0xff),
+ (unsigned)((device_id >> 12) & 0xffff),
(unsigned)((device_id >> 28) & 0xf));
if (((device_id >> 1) & 0x7ff) != PIC32MX_MANUF_ID) {
return ERROR_FLASH_OPERATION_FAILED;
}
- page_size = 4096;
+ /* Check for PIC32mx1xx/2xx */
+ for (i = 0; pic32mx_devs[i].name != NULL; i++) {
+ if (pic32mx_devs[i].devid == (device_id & 0x0fffffff)) {
+ if ((*(pic32mx_devs[i].name) == '1') || (*(pic32mx_devs[i].name) == '2'))
+ pic32mx_info->dev_type = MX_1_2;
+ break;
+ }
+ }
+
+ if (pic32mx_info->dev_type == MX_1_2)
+ page_size = 1024;
+ else
+ page_size = 4096;
- if (Virt2Phys(bank->base) == PIC32MX_PHYS_BOOT_FLASH)
- {
+
+ if (Virt2Phys(bank->base) == PIC32MX_PHYS_BOOT_FLASH) {
/* 0x1FC00000: Boot flash size */
#if 0
/* for some reason this register returns 8k for the boot bank size
}
#else
/* fixed 12k boot bank - see comments above */
- num_pages = (12 * 1024);
+ if (pic32mx_info->dev_type == MX_1_2)
+ num_pages = (3 * 1024);
+ else
+ num_pages = (12 * 1024);
#endif
- }
- else
- {
+ } else {
/* read the flash size from the device */
if (target_read_u32(target, PIC32MX_BMXPFMSZ, &num_pages) != ERROR_OK) {
- LOG_WARNING("PIC32MX flash size failed, probe inaccurate - assuming 512k flash");
- num_pages = (512 * 1024);
+ if (pic32mx_info->dev_type == MX_1_2) {
+ LOG_WARNING("PIC32MX flash size failed, probe inaccurate - assuming 32k flash");
+ num_pages = (32 * 1024);
+ } else {
+ LOG_WARNING("PIC32MX flash size failed, probe inaccurate - assuming 512k flash");
+ num_pages = (512 * 1024);
+ }
}
}
LOG_INFO("flash size = %" PRId32 "kbytes", num_pages / 1024);
+ if (bank->sectors) {
+ free(bank->sectors);
+ bank->sectors = NULL;
+ }
+
/* calculate numbers of pages */
num_pages /= page_size;
bank->size = (num_pages * page_size);
bank->num_sectors = num_pages;
bank->sectors = malloc(sizeof(struct flash_sector) * num_pages);
- for (i = 0; i < (int)num_pages; i++)
- {
+ for (i = 0; i < (int)num_pages; i++) {
bank->sectors[i].offset = i * page_size;
bank->sectors[i].size = page_size;
bank->sectors[i].is_erased = -1;
return ERROR_FLASH_OPERATION_FAILED;
}
- for (i = 0; pic32mx_devs[i].name != NULL; i++)
- {
- if (pic32mx_devs[i].devid == ((device_id >> 12) & 0xff)) {
+ for (i = 0; pic32mx_devs[i].name != NULL; i++) {
+ if (pic32mx_devs[i].devid == (device_id & 0x0fffffff)) {
printed = snprintf(buf, buf_size, "PIC32MX%s", pic32mx_devs[i].name);
break;
}
}
- if (pic32mx_devs[i].name == NULL) {
+ if (pic32mx_devs[i].name == NULL)
printed = snprintf(buf, buf_size, "Unknown");
- }
buf += printed;
buf_size -= printed;
- printed = snprintf(buf, buf_size, " Ver: 0x%02x",
+ snprintf(buf, buf_size, " Ver: 0x%02x",
(unsigned)((device_id >> 28) & 0xf));
return ERROR_OK;
int status, res;
if (CMD_ARGC != 3)
- {
- command_print(CMD_CTX, "pic32mx pgm_word <addr> <value> <bank>");
- return ERROR_OK;
- }
+ return ERROR_COMMAND_SYNTAX_ERROR;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], address);
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
if (ERROR_OK != retval)
return retval;
- if (address < bank->base || address >= (bank->base + bank->size))
- {
+ if (address < bank->base || address >= (bank->base + bank->size)) {
command_print(CMD_CTX, "flash address '%s' is out of bounds", CMD_ARGV[0]);
return ERROR_OK;
}
struct mips_ejtag *ejtag_info;
int timeout = 10;
- if (CMD_ARGC < 1)
- {
+ if (CMD_ARGC < 1) {
command_print(CMD_CTX, "pic32mx unlock <bank>");
- return ERROR_OK;
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
struct flash_bank *bank;
/* first check status of device */
mchip_cmd = MCHP_STATUS;
mips_ejtag_drscan_8(ejtag_info, &mchip_cmd);
- if (mchip_cmd & (1 << 7))
- {
+ if (mchip_cmd & (1 << 7)) {
/* device is not locked */
command_print(CMD_CTX, "pic32mx is already unlocked, erasing anyway");
}
/* unlock/erase device */
- mchip_cmd = MCHP_ASERT_RST;
- mips_ejtag_drscan_8(ejtag_info, &mchip_cmd);
+ mips_ejtag_drscan_8_out(ejtag_info, MCHP_ASERT_RST);
+ jtag_add_sleep(200);
- mchip_cmd = MCHP_ERASE;
- mips_ejtag_drscan_8(ejtag_info, &mchip_cmd);
+ mips_ejtag_drscan_8_out(ejtag_info, MCHP_ERASE);
do {
mchip_cmd = MCHP_STATUS;
mips_ejtag_drscan_8(ejtag_info, &mchip_cmd);
- if (timeout-- == 0)
- {
+ if (timeout-- == 0) {
LOG_DEBUG("timeout waiting for unlock: 0x%" PRIx32 "", mchip_cmd);
break;
}
alive_sleep(1);
} while ((mchip_cmd & (1 << 2)) || (!(mchip_cmd & (1 << 3))));
- mchip_cmd = MCHP_DE_ASSERT_RST;
- mips_ejtag_drscan_8(ejtag_info, &mchip_cmd);
+ mips_ejtag_drscan_8_out(ejtag_info, MCHP_DE_ASSERT_RST);
/* select ejtag tap */
mips_ejtag_set_instr(ejtag_info, MTAP_SW_ETAP);
static const struct command_registration pic32mx_exec_command_handlers[] = {
{
.name = "pgm_word",
+ .usage = "<addr> <value> <bank>",
.handler = pic32mx_handle_pgm_word_command,
.mode = COMMAND_EXEC,
.help = "program a word",
.name = "pic32mx",
.mode = COMMAND_ANY,
.help = "pic32mx flash command group",
+ .usage = "",
.chain = pic32mx_exec_command_handlers,
},
COMMAND_REGISTRATION_DONE
.erase = pic32mx_erase,
.protect = pic32mx_protect,
.write = pic32mx_write,
+ .read = default_flash_read,
.probe = pic32mx_probe,
.auto_probe = pic32mx_auto_probe,
- .erase_check = default_flash_mem_blank_check,
+ .erase_check = default_flash_blank_check,
.protect_check = pic32mx_protect_check,
.info = pic32mx_info,
};